Maiden flight Black Horse Model Ryan Sta JR 28X JR RG1131BPU 11chl receiver 8x SPEKTRUM A6150 HV servo 2X GREATCELLS Z-30 BIELA 17x10 Custom Dave Brown Vortech 3 blade Spinner SUVILLIAN proflex fuel tubing
Beautiful plane! The Ryan Sta was a racing plane so if you want better performance try a 17x8 2 blade prop. 2 blade props are more efficient so this will give you more thrust and speed! The 17x10 3 blade is to much for this engine. The manual recommends 16x8 to 18x6 2 blade. When you add a blade you generally reduce pitch by 2. Just a friendly suggestion:-)
Thanks. I'm flying with 16x8 3 blade now. 17x10 3blade fly slow. I bought the ramoser vario prop 17inch. Can be adjustable pitch. Havent try to fly with this yet
Beautiful! Just bought the same Plane and thinking of using the same engine. How in the world did you get the Cowl to fit over the 2 exposed cylinders? Do the polished metal inserts in the cowl behind the cylinder have something to do with it?
Hi Ken, you need to cut the big square opening on both side to fit the cowling .The metal sheet its actually to cover the opening hole and i did some airbrush on it to bring some hot surface & oil effects to look more natural .without the plate to cover will look ugly on the cowling with holes for your engine cylinder
Ok, strange choice to put a radial engine in an aircraft that had an inline engine, but it works and sounds nice. Probably cools better as well. Also it looked to me like you have too much throw dialed into your elevator - causing porpoising on landing. Great looking aircraft. Nice video.
Hi... Thanks for the video of this awesome model. I was wondering if you have had any problems with this engine mounted in this way ??? I'm looking to put one of these in an ESM FW-190 and mounting the engine the same way as you did, to use the scale exhaust troughs for cylinder cooling. Also, sorry if I missed the details, but what exhaust are you using? Kindest regards, Rob.
Hi thanks. I have no issue flying the engine mounted like this .im using the stock exhaust (flexible pipe)extended with aluminium tube/pipe to bring it out from cowling.but your esm fw-190 is with round cowling which i think no issue mounting it in any direction
@@vicyboy12 Hi again, sorry... Is there any way I might see any photos of your engine and radio installation, as I want to get it right !!! Thanks again, Rob.
@@vicyboy12 Hi, if you could send them to thommozero@bigpond.com. it would be greatly appreciated... Kindest regards, Rob. ( Sorry, just fixed up that email address... Looking forward to hearing from you.)
![Exclusive! น้องลิกก้า&น้องโรร่า มาแล้ว!! [cc] แดนแพทตี้ SS2 | EP.48 |](http://i.ytimg.com/vi/UmlpJhRekyY/mqdefault.jpg)
LOVE the look the radial, 3 bladed prop and spinner give it. Stunning.
Thanks
good efforts and work friend
Thank you
A very nice aeroplane with a lovely engine installed! Happy flying.
Many thanks!
Absolutely beautiful plane love what you've done with this build
Thank you
beautiful plane and that engine sounds fantastic, wow, nice hand start!
Thanks. This engine will start easily with one or two flip
Fantastic plane. Excellent build.
Excellent job. Beautiful plane.
Thanks
Un très beau modèle, et il vole super bien ! bravo pour l'atterrissage !
Thanks
Beautiful plane! The Ryan Sta was a racing plane so if you want better performance try a 17x8 2 blade prop. 2 blade props are more efficient so this will give you more thrust and speed! The 17x10 3 blade is to much for this engine. The manual recommends 16x8 to 18x6 2 blade. When you add a blade you generally reduce pitch by 2. Just a friendly suggestion:-)
Thanks. I'm flying with 16x8 3 blade now. 17x10 3blade fly slow. I bought the ramoser vario prop 17inch. Can be adjustable pitch. Havent try to fly with this yet
Right rudder,,,,!nice airplane.
Thanks 👍
Very Cool!!!!
Thanks
Beautiful! Just bought the same Plane and thinking of using the same engine. How in the world did you get the Cowl to fit over the 2 exposed cylinders? Do the polished metal inserts in the cowl behind the cylinder have something to do with it?
Hi Ken, you need to cut the big square opening on both side to fit the cowling .The metal sheet its actually to cover the opening hole and i did some airbrush on it to bring some hot surface & oil effects to look more natural .without the plate to cover will look ugly on the cowling with holes for your engine cylinder
👏👏👏👏👏👏
Ok, strange choice to put a radial engine in an aircraft that had an inline engine, but it works and sounds nice. Probably cools better as well. Also it looked to me like you have too much throw dialed into your elevator - causing porpoising on landing. Great looking aircraft. Nice video.
Thanks..yes to much throw on the elevator.
Gorgious looking plane. What is the wingspan?
I have a Saito FG33 R3 and looking for a plane to put it in.
hi slagarda, its 92.52" wingspan
🤟👍🙏
Thanks
Hi... Thanks for the video of this awesome model. I was wondering if you have had any problems with this engine mounted in this way ??? I'm looking to put one of these in an ESM FW-190 and mounting the engine the same way as you did, to use the scale exhaust troughs for cylinder cooling. Also, sorry if I missed the details, but what exhaust are you using? Kindest regards, Rob.
Hi thanks. I have no issue flying the engine mounted like this .im using the stock exhaust (flexible pipe)extended with aluminium tube/pipe to bring it out from cowling.but your esm fw-190 is with round cowling which i think no issue mounting it in any direction
@@vicyboy12 Hi, thanks for that, very much appreciated.
@@vicyboy12 Hi again, sorry... Is there any way I might see any photos of your engine and radio installation, as I want to get it right !!! Thanks again, Rob.
@@80THOMMO hi no problem. whats your email address.ill post some photo
@@vicyboy12 Hi, if you could send them to thommozero@bigpond.com. it would be greatly appreciated... Kindest regards, Rob. ( Sorry, just fixed up that email address... Looking forward to hearing from you.)
throttle right stick? what mode?
I'm on mode 1
Beautiful plane.Thanks for sharing this video..where is this airfield?
Hi it's in Malaysia
I fly mode 2
Hello.
Very nice. What is the weight of the airplane without fuel?
Thanks. Unfortunately, I didn't measure the weight
@@vicyboy12thats a shame. Did you use the CG of 100mm? Is this ok?
@DidierO the C.G was fine as per manual
Thanks
@@vicyboy12
Do you modify your engine ? How's saito FG 33 R3 in your opinion ?
Hi, no modification done. Happy with this engine so far. Very easy going engine 😀
I just finish making one electric, easier to start, more reliable, no expensive glow gas, no oil cleaning, and electricity is free (almost).
Sounds great!
Flight weight? Thank you
Hi im sorry didn't weigh it
berapa kos semua ni bos?
Arf RM1100
Spektrum A6150 servo 1 piece RM150. Pakai 8biji
Turnigy headlight RM40
Saito fg33r3 RM4300
Biele 3 blade RM130
Dave brown custom spinner RM350