Great video and useful to see the frequency sweep.Does it treat the left and right separately? I want to make left and right channel VU meters and this looked promising so I searched and found your video.
@@japkiratsingh930 Thanks for the reply Japkirat, I will give it a try ! The SP107E does seem to react a little too much to the mid/upper mid range and not enough to the low end. I might make a little simple switch that switches between this bass version and the normal version, just bypassing the resistors and capacitor.
@@japkiratsingh930 Agreed, it seems to work well . . . . I just ordered a 1uF 50V capacitor from eBay . . . and I ordered some 33k resistors, but I wasn't sure which kind I should get, 0.25W ? 0.5W ? 1W ? 2W ? (etc) . . . I guess that's the amount of watts they can get rid of through heat before they burn out ? Anyhow I went with 0.5W, I guess if that burns out I just need to order a higher value resistor ?
This is great. Could you help me with the following projects? I work with learning disabled and other special needs children. 1) I would like to create a 6’ tall by 5” diameter column which would be used to train children to speak, pronounce words and sounds, etc. The column would essentially react like a spectrum analyzer, with rings of LEDs rising to the top of the column, then falling back down. 2) In a similar fashion, I would like to build a 6’ X 6’ wall mounted multi-band LED Spectrum Analyzer I have been told that these devices would require something called AGC (automatic gain control) so that the rising lights would automatically deliver their full performance as the microphone hears sounds from whispers to loud voices or singing. Can I accomplish this with the SP107E music controller? Would I need to use more than one SP107E Controllers? Will I need to add the AGC feature to this Controller? Is there perhaps another type of controller capable of a) handling the greater volume of LEDs, b) supplying the required voltage c) having the AGC feature built in?
Hello PLATINUM, I have two questions: 1) Are the connections of the +5V and GND made in parallel? 2) Is it necessarily using Bluetooth or can it be connected from the Controller to the speaker? Thank you
Dear day, thank you for your video and all the devices that you show, I have a question, how and what to power this WS2812B tape, Thank you, good luck.
Hi I connected 72 in one row and 10 columns but does not work as a spectrum. I have wired it just like in your video. Can you suggest me something. All leds work but does not synchronise properly.
You must set it in the LED CHORD app. seg = 10 (if this uses 10 columns) and pixel set to 72 (if this 72 dot in one row) total = 720 leds. Check your LED installation again. All LEDs are installed in series
You can use as many as you need - it depends on various factors, for example certain controllers can only control a certain amount of LEDs, I believe this SP107E can control up to 960 LEDs . . . so it's not much use saying you want to build something that is 2' x 4' as no one knows what kind of LED strip you are using . . . . 30 LEDs/m ? 60 LEDs/m ? 144 LEDs/m ? . . . . if you are using - for example - a 60 LEDs/m LED strip then you can run about 16 meters from one controller . . . but then you will need to power all those LEDs . . . etc etc, I'd say start small, buy yourself a meter or so of 5V LED strip, a simple controller, maybe this must controller, strip an old USB lead down to the two power leads so you can power the strip from a USB port or charger . . . it's all cheap, and easy to set up.
@@PLATINUMKIT bang saya pakai 12 v.. Kok tetap nggak bisa ya.. Apa harus sesuai yg tertulis di deskripsi harus pakai 12 v.. Yg 18-45 MA.. Punya abang pakai power supply yg gimana please jawab bang
@@PLATINUMKIT jadi yg di led harus di sambung lagi power supply 12 volt gitu ya bang.. Soalnya saya beli led yg lembaran 16x16 type ws2812b.. Ini saya coba langsung pakai controler.. Led nyala tapi nggak bisa di setting sama app controler nya.. Cuma nyala aja.. Led nya
PLATINUM thx man! I‘m still in doubt.... 960 leds times 0,06A for each led means over 57A power from controller at max brightness. I don’t think the controller is capable of it without adding extra power...
@@leerzeichen1910 I've run 288 LEDs with this controller, bouncing around to music, in various colour modes, and looking at my bench power supply, it never really draws that much, surprisingly only around 3-4 amps at 5V . . . . you'd only really see 0.06A for each LED when on white (R,G and B at 100%), left on for a while (not flashing intermittently like in most patterns) and with the brightness setting set to maximum, I find the brightness at max is way to bright, it sort of blows the colours out, they all go a little washed out, a little too white, even half brightness is insanely bright, even in daylight . . . the current seems to track the APPs brightness setting really closely, a 100% strip at - say 1amp - lowered to 50% brightness will register around 0.5amp . . . . and remember individual colours like just RED or BLUE will only draw 0.02A, and when the brightness is not set to 'kill' more like ~0.01A . . . . etc etc, basically these LEDs seems to behave well, handling lots of light without any real power issues.
