Zdravo, narucio sam ovaj splicer sa Aliexpresa, zanima me vase misljenje o uredjaju, planiram ga koristiti iskljucivo za svoje potrebe posto sam elektricar i ponekad imam potrebu da se popravi neko opticki kabal. Hvala na odgovoru
Ma da, odlično služi. Nije idealno, malo se muči sa vlaknom koje se ne pripremi baš perfektno, ali odradi posao uz malo strpljenja. Do sada je odradila bar 50tak linkova. Zadovoljan sam. Mislim da vredi uloženo.
the machine rejects your cleaved fibre because you do not use IPA alcohol or orther cleaning fluid on your tissue. so the fibre is still dirty. you can not see it, but the machine does.
I know one does half-time proffessional work with ai9 and ai8. Good machine but cut tool that comes in kit is not good. If on job site it's better to have spare tool to prepare fibers
where are your splice sleeves? Good video either way, I was looking for how this thing performed. Fukikura a little out of my price range.
4 ปีที่แล้ว
Tnx, it was just a demonstration for my students. For practice, we are not using sleeves to reduce costs. The device is great. Not perfect as it struggles sometimes with unclean cut, but it's great for the price.
@@elektrycygrzesiak Yes, i solved it! first clean the blade with isopropyl alcohol. Then peel the cable well, remove the 3 layers of protection that it brings. Then clean the optical fiber with isopropyl alcohol and a cotton ball, and just make the cut
Zdravo, narucio sam ovaj splicer sa Aliexpresa, zanima me vase misljenje o uredjaju, planiram ga koristiti iskljucivo za svoje potrebe posto sam elektricar i ponekad imam potrebu da se popravi neko opticki kabal. Hvala na odgovoru
Ma da, odlično služi. Nije idealno, malo se muči sa vlaknom koje se ne pripremi baš perfektno, ali odradi posao uz malo strpljenja. Do sada je odradila bar 50tak linkova. Zadovoljan sam. Mislim da vredi uloženo.
You need to add a heat shrink fiber sleeve to the cable to protect the splice. Then you heat the sleeve over the splice in the end.
He did show that at the end. He demonstrated how you would do it, but did not put the piece on. It was for examples purposes.
the machine rejects your cleaved fibre because you do not use IPA alcohol or orther cleaning fluid on your tissue. so the fibre is still dirty. you can not see it, but the machine does.
Thanks for this video !
hello sir I have this kind of machine but it no longer turns on how to fix help me please I work with!!!!
OMG! You used the brush! I wondered what that was for...! haha!
I need to ask about this fusion splice are good or not after you use it
I know one does half-time proffessional work with ai9 and ai8. Good machine but cut tool that comes in kit is not good. If on job site it's better to have spare tool to prepare fibers
your cleaves are bad because you didnt strip enough coating off... you can see on your splice that you didnt strip enough off.
where are your splice sleeves? Good video either way, I was looking for how this thing performed. Fukikura a little out of my price range.
Tnx, it was just a demonstration for my students. For practice, we are not using sleeves to reduce costs. The device is great. Not perfect as it struggles sometimes with unclean cut, but it's great for the price.
I am a manufacturer of optical fiber equipment in China. I hope we can have a cooperation.
I am a manufacturer of optical fiber equipment in China. I hope we can have a cooperation.
Very nice machine doe😢
How you did adjust the fiber cleaver cutting blade? I can’t adjust to a good cut
Hey i have same problem... Do you have solve that?
@@elektrycygrzesiak
Yes, i solved it! first clean the blade with isopropyl alcohol. Then peel the cable well, remove the 3 layers of protection that it brings. Then clean the optical fiber with isopropyl alcohol and a cotton ball, and just make the cut
Price for this mishion
I am a manufacturer of optical fiber equipment in China. I hope we can have a cooperation.
920usd
Good
Splicing machibe which brand?
Single fire crap mashine .
🤨🤨😁
Le problème ça vien de toi 😂
bonjour monsieur j'ai ce genre de machine mais il ne s'allume plus comment réparer aider moi s'il vous plaît je travaille avec !!!!