Quick Groove Tool for pennies. It doesn't get any easier!
ฝัง
- เผยแพร่เมื่อ 12 ส.ค. 2023
- Hello friends! You are on the Crazy Workshop channel.
In this video, I'll show you how to make the simplest and most useful device for a router for mere pennies. To do this, you will need a couple of pieces of plywood and a few bolts and nuts.
Subscribe!
On my channel you will find many interesting and useful videos about woodworking, carpentry, furniture making, homemade fixtures and tools, homemade machines, tool reviews and much more.
🏆Furniture projects • Креативная идея из фан...
🏆Homemade machines • Очень крутая ленточная...
🏆Workshop Tools • Гениальная идея! Мощно...
🏆 Creative Designs • Эксклюзивная идея! Неу...
🏆 For garage • Шикарная идея для гара...
🏆 Metalworking • Круче инструмента у ме...
🎯Instagram / crazy_workshop_insta
🎯Zen zen.yandex.ru/madesimple
🎯Facebook / ivancrazyworkshop - แนวปฏิบัติและการใช้ชีวิต
How do you like this idea?
It doesn't get any easier!
Nice and easy. It will be good if you can share some dimensions. TIA.
@@ashokmoghe8035 The dimensions would be quite arbitrary just so long as all sides are square and adjusting slots are placed in the centerline of the wood forming an absolute even parallel line it should work. Make to fit your project 😉
Хорошечно 😁👍🏆
To complicated. Woild love to see you do it just with a hand saw and wood chisells.!Now that would be real skill.!
Very useful jig. Just a couple of things though with regard to terminology and safety. 1) When it goes across the grain it's called a dado. If it goes along the grain it's called a groove. Also, when using the router, it's much safer to make a shallow pass with the bit 1/8" at most, set it a bit deeper, and take another, and so on. At the very end, you could use a router plane to get the depth just perfect and clean so that you have a great glue surface at the bottom. It's easy to overshoot the depth with a router bit.
A number of commentators have said he should have done multiple passes increasing the depth with each pass as should normally be done. I think he was using a flush trim bit with a top bearing as a guide. You can see the bit he was using fairly clearly at 2:32. That was, no doubt, the reason that he couldn’t do multiple cuts at increasing depths.
Simple idea but where can I get a router for pennies?
Nice. Seen something like this on PBS about 15 years back. This one is a little easier to make, I think.
Thank you for tthe idea!
Best regards. 🇧🇷
Brilliant, Ivan! Nicely done! 😊
Stay safe there with your family! 🖖😊
Great SIMPLE and quick idea !!! Thank you.
I like it! Very simple, quick, and effective.
Excellent 👏👏👍👍merci pour cette vidéo ! Amitiés.
Nice! I’d use the router in incremental passes rather than trying to remove all the material in one pass, but it seemed to work for you!
Very simple and clever, ignore the armchair experts!
Excellent ! ! ... AND ... using ( Knurled wheel ) techniques ... ( ? ) ... OMG .. ! ...... DAVE™ 🛑
It doesn't get any easier when you have a the tools and workshop like yours.
👌👌👌Bravo!!!!
I like the concept because you are fitting to the board you want the groove for. However, when you're cutting wood and the router bit is going along a wood jig, seems like it would be easy to nick the jig with the router bit. Someone in the comments pointed out that you could actually see when that already happened in your video (about 4:02). So, it seems like other strategies (e.g., making multiple passes on a table saw) are more lasting options. Or perhaps you have a strategy to keep the router bit completely away from the jig?
Good idea, but I prefer another method using a table saw.
Not everyone has a table saw, so this is the perfect and way cheaper alternative.
Agreed, that’s why I said it’s a good idea. If you do have a table saw I find it to be quicker and more precise. I had a router for many years however before having a table saw. 👍
I prefer another method using a carpenter.
🙏👍👍👍
Crazy как всегда the best!!
All that work for just a groove? Just get a dado blade set and be done with it
The Wood Whisperer has a much better one which he did a dozen years ago.
Здорово! 👍
А какая фреза используется?
Любую используйте только с верхним подшипником
Понятно.
Пересмотрел видео.
Т.е. пойдет только короткая фреза.
Если длинная, то какие-то проставки между доской и шаблоном надо будет сделать.
Благодарю за идею, и за ответ.
Успехов вам во всех начинаниях! 🤝
Можно и без тез заморочек таким инструментом зделать паз
Hpla amigos es mas complicada tu idea buena pero complicada solo pon un tope y ya pasas la fresadora asi de fasil...
use the table saw its quicker
А если глубина меньше нужна?
Глубина регулируется опусканием или подниманием фрезы. Эо ж логично и всем известно.
I don't know much about woodworking but this does not look easy or like it costs pennies. Maybe a humble brag about how a PRO sets up his jig. If you are going to use it 1,000 times in a year, then yes it is cost effective. For the rest of us, probably not.
This one will not even last that long, already has a large bit missing where the router bit has gone off course. Right in the middle, you can see it at 4:50 a nice little contour for the bearing to follow.
Я что-то не понял, как он фрезером в погружной базе использовал приспособу как направляющие и не зарезал их фрезой? С помощью копировальной втулки? Так у неё тоже есть свои габариты и тогда размер бы у него не получился.
Фреза с верхним подшипником
Диаметр фрезы в первый раз равен ширине паза, и на фрезе верхний подшипник.
@@NN-kk4vmНе обязательно диаметр фрезы равен ширине паза. А насчёт подшипника теперь понял. Спасибо.
На станке ваще бы бесплатно было
real simple (sarcasm) all you have to have is a drill press a dewalt cordless router, a few fasteners, knobs and the right router blade. How much did all that set you back? The router alone is $249 at Lowes.
not if you are fast enough.😁
you spent way too much
👏👏👏👍👍