@@Strangeworries The SP170E can drive 960 LEDs - bear in mind each LED is really 3 LEDs (R,G,B), so in reality it is driving 2880 LEDs!! But it's better to think of each R,G,B array as 1 LED . . . . so, 960.
PLATINUM kalau untuk rangkaian bass filter di atas kabel RCA disambungkan ke speaker subwoofer ya gan.? kalau iya di volume tinggi apakah aman dan tidak kelebihan watt, karena arusnya sama dengan arus yang mengalir ke speaker subwoofer. mohon bimbingannya.
@@fa_fauzan7822 itu kan pakai kabel RCA berarti bukan di sambung ke output amplifier/ output speaker, tapi di sambung ke audio autput media player seperti mp3, cd, dvd, hp dll
PLATINUM berarti untuk lebih merapikan pengkabelan bisa sambungkan langsung ke audio in pada controller ya gan., led matrixnya pakai modul sendiri atau gabung dengan vu meter.?
Get an old USB lead . . . . cut off one end (the end that doesn't go into your computer/charger) . . . expose the 4 wires inside, snip off the GREEN and WHITE wires, you don't need these . . . then the RED (+5V) goes to the controller's +5V input, the BLACK goes to GND ('ground') . . . this gives you a 5V power supply ! : )
Ini ga bisa di slow karena memang sudah program seperti itu. dan jumpernya dari pabrik sudah ada saya belum pernah coba melepaskannya. Sy rasa ini ga berfungsi apa2
it was doing better job in my test th-cam.com/video/eD5r-VsQCOQ/w-d-xo.html but still bad, hopefully there will be a better model soon, for led strips and vu is good.
I was highly suspicious how such low cost item is having computational power to perform Fourier transform on audio signal to display proper spectrum bands on led matrix. From your frequency sweep test now I know it's a junk product as far as Spectrum analyser capability is concerned. It is just doing random kicks on a random column. Not useful.
This thing is crap. It simply converts the intensity of the Microphone / AUX input to a direct LED trigger signal. No FFT or seperate Filters involved. A cheap and wayyy better Alternative is the MSGEQ7 coupled with Arduino
hey dummy! I mean FlaserGames. Is this video a DIY tutorial on how to make a spectrum analyzer? I'm pretty certain that he debunks the manufacturer claim that this is a true spectrum analyzer and then goes into state that this is a fine innexpensive alterantive to having to program multiple boards for the simple effects of a vu meter. But wait theres more, he kicks it into a new realm by adding a bass filter. So as the author doesnt deserve this BS negative Know it All vibe in his comment section. Im going to state that you are absolutley right in your statement, but your statement does not beliong in this forum and by posting it, disrespected Platinum and everyine that reads these and enjoys the content. So I'm going to apolgize for you because maybe you were thinking you were on another page. He's sorry everyone that he is a female cleansing product.
Perfect explanation without a word being spoken. Thank you for clearing many doubts!
Your videos are super helpful in my projects, I was wondering if we could get a more detailed diagram of your bass filter that you used. Thanks!
I just bought the SP107E Music Controller... thanks for the video
Perfect for those, who cant set up a ESP with aircookie. thank you.
@Markus W. Schau dir mal noch an, was man mit E1.31 und Jinx! damit machen kann.
This my kinda stuff. Unique content. Subbed.
Nice video.. oh my lord ko g ada notifnya ya klo ada video baru.. ilmu baru.. kereen om.. mantap 👍
Great video and useful to see the frequency sweep.Does it treat the left and right separately? I want to make left and right channel VU meters and this looked promising so I searched and found your video.
Thanks for the bass filter it works great.Keep up the good work!
What does it do ? It wasn't quite clear (for me at least) from the video, does it make the controller react more to the bass ?
Dave Lordy It makes so light only come up on bass not on treble or mid
@@japkiratsingh930 Thanks for the reply Japkirat, I will give it a try ! The SP107E does seem to react a little too much to the mid/upper mid range and not enough to the low end. I might make a little simple switch that switches between this bass version and the normal version, just bypassing the resistors and capacitor.
