UNBRICK GUIDE XIAOMI REDMI 9A/9C WITHOUT AUTH! OFFLINE FLASHING ! 2021 EXCLUSIVE
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- Contact Support Telegram :t.me/tthackstudio
Downloads : FLASH TOOL DRIVER BYPASS TOOL
drive.google.c...
LIB USB : sourceforge.ne...
PYTHON 3.91 : www.python.org...
Python CODE : python -m pip install pyusb pyserial json5
unbrick dandelion
HOW TO UNBRICK XIAOMI REDMI 9A
REDMI 9A SYSTEM HAS BEN DESTROYED
REDMI 9A STUCK AT MI LOGO
How to unbrick REDMI 9A
REDMI 9A UNBRICK
UNBRICK REDMI 9A WITHOUT AUTHORISED ACCOUNT
REDMI 9A BYPASS FRP MI ACCOUNT
UNBRICK XIAOMI MTK MODELS WITHOUT AUTH
[GUIDE][UNBRICK] How unbrick your bootloop in after flashing TWRP (Xiaomi Redmi 9A
Redmi 9A İnceleme | Cüzdanınızın dostu Redmi 9A
Xiaomi Redmi 9 hard brick
How to Unbrick/Unroot Xiaomi Android Stuck on Fastboot!
Xiaomi Redmi 9 hard brick
UNBRICK REDMI NOTE 8 PRO WITHOUT AUTHORISED MI ID ! OFFLINE FLASHING 2021 FREE EXCLUSIVE
How To Flash Redmi 9A/Redmi 9 Or Any Xiaomi Phone With MI Flash Tool Without Losing Data!!
Yetkili hesap olmadan Xiaomi MTK cihazlara yazılım atmak 2021
DOWNGRADE REDMI 9A FIRMWARE
![[[OFFICIAL MV]] เอิ้นขวัญให้อ้าย- อ๊ะอาย สกุณาพร | ค่ายเพลงเป็นหนึ่ง](http://i.ytimg.com/vi/83x6L3X3qh0/mqdefault.jpg)
Usb not recognise error show and device not connected
Same
@@kakashi7113same problem bro any solution
You need to get a high quality cable
help , it stays in the red bar for me and it doesn't happen and it comes out at the end:
error: status_ext_ram_exception (0xC0050005)
thank you so much sir, my 9A booted again. (mine is bootloop and can't enter fastboot or recovery after flashing recovery.img on the twrp)
but first I got an error when I try to enter the command on the cmd, it turns out you just need to change the _python_ to _py_ , so it should be py -m pip install pyusb pyserial json5
Hope it works for others too
Your video is help to me. I successfully unbrick my phone. Thanks and best regards.
When im on sp flash tool and press download it show me error:
status brom cmd start cmd fail
How can i solve it?
Did you uncheck the cust partition before pressing download? thats the only thing different i saw him do. I also get the same brom error everytime. i think its due to lack of authorized account . i dont think there is a way to buypass the sla and da check that occurs. im going to try his way before i quit.
One problem the phone does not get rec9gnized after i downloaded mediatek driver
Did you find any way to solve it? I used sp flash tool first and it did something similar now my mobile doesn't recognize my pc anymore
my mobile is bricked hardly. the windows says usb device is not recognized. already tried installing several drivers but didn't work. what to do? please help
Same problem bro any solution 😢
Same issue
kisi ka solve hua kya ... hua tha detect ,show kuch... please reply
@@anku3938 Remove the battery pin and try 👍
thank you so much man. its working :) i applied to redmi 6a.
Abi abone ol 😎
@@TTHacKStudio oldum :)
@@TTHacKStudio kanka edl moda nasıl alcam la
@@lostfxo KANKA NE EDL BU MTK ))) SES ALMA ACMA TUSLARI AYNI ANDA BAS USB TAK
@@TTHacKStudio Teşekkür ederim knk
what can I do? My case is "usb device not recognized" when install libusb. Please help.
Same problem bro any solutions 😢
did you get it or not... please reply
Thank you this working for redmi 9a
Working fine, device is same (dandelion) .. 👌
👍 like and subscribe bro
can u provide the dl link of the firmware you used in sp flash tool? TIA
Sir, i flashing ENG firmware forgot delete cust, after flashing procede to flash stock firmware and get black screen, u have solutions?
Is this work for softbrick phone? My friend's phone got softbrick after failed ubl instant
thanks bro , life saver
brother please help, my device isnt showing in the list where i have to press volume button and connect
why its not working for mee like yours while adding scater file , without process files addingjust in 1 second
any one can help me . whats is problem .
Pls get me the link to that scatter file that your using please
redmi 9c black screen, when i plug to PC = unknown device , this video doesnt work.
can you help me, after brom detects phone it goes blue screen of death and after that brom gives an error
on cmd,wont detect my device ..redmi 9
driver update
CMD error could not find a version that satisfies the requirements pyserial (from version: none)
Error No matching distribution for pyserial
please help me bro mediatek port is not available for me my phone is redmi 9a
please find me a solution bro this is the only phone i have bro
unlock the bootloader and try to install a rom when restarting it no longer showed signs of life the device does not enter neither revovery nor fastboot with this tutorial they think it will be fixed I hope your support thanks
где прошивку скачать помоги?
все есть установил прошивку не могу найти
redmi 9a
Bro my device not detected
the pytone command not working with cmd whats problem/
Hello,
I can't find the dandilion folder in the description. how can i get it.
Why did you uncheck the cust partition?
my device doesn't show mtk driver in usb lib
thyanks you save my life bro
Do i need to remove battery first?
