Dismantling pump for Graco FinishPro II 395 Air Assisted Airless spray painting machine

แชร์
ฝัง
  • เผยแพร่เมื่อ 31 ธ.ค. 2024

ความคิดเห็น • 11

  • @maurinhorivinho6787
    @maurinhorivinho6787 2 ปีที่แล้ว

    Very helpful video. I have to say. Thanks 👍

    • @Alastair_Freebird
      @Alastair_Freebird  2 ปีที่แล้ว

      Oh good!! It’s one of my more obscure and lesser watched videos so thanks for commenting

  • @paulsharkey6576
    @paulsharkey6576 4 ปีที่แล้ว

    I just bought a 2020 490 used. It has 33 gallons run through it. The guy I bought it from never flushed and clean the sprayer with water before he stored it with mineral spirits. He just let the paint sit in it mixed with mineral spirits. LOL. That was really dumb. I got it for $400. I took it apart and clean the entire fluid section spotless. I purchased a new suction tube, a new prime/drain tube, and new filters. This unit is now spotless and basically brand new. I'm in it for $560.00. This is the new Ultra Max II with blue link and contractor II gun. It was a great deal. Can't wait to spray with it.

  • @mckjimmy3802
    @mckjimmy3802 4 ปีที่แล้ว

    Cheers mate Helped me out with my similar issues

    • @Alastair_Freebird
      @Alastair_Freebird  4 ปีที่แล้ว

      That's good to hear, thanks for taking the time to comment

  • @GeordieDonkey
    @GeordieDonkey 5 ปีที่แล้ว +3

    Just put loctite on the piston valve and torque to the spec in the instructions, you must replace all the seals

  • @BranimirArbanas
    @BranimirArbanas 2 ปีที่แล้ว

    Hi, great video. Thanks. Would you recommend somebody just starting with fitted furniture to purchase Finishpro II 395? How satisfied are you with the sprayer?

    • @Alastair_Freebird
      @Alastair_Freebird  ปีที่แล้ว

      Hi sorry for the late reply, no I wouldn't! I think we were mis-sold a little, really this is a site sprayer's tool. We bought it because we didn't already have a compressor in the workshop, but the onboard compressor is underpowered so it's hard to get the full benefits of the air-assist shaping the fan pattern. I would look at the Graco GXFF for a cheaper/better value starting machine. Or for up to date advice ask Giles at www.ultrimaxstore.com/ we recentlt bought a Wagner Cobra from them ( a fantastic machine but very pricey too so not one to start out with)

    • @BranimirArbanas
      @BranimirArbanas ปีที่แล้ว

      @@Alastair_Freebird Thank you for your reply. In the meantime I already purchased a slightly used finishpro. Will try it in a few days. Hope it works for me. But thank you for the advice. I really appreciate it.

    • @Alastair_Freebird
      @Alastair_Freebird  ปีที่แล้ว

      Well it’s ok, we got on with it well enough for a few years and it was a huge step up from our previous painting arrangements. There are so many factors to getting a good sprayer finish, and the environment is one of the biggest ones. What kind of booth and extraction do you have?

  • @lmgp1941
    @lmgp1941 2 ปีที่แล้ว

    Graco 490 pr pro suction