Dave Lordy yea just compare before and after filter in this video itself.
@@japkiratsingh930 Agreed, it seems to work well . . . . I just ordered a 1uF 50V capacitor from eBay . . . and I ordered some 33k resistors, but I wasn't sure which kind I should get, 0.25W ? 0.5W ? 1W ? 2W ? (etc) . . . I guess that's the amount of watts they can get rid of through heat before they burn out ? Anyhow I went with 0.5W, I guess if that burns out I just need to order a higher value resistor ?
Very helpful ,. Is there any chance to modify for using Audio spectrum analyser? Sir
This is great. Could you help me with the following projects?
I work with learning disabled and other special needs children.
1) I would like to create a 6’ tall by 5” diameter column which would be used to train children to speak, pronounce words and sounds, etc. The column would essentially react like a spectrum analyzer, with rings of LEDs rising to the top of the column, then falling back down.
2) In a similar fashion, I would like to build a 6’ X 6’ wall mounted multi-band LED Spectrum Analyzer
I have been told that these devices would require something called AGC (automatic gain control) so that the rising lights would automatically deliver their full performance as the microphone hears sounds from whispers to loud voices or singing.
Can I accomplish this with the SP107E music controller?
Would I need to use more than one SP107E Controllers?
Will I need to add the AGC feature to this Controller?
Is there perhaps another type of controller capable of a) handling the greater volume of LEDs, b) supplying the required voltage c) having the AGC feature built in?
Kool, love your channel.
Awsome bro.super.loved it
W kira ini chanel luar.
Kren bnget bro.
Please make video about fire led which was in your infinity speaker
Hello PLATINUM, I have two questions:
1) Are the connections of the +5V and GND made in parallel?
2) Is it necessarily using Bluetooth or can it be connected from the Controller to the speaker? Thank you
yes in parallel. you can use bluetooth or audio cable with a 3.5mm plug
Dear day, thank you for your video and all the devices that you show, I have a question, how and what to power this WS2812B tape, Thank you, good luck.
5v power suppies. Smps for pc is best but you can buy dedicated 5v power supply for led strips
Really amazing . SP 107e LED board work video plz show
Hi I connected 72 in one row and 10 columns but does not work as a spectrum.
I have wired it just like in your video.
Can you suggest me something.
All leds work but does not synchronise properly.
You must set it in the LED CHORD app. seg = 10 (if this uses 10 columns) and pixel set to 72 (if this 72 dot in one row) total = 720 leds. Check your LED installation again. All LEDs are installed in series
Does the light here also follow the sound volume ? Meaning if the sound is low then it has low brightness and if higher volume, more bright ?
what about the red and black cable on the led strip? i use ws2812b
Red (+5v) and black (-) or gnd
Nice, 👍👍👍👍
Terimakasih sudah berbagi 👍👍👍👍
very nice sir., by the way where can i buy your kits especially the yiroshi bass amplifier? i love your videos.
😁👍contact seller. Check in the description
where should i connect the rca bass filter?
can i install this in my car?
Olá. Aos 1:23 você adiciona um fio na placa do 107E. Como deve ser soldado esse fio? Em qual componente ou trilha deve se fazer a solda?
Obrigado.
Do you mean the black wire? if yes, this is already from the factory
@@PLATINUMKIT sorry, I wrote in portuguese. But is about the Black wire.
I Understood. thanks for answering.
I like só much your vídeos.
Soo beautiful
Cool 👍🥇💯
What is the real difference between VU meters and Spectrum Analyzer?
volume vs frequency.
Fungsi colokan Jack audio buat apa kak
Question how many led strips can you use I want to build one 2’x4’
You can use as many as you need - it depends on various factors, for example certain controllers can only control a certain amount of LEDs, I believe this SP107E can control up to 960 LEDs . . . so it's not much use saying you want to build something that is 2' x 4' as no one knows what kind of LED strip you are using . . . . 30 LEDs/m ? 60 LEDs/m ? 144 LEDs/m ? . . . . if you are using - for example - a 60 LEDs/m LED strip then you can run about 16 meters from one controller . . . but then you will need to power all those LEDs . . . etc etc, I'd say start small, buy yourself a meter or so of 5V LED strip, a simple controller, maybe this must controller, strip an old USB lead down to the two power leads so you can power the strip from a USB port or charger . . . it's all cheap, and easy to set up.
buen dia donde compras el controlador de luces
itu bass filter konek ke speakernya gimana om
Hi can I double the number of columns and a few rows.
yes you can 😀
Gracias por tu video, funciona con SM16703?
sorry i have never tried it😀
This SP107e controls the LPD6803 Strips?
ws2812
@@PLATINUMKIT Thank you!
