@@AutoVisionDesign bro i am asking abt in this video without changing the tooling line...u change class A surface to achieve correct draft analysis....why u are not change the tooling line angle...
Tooling changes request from supplier 01. Parting line issue / Draft feasibility 02. Critical area or complecation for slider lifter movement 03. Basic Design rule if not followed like Draft / shutoff angle / fillet / sink issue / part THK
Thank you for sharing the great information
Glad it was helpful!
In Tool Test we need to consider 3° draft for A surface of 0.5° draft ?
YES,
3 deg for Class A and
0.5 Deg for B side
Hello bro ...i have to clarify with you..when we go for class surface change instead tooling direction and vice versa...how to choose...
Start with
01. Assemble direction as tooling line
02. Maximum class a surface to be cleared in 3deg. in any direction that will be TL
@@AutoVisionDesign bro i am asking abt in this video without changing the tooling line...u change class A surface to achieve correct draft analysis....why u are not change the tooling line angle...
Pl check video from 7.00min onward
Still you have any question will check sepratly please mail on autovisionds2022@gmail.com
@@AutoVisionDesign okay bro
when we start the project we will have surrounding parts mastersections and Styles right along with our part ?
01. Surrounding part - yes
02. Style - yes
03. Part we need to develop
what are the changes that undergoes in tooling or the part as part goes through variouus design phases from concept to proto to production ?
Tooling changes request from supplier
01. Parting line issue / Draft feasibility
02. Critical area or complecation for slider lifter movement
03. Basic Design rule if not followed like
Draft / shutoff angle / fillet / sink issue / part THK