Any solution for Redmi Note 8 bricked on miui logo and locked bootloader?
Sir, I received an error on the cmd step.
ERROR: Could not find a version that satisfies the requirement pyusb ( from version: none )
ERROR: No matching distribution found for pyusb
Please help
my phone is not detected in libusb win32 why is that?
Can I use this method for poco c3?
any version of python whose can use at windows7 ?? pleasee help me.. my redmi9 bricked.. stuck at mi logo an always restart self
Use python 3.8.6 for windows 7
its worked for me
I can't open CMD for crypthon
я один заметил то что ты из снг?
Redmi 9A black brick can be repaired?
mine did not boot or turn on
it doesn't need to install the driver bro
restart your computer and disable the drivers signature before launch windows.
Hi everyone, I'm stuck at 4. Step; so when I connect my phone to the computer and press +, the device does not appear in the list. Windows keep pops down the corner and saying usb device doesn't reconized.
use different usb cable and change ports
@@DarisYT thank you :)
@@cio09k i actually have the same issue now and cant fix it 😅
Same issue, how to fix
How about redmi note 9 pro is it can?
Hello Sir,
My Pocophone is hardbricked.
Cannot flash using Edl mode without Mi Authorised Account.
Can i restore my hardbricked phone ? if there is any solution please post
Poco f1 or another model?
Is this possible on a locked bootloader?
What to do if it freezes Download DA 100% In sp flash does not show chip data
try other firmware
Thanks
link me poora file nahi he bhai
please English
benim telefonum 9c formattan sonra mi hesabında kaldı. bootloader kilidi de kapalı... Ne yapabilirim?
zor kardeş.. Ücretli hizmetler var bunun için..
Thanks bro
Does it work on windows 11 ? Please hepl me. Thanks you
working
Sir baypas mi account it working?
Hello friend I would like to know, if this works on the pocophone f1, my device is on hard brcki, it doesn't turn on.
poco f1 is qualcom 845..This method for mtk
Саламалейкум не могу найти Scatter файл где можно скачать
where can i get the rom? thank you!
Full flash same condition hang logo
спасибо, раскирпичился
make video on redmi note 10 plz
genius
Porque no flashear el cust ?
brom ok, Download DA 100% And nothing happend. ERROR: STATUS_EXT_RAM_EXEPTION (0xC0050005) after 2 min
Prueba con sp fashtool v5.1952
Where is images files
Не работает
phyton gak bs di instal di win8 om... apa harus ke win7
format .exe.asc yg exe doang apa ada di versi bawah ya?
I had a issue while flashing the rom via SP Flash Tool:
First of all, I'm pretty sure that I had installed the driver correctly and then I used the latest SP Flash Tool 5.2216 version, and I also bypassed the protection of brom and I also used a custom DA. So the problem is when I tried to flash the rom via the tool, I bypassed and clicked the download button but it stucked at the red bar Download DA 100%, I only have this phone, please tell me the solution
Sir did you have a soluction for your problem ? am having same issue
@@souhailsboui6022 I fixed it by flashing China MIUI 12.0.16 through, I hope this can help you.
@@cup_of_air5079 THANK YOU SO MUCH BRO YOU FIXED MY PROBLEM
thanks dude for guide, can u have solution for enable mass storage at redmi 9a miui 12?help me for recovery my file
:)
it is inpossible )
@@TTHacKStudio okey thanks dude
ojo da es para note 9 error
any solution for baseband ?
try meta
Bro please how can I fix for redmi 8 hard brick without authorization?
on my channel yes video for Redmi note 8 pro
you need chimera tool or umt
for redmi 9 please
Bootloader açıkken bu şekilde brick olursa yaptığın şekilde yapabilir miyim ? Lütfen yanıtla cesaret alıp rahatça rom yuklerim olur dersen :)
How to Bypass mi account Redmi9a miui12 locked bootloader no relocked?
Open flash tool and go the format manual format hex Adress Mi Account Remove
0x47000000
0x3000000
FRP bypass
0x3bd88000
0x100000
@@TTHacKStudio connect WiFi relocked
@@k.h-fix2291 I did not have such a device. I need to test
me funciono con la version de mui 12.0.17 global . Para entrar al modo edl use un programa alterno ya que con el comando de cmd no me funciono.Para recuperar imei despues use rom de ingeniero y el programa moden meta
Podrías decirme el nombre de las aplicaciones q usaste xfa vor?
bro tienes alguna solucion a lo que me pasa, intente usar sp flash tool se quedo atascado instalando la rom oficial y ahora el pc no me reconoce el movil
I will try;((
Not working on Redmi 9🤢
@@TTHacKStudio is mediatek
@@TTHacKStudio mt 6768
@@mulaat0 codeload.github.com/MTK-bypass/exploits_collection/zip/master download this expolit and copy the mt6768 bi to payload folder and try
@@TTHacKStudio okk, thank u
@@TTHacKStudio still not working
give me firmware link please..thankyu
model? 9A or C
9a
No pc pls 🙏🥺🥺😩
Does it work on a Xiaomi Mi 10 T Pro?
@@thordoctor_ no
Not working , Sir
After flashing "botloop"
Help me..
Flash india firmware or downgrade try
@@TTHacKStudio Fine, I'll try
sp flash tool not working pls help
install mi flash pro go location installation find here splash tool
@@TTHacKStudio thanks, already figured that out
Is this possible on a locked bootloader?
Yes
@@TTHacKStudio Can I get a link to the firmware file?
@@honjiida c.mi.com go here download miui rom section
@@TTHacKStudio Thanks very much