I have one doubt -12 volt rgb led strip in this controller will work
Yes..12v can work with this controller
@@PLATINUMKIT bang saya pakai 12 v.. Kok tetap nggak bisa ya.. Apa harus sesuai yg tertulis di deskripsi harus pakai 12 v.. Yg 18-45 MA.. Punya abang pakai power supply yg gimana please jawab bang
@@wahyu854 mungkin ada yg salah. Untuk controller jika pakai 12v lednya juga harus yg 12v
@@PLATINUMKIT jadi yg di led harus di sambung lagi power supply 12 volt gitu ya bang.. Soalnya saya beli led yg lembaran 16x16 type ws2812b.. Ini saya coba langsung pakai controler.. Led nyala tapi nggak bisa di setting sama app controler nya.. Cuma nyala aja.. Led nya
how many leds ws2812b can support this controller? or what's the maximum amperage draw of this controller?
960 leds
PLATINUM thx man! I‘m still in doubt.... 960 leds times 0,06A for each led means over 57A power from controller at max brightness. I don’t think the controller is capable of it without adding extra power...
if the maximum brightness of the LED will not be able to last long. if lowering the brightness of 20A is enough
@@leerzeichen1910 I've run 288 LEDs with this controller, bouncing around to music, in various colour modes, and looking at my bench power supply, it never really draws that much, surprisingly only around 3-4 amps at 5V . . . . you'd only really see 0.06A for each LED when on white (R,G and B at 100%), left on for a while (not flashing intermittently like in most patterns) and with the brightness setting set to maximum, I find the brightness at max is way to bright, it sort of blows the colours out, they all go a little washed out, a little too white, even half brightness is insanely bright, even in daylight . . . the current seems to track the APPs brightness setting really closely, a 100% strip at - say 1amp - lowered to 50% brightness will register around 0.5amp . . . . and remember individual colours like just RED or BLUE will only draw 0.02A, and when the brightness is not set to 'kill' more like ~0.01A . . . . etc etc, basically these LEDs seems to behave well, handling lots of light without any real power issues.
what did you do to make this red top LED go down slower ?
Cannot adjust the led movement. This is automatic from the controller😀
@@PLATINUMKIT
why red led above and slower
I'm using same central more like
always fast little
I don't know maybe this is from the controller
Probably because he has a longer led strip or more LEDs per meter
What if 2x ws2812b 144 led/pixels what kind of resistor and how many voltz you need? I love this project
use 2 resistors 470 ohm and keep 5v
What is that 1uf 50v?
1uf 50v for bass filter
Make a video how to connect multiple ws2812 please
Make a video about nodeMCU esp8266 7 band spectrum analyzer?
Hello brother can we make same working controller with Arduino...it is possible or how can you make a tutorial for it
Tutorial see in this video
th-cam.com/video/3aPEeiJjQXs/w-d-xo.html
th-cam.com/video/Yuq-sp9752g/w-d-xo.html
Thank you brother
Is it possible to install 4 segments in a round shape?
yes you can do it😃
@@PLATINUMKIT I don't understand how to make the settings, please make a video
What power supply are you using? Can this be wired via USB?
i use adapter 5v 7A. cant use usb
Thanks for sharing..
Too bad it doesn't work properly as a spectrum analyser. Nice VU patterns though.
Well done
Это круть!!
Ты хоть понял о чём видео? Круть 😂
Hey,
How do I do the spectrum analyser?
Grear vid
How do you power this?
Whats the max number of leds it can drive?
Max 20 leds/bands
@@PLATINUMKIT So how many idivitual leds?
@@Strangeworries The SP170E can drive 960 LEDs - bear in mind each LED is really 3 LEDs (R,G,B), so in reality it is driving 2880 LEDs!! But it's better to think of each R,G,B array as 1 LED . . . . so, 960.
What power supply do you use
adapter 5v 5A
You could also just get an old USB lead, cut off one end to expose the 4 wires, the RED and Black wires are the power, RED is +5V and Black is GROUND.
