That is fantastic, Kruno can you tell me, how to active the power dissipation item on the top ribbon because when I click on it the parts colour have not changed like your parts on mounting panel then when go to instance part ABB part what you showed and typed power then power dissipation came up, for me nothing is coming up. Maybe needs to go to setting. I do appreciate it if you kindly give me hints
Hello Farhad. If you use the power dissipation functionality and the color does not change its most likely one of two things: 1) Missing Project Settings (Frequency, Sim Factor and Voltage needs to filled out) 2) Missing Part Properties ( Max. power dissipation needs to be filled out) Hope this helps Best Regards Kruno
Hi Uncle Kruno I'm Struggeling a bit with the Power Dissipation Calculation feature you show here: I have defined Air-condition field to be: 2 And added all needed values according to your video But still when i try to use the calculation function, the Air-conditioning field does not show in the message box. I have imported and created this cabinet myself from scratch, maybe something is missing? I see that it works with a standard Rittal cabinet from Eplan Data Portal. Any tips?
I used to have a mentor who said the power dissipation of wires is negligible, if you follow standards you shall have enough "air" in the wire-duct, as we discussed in this video: th-cam.com/video/YIav2MigehA/w-d-xo.html
Is there a way to enter a different voltage (i.e. Thermal design: Voltage ) not on the list? The highest is 460V, but what about non-US countries using 575 aka 600V? is there a solution pending or workaround available for now?
Hello Sir. Thank you for this question. As for now it does not look like you can select for the calculation any other than the predefined values. If you are missing values, please contact your support team, they will ultimately guide you to a software wish form. Feedbacks like yours are essential for the continuous improvement of our software. Best Regards Kruno
Hi Kruno, can you make a full tutorial from the scratch? Example a DOL Starter in 3D model. Showing the assignment of the eletrical componets with symbols of the eletrical schematic. Exhibiting the basics fundamentals and work principles for beginners.
Thank you for your request Joao. I am working on a concept for a series of videos for beginners. It will take some time to finish them though. Appreciate your support.
hi kruno, i would like to know how to enter the air flows, the areas reserved for the correct operation of the air conditioner and finally the optimal refrigeration area, because sometimes we use air conditioners that are not present in the data portal.
Hello Simone. Thank you for your question. The enhanced functionality of thermal design integration ( Optimally air conditioned area, air flow arrows and reserved areas) are exclusively available for RITTAL components from the Data Portal. There is unfortunately not a possibility to add this information manually on other parts. Best Regards Kruno
![Shareปลาวาฬ ส่งท้าย SS1 พาเปียโน ขึ้น Ferrari ก่อนไปขาย แลก Nissan l [Nickynachat]](http://i.ytimg.com/vi/KAknGkTNIvg/mqdefault.jpg)
Just got to implement this tool, awesome feature and great video Kruno!
That is fantastic, Kruno can you tell me, how to active the power dissipation item on the top ribbon because when I click on it the parts colour have not changed like your parts on mounting panel then when go to instance part ABB part what you showed and typed power then power dissipation came up, for me nothing is coming up. Maybe needs to go to setting. I do appreciate it if you kindly give me hints
Hello Farhad.
If you use the power dissipation functionality and the color does not change its most likely one of two things:
1) Missing Project Settings (Frequency, Sim Factor and Voltage needs to filled out)
2) Missing Part Properties ( Max. power dissipation needs to be filled out)
Hope this helps
Best Regards
Kruno
Hi Uncle Kruno
I'm Struggeling a bit with the Power Dissipation Calculation feature you show here:
I have defined Air-condition field to be: 2
And added all needed values according to your video
But still when i try to use the calculation function, the Air-conditioning field does not show in the message box.
I have imported and created this cabinet myself from scratch, maybe something is missing?
I see that it works with a standard Rittal cabinet from Eplan Data Portal.
Any tips?
What's about the power dissipation of the wires?
I used to have a mentor who said the power dissipation of wires is negligible, if you follow standards you shall have enough "air" in the wire-duct, as we discussed in this video:
th-cam.com/video/YIav2MigehA/w-d-xo.html
Can we generate calculation report ?
Yes you can 😎
@@eplaninanutshell Great
Is there a way to enter a different voltage (i.e. Thermal design: Voltage ) not on the list? The highest is 460V, but what about non-US countries using 575 aka 600V? is there a solution pending or workaround available for now?
Hello Sir.
Thank you for this question. As for now it does not look like you can select for the calculation any other than the predefined values.
If you are missing values, please contact your support team, they will ultimately guide you to a software wish form.
Feedbacks like yours are essential for the continuous improvement of our software.
Best Regards
Kruno
@@UncleKruno I found out this has nothing to do with the calculation but more to do with the Rittal equipment selection (and its operating voltage).
Hi Kruno, can you make a full tutorial from the scratch? Example a DOL Starter in 3D model.
Showing the assignment of the eletrical componets with symbols of the eletrical schematic.
Exhibiting the basics fundamentals and work principles for beginners.
Thank you for your request Joao.
I am working on a concept for a series of videos for beginners.
It will take some time to finish them though.
Appreciate your support.
@@UncleKruno i will wait for them 😉
hi kruno, i would like to know how to enter the air flows, the areas reserved for the correct operation of the air conditioner and finally the optimal refrigeration area, because sometimes we use air conditioners that are not present in the data portal.
Hello Simone. Thank you for your question. The enhanced functionality of thermal design integration ( Optimally air conditioned area, air flow arrows and reserved areas) are exclusively available for RITTAL components from the Data Portal. There is unfortunately not a possibility to add this information manually on other parts.
Best Regards
Kruno