Thank you Sir Jeff, been following you for a a long time. This helps a lot especially for people like us that can't afford proper training. Really really helpful. Godspeed and more power!
Jeff, I am unable to use the 'compute materials' command as no alignment or sample line group appears when I try it. However, I have created multiple alignments, corridors and intersections. Any ideas on why?? Thanks.
Great tutorial! I've been doing the same steps but when to select the corridor shapes when computing materials, Civil 3d wont show any options to me, even tho my shapes on code set styles are all set.. Any ideas on how to solve this?
Thank you! Is it possible to apply materials to layers for the assembly without having to apply the assembly to a corridor to produce Section Views? I asked because I just need draft cross section views on assemblies for future roadways, not proposed roadways. Thanks again!
Thank you very much. The video is very much informative. Can you please make a video in civil 3d for design of road which have drain on both sides . The drain joins by slope of road and drain and road are have opposite design level.
Hi Jeff, Are these shape code styles available in ANZ country kit? cause lot of style are not available. if not, how can I get them and use in ANZ template? please let me know.thanksMir
hello jeff.tanx for best civil3d video.i have a problem,i need to calculate Cut or Fill Elevation in edge of my shoulder (starting dayligt slope) in cross secs.then report in table (Xml or Xlsx file)and if this elevation is more than 7m, then civil3d change the slope of cut or fill in daylight, plz help with a toturial video.tanx
Jeff Pls will you provide the full Toutor from starting to finish road design in one continuse video adn share the templets that you are yousing in your all tutore Tnx
sir, please i'm having problem in the profile with my proposed data, it is not always out of proposing the road. can you please send me a drawing template that should be using in my design. because the main problem i'm having is setting. or what will it take for me to get the full tutorial on Civil 3D ? complete tutorials.
Hi, very good video. I have a problem with the intersections, it doesn't compute the materials when it pass in one. Do you have any idea why it's this happening or even a recomendation?
Everything I create these days is freely available on my TH-cam channel. That said, a couple years ago I recorded a 13 hour Civil 3D training course for LinkedIn Learning. If you are interested, you can find it here - lynda.com/jeffbartels Thank you for your support!
Hello, Jeff, could you please help out and send me the file with the road you have there in the video. One of my professors in university gave us an assignment to compare microstations and autodesks ability to calculate these structural volumes, but we are geodesy students, so we have never done something like this, so it is rather hard to start this whole project from scratch. So I am hoping, you could help out
Your structural volume report is wrong Because of station between length The station length should be more the sample line offcet Because of road slop profile Every road should have longitudinal slope it's should be calculated in length
you are saving my life Jeff. can't say enough about how much help these videos are. 12 thumbs up
Thank you so much for the kind words!
YOU SAVED MY LIFE. I've been trying for an hour to figure out what i was doing wrong.
You're welcome! Thank you for your support!
Thank you Sir Jeff, been following you for a a long time. This helps a lot especially for people like us that can't afford proper training. Really really helpful. Godspeed and more power!
Glad to help
The best video about road designing in civil 3d. Thank you very very much
You are welcome! So glad to hear the content was helpful!
thank you for the detailed explanation and your good work.
Best channel on TH-cam ever! You're awesome Jeff.
Excellent. Very comprehendable and usable tutorial. Keep up with the good work.
Thank you Jovan for the kind words!
How do you get the total volume per material? Just sum the data on the reports (for each matl of course)? Or is there a quicker way from C3D? Thanks!
What Tipe Asembly have you used for daylight , I See you have and extra space after the edge of pavement, what do you do ?
Jeff, I am unable to use the 'compute materials' command as no alignment or sample line group appears when I try it. However, I have created multiple alignments, corridors and intersections. Any ideas on why?? Thanks.
Best explainer thanks jeff ❤
Great tutorial! I've been doing the same steps but when to select the corridor shapes when computing materials, Civil 3d wont show any options to me, even tho my shapes on code set styles are all set.. Any ideas on how to solve this?
Thank you! Is it possible to apply materials to layers for the assembly without having to apply the assembly to a corridor to produce Section Views? I asked because I just need draft cross section views on assemblies for future roadways, not proposed roadways.
Thanks again!
Thank you very much!
Excellent tutorial
Thank you very much. The video is very much informative. Can you please make a video in civil 3d for design of road which have drain on both sides . The drain joins by slope of road and drain and road are have opposite design level.
Hi Jeff, Are these shape code styles available in ANZ country kit? cause lot of style are not available. if not, how can I get them and use in ANZ template? please let me know.thanksMir
Thanks again jeff for this video...
Thank you Jeff you're the best.
You are very welcome! I appreciate the kind words!
hello jeff.tanx for best civil3d video.i have a problem,i need to calculate Cut or Fill Elevation in edge of my shoulder (starting dayligt slope) in cross secs.then report in table (Xml or Xlsx file)and if this elevation is more than 7m, then civil3d change the slope of cut or fill in daylight, plz help with a toturial video.tanx
hello, could you share the file that has been used in this tutorial for practicing purposes?
I have more than 4 courses. How can we add more shape code in that assembly and earthwork volume takeoff area?
I have the same question.
Excelente Jeff.
So glad to hear the content is helpful!
How can I export road distance in compute materia? Can you help me?
Jeff Pls will you provide the full Toutor from starting to finish road design in one continuse video adn share the templets that you are yousing in your all tutore Tnx
sir, please i'm having problem in the profile with my proposed data, it is not always out of proposing the road. can you please send me a drawing template that should be using in my design. because the main problem i'm having is setting. or what will it take for me to get the full tutorial on Civil 3D ? complete tutorials.
Really great video
Hi, very good video. I have a problem with the intersections, it doesn't compute the materials when it pass in one. Do you have any idea why it's this happening or even a recomendation?
th-cam.com/video/GfxyXQ4YPEk/w-d-xo.html
Thant is great Jeff, A useful video
Thank you for the kind words! I'm glad the recording is helpful!
@@JeffBartelsCAD Please can you share any video for pay items
Thanks USEFUL WITH GOOD EXPLANATION
Thank you so much for your support!
I extract the quantities from landxml file is much faster. You do not have to generate for each alignment separately
Hey Jeff I hope you see this!! When using the subassembly "LaneOutsideSuperLayerVaryingWidth" can you compute materials?
Hi Anna, do you solved this problem?
mil gracias!
dear Jeff...how and from where we can buy your professional courses....thanks
Everything I create these days is freely available on my TH-cam channel. That said, a couple years ago I recorded a 13 hour Civil 3D training course for LinkedIn Learning. If you are interested, you can find it here - lynda.com/jeffbartels Thank you for your support!
Hello, Jeff, could you please help out and send me the file with the road you have there in the video. One of my professors in university gave us an assignment to compare microstations and autodesks ability to calculate these structural volumes, but we are geodesy students, so we have never done something like this, so it is rather hard to start this whole project from scratch. So I am hoping, you could help out
Respect from Pakistan great lecture sir.... but how we can show culvert in both plan and profile with elevation
Thank you very much.....
You are most welcome
very nice!
Sir plz tell me if i have survey data easting northing and elevation and i have already prposed elevation list how i will calculte cut and fill data
hi Muhammad Ahmad did you solve the problem. I have same problem.
Hats off!
can i ask you something
Excellent
good work sir
kelly ekere Thank you so much for your support!
Nice video
Thankyou
thanks
You're welcome!
greatest
Your structural volume report is wrong
Because of station between length
The station length should be more the sample line offcet
Because of road slop profile
Every road should have longitudinal slope it's should be calculated in length
Hd