Pada rangkaian tersebut audio in disambungkan dari HP atau disambungkan dari speaker subwoofer.?
dari hp atau audio output
PLATINUM kalau untuk rangkaian bass filter di atas kabel RCA disambungkan ke speaker subwoofer ya gan.?
kalau iya di volume tinggi apakah aman dan tidak kelebihan watt, karena arusnya sama dengan arus yang mengalir ke speaker subwoofer.
mohon bimbingannya.
@@fa_fauzan7822 itu kan pakai kabel RCA berarti bukan di sambung ke output amplifier/ output speaker, tapi di sambung ke audio autput media player seperti mp3, cd, dvd, hp dll
PLATINUM berarti untuk lebih merapikan pengkabelan bisa sambungkan langsung ke audio in pada controller ya gan.,
led matrixnya pakai modul sendiri atau gabung dengan vu meter.?
@@fa_fauzan7822 iya sambung ke controller.
Sp107 controller bisa untuk led matrix dan vu meter
Do you sell the VU strip?
can buy on Aliexpress.com
👍👍👍👍👍
Do you have schematic diagram
Kerenn ...👍👍👍
Maximum pixel support..?
960 pixel
Bang led strip pake tipe apa kalo boleh tau...
Tipe ws2812
@@PLATINUMKIT oc makasih bang...
А на заказ делаете ???!!!
How to add bass filter?
if u watch the whole video u wouldn't ask those stupid question
Itu led stripnya dibikin pararel apa seri mas....penasaran aku cara sambungnya gimana...mohon pencerahan
Pasangnya di seri tinggal di sambung kabel, seperti sebelum dipotong per 20led.
@@PLATINUMKIT yg video di menit ke 02:00 itu rangkaiannya dibikin seri per 20led ....
@@PLATINUMKIT okay2 paham aku....dia diatur di alatnya ya....sip sip.....ntar order lamgsung ke tokonya..platinum kan namanya di tokopedia
Trus yg lingkar speakernya ikut mana...itu pakai 1controler aja ya mas?
can it work with ws2812B ???
yes it can
Ws2812B Can suitable with vu meter?
yes this is for led steip ws2812 or ws2812B
WS2812B works fine, although in the APP you have to select WS2811 . . . seems to work fine.
Kenpa punya saya ga nyala bang ada saran ga
Gimna carany mas buat lmpu mitrix sya buat ngk bsa hidup .minta vediokn cra buat lmpu mitrix mas
Sya mau tnya mas. Pakai power supplyny berpa vol mas controllerny.....
5V
@@PLATINUMKIT oooo klao pakai cas hp sama mas...
Bisa juga. Tapi ga bisa banyak lampunya
@@PLATINUMKIT pkai pwer supply seprti apa mas klau 5v mas ..
Adaptor 5v 2a-5a atau power supply 5v 2a-5a
Nice
Sp107e saya gk kebaca di app led chord.. Apa harus tipe android/blutooth tertentu ya?
Iya hpnya harus tipe android atau ios untuk androud bluetooth dan lokasi di hpnya harus di hidupkan
@@PLATINUMKIT ini pake android bluetooth & loc aktif.. Cuma tetep gk ke detect... Apa gk support bluetooth 5.0 ya?
Mungkin versi androidnya ga support. Kemarin kita coba memang ada sebagian hp android yg tipe lama ga bisa connect tapi sy lihat versinya
@@PLATINUMKIT pke hape lain baru bisa min... Ws2812 smd5050 di aplikasi pke tipe yg mana y min?
pilih ws2811
Bisa buat rgb 5050 gak bang
Красиво
bos nama lagu yang dipake buat testingnya apa??
Wado...saya lupa😁
What's the power supply you use? There's a lot of options on AliExpress
Get an old USB lead . . . . cut off one end (the end that doesn't go into your computer/charger) . . . expose the 4 wires inside, snip off the GREEN and WHITE wires, you don't need these . . . then the RED (+5V) goes to the controller's +5V input, the BLACK goes to GND ('ground') . . . this gives you a 5V power supply ! : )
Skema Bass Filternya kurang jelas. Kalo tanpa R dan L apakah bisa ?
Maksudnya gimana tanpa R &L?
Untuk Audio In, Kiri dan Kanan. Kalo cuma pake 1 Audio In, apakah berpengaruh ?
Tidak berpengaruh. Pakai 1 audio sudah bisa
Bang kalau led nya panjang 7 meter. Bisa d buat gni ga?
bisa. 10cm aja udah bisa kog
@@PLATINUMKIT makasi bg..
Om.. Saya punya SP107, kalau saya pakai kabel audio splitter nya kualitas audio nya jadi gak bagus, apa memang begitu ya?
Iya itu dari kontrollernya. Sebaiknya audio dari output player kasih resister dulu 10k-47k sebelum masuk ke kontroller.
@@PLATINUMKIT positif sama negatif nya dua2 nya di kasih resistor ya om? Maaf banyak nanya ni om.. Masih belajar elektronika.. Hehee
Yg dimaksud positif dan negatif yg mana?
@@PLATINUMKIT maksud saya kabel audio output yang dari player nya om
Oh...itu R dan L kabel merah dan putih di kasih resistor. Gnd nya ga usah kasih resistor
Biar lednya slow saat pakai music gimana caranya, dan sy liat ada kabel jumperan di IC fungsinya apa, mohon pencerahannya?
Ini ga bisa di slow karena memang sudah program seperti itu. dan jumpernya dari pabrik sudah ada saya belum pernah coba melepaskannya. Sy rasa ini ga berfungsi apa2
@@PLATINUMKIT maaf, untuk yg elki dan resistor di aux nya gimana, soalnya sy coba mengikuti malah auxnya jd g berfunsi, skrg klu di colokin malah eror
mungkin ada yg salah. coba di cek kembali
list track lagunya apa bang.?
yg ini judul lagunya ada di deskripsi
Bos, kalau pakek led strip 5050 apa bisa??
Tipe lednya harus WS2812 5V smd5050
Music??
Don_t_Hate_Me BY jingle punks
Eu quero um desses
Ini harus slalu konek ke hp ?
Tidak perlu..setting akan tersimpan otomatis
@@PLATINUMKIT biar mendukung frequency gimana 😄
tidak bisa dari controllernya
Harga berapa modulnya
Harganya bisa cek di deskripsi
Wih rockford fosgate
Setting di hp pakai Aplikasi ya???
Ya pakai app led chord
bang misal mau dipasang di mobil bisa bang?
Bisa lednya pakai yg 12v atau pakai pakai step down untuk menurunkan tegangan dari 12v
Olá amigo vc poderia mim passa projeto
Apa Judul musik pertamanya?
Don_t_Hate_Me BY jingle punks
it was doing better job in my test th-cam.com/video/eD5r-VsQCOQ/w-d-xo.html but still bad, hopefully there will be a better model soon, for led strips and vu is good.
Yeah just as I thought... The SP107e is fake.... Glad I didn't buy it.
wym?
@@kevinmccorsley7570 Because it's not a spectrum analyzer.... Reacting in frequency... Not just random flicks
I was highly suspicious how such low cost item is having computational power to perform Fourier transform on audio signal to display proper spectrum bands on led matrix. From your frequency sweep test now I know it's a junk product as far as Spectrum analyser capability is concerned. It is just doing random kicks on a random column. Not useful.
Om ada nomer wa
Ada dideskripsi
Aux in nya tidak berfungsi :(
bisa kog
Emang gitu ya, harus besarin volume nya dulu baru berfungsi ?
ya
This thing is crap. It simply converts the intensity of the Microphone / AUX input to a direct LED trigger signal. No FFT or seperate Filters involved. A cheap and wayyy better Alternative is the MSGEQ7 coupled with Arduino
hey dummy! I mean FlaserGames. Is this video a DIY tutorial on how to make a spectrum analyzer? I'm pretty certain that he debunks the manufacturer claim that this is a true spectrum analyzer and then goes into state that this is a fine innexpensive alterantive to having to program multiple boards for the simple effects of a vu meter. But wait theres more, he kicks it into a new realm by adding a bass filter. So as the author doesnt deserve this BS negative Know it All vibe in his comment section. Im going to state that you are absolutley right in your statement, but your statement does not beliong in this forum and by posting it, disrespected Platinum and everyine that reads these and enjoys the content. So I'm going to apolgize for you because maybe you were thinking you were on another page. He's sorry everyone that he is a female cleansing product.
You need to talk to tell me what you are doing
Just buy some shit at ali. Ok.
So beautiful