Good job. I've never had a patch fall off a side wall. But I do agree it didn't need one in that situation. But I did get trained by a bandag retread facility. I watched what they do. So my repairs are top notch. There are Bias and radial patches... I'm sure you know. There is blue special glue and rubber cement. I use tire talc on repair patches to help with friction.
Hey brother I'm an old tire buster from way back and I'd never tell a man his business so it's just a suggestion. How bout investing in a Tommy Gate for your truck. It'll save a little on your body and you won't have to put up with a lazy skiddy operator
I changed my own tire on my motorcycle for the first time and scratched up the pain on the rims sealing surface. It has been holding air for a while. You think it’d cause an issue in the future?
You need a truck with a lift gate and orange emergency lights I did what your doing 12 years when I was young at 42 I'm broken down glad I got out when I did😂 btw a sidewall boot repair make it last
1 trip, strip and patch and that tyre would not have separated and you would not have gone back for a 2nd trip.. excellent example of why not to plug, but hey, you will carry on
Nothin to do with the plug, the nail in the shoulder separated the casing and tread and when I took the nail out the air was able to pass through and make the bulge, but by your tone you must have known that
@@TheTireDoctor if you where aware of that then it makes this practice even worse. There could have been and internal separation storing pressure which could have released when you pushed the needle in. Plugs should be performed on a deflated tyre, plugs are designed to be a temporary measure, generally to get a tyre to hold enough air to move the machine to safe place to perform a permanent internal repair. It is a very controversial topic but people only take note once its to late. I
@TheTireDoctor 🤣 I have no idea at all.. I dont have 28 years of experience in the industry, work for a tyre manufacturer, or involved in OTR Tire design / engineering of any tyres, nor do I spend any time out in the field reviewing products.. you are absolutely correct
Check out my Socials and Buy Equipment I Use Here! linktr.ee/TheTireDoctor
“The audio didnt work so Ill do it for you - psssss” 😂😂 im dead dr ❤️
Sasssssssdssss pfrrtt 😂🤣😂🤣
You are a great tire tech even better man!
Love seeing your content! You show the real world aspect of hard work but make it fun as well
Just looking at tires, you wouldn’t expect them to be half as heavy as they are.
I like this better than shorts. Can hear all the sound effects and explanations
I like the vlogs they are fun to watch! Keep it up!
Good job. I've never had a patch fall off a side wall. But I do agree it didn't need one in that situation. But I did get trained by a bandag retread facility. I watched what they do. So my repairs are top notch. There are Bias and radial patches... I'm sure you know. There is blue special glue and rubber cement. I use tire talc on repair patches to help with friction.
Love the vlogs Tire Doctor
Good work tire doctor 👍
Your joke at the beginning made me laugh no hard I snorted multiple times.
You’re voiceover for when your audio cut out was spot on 👌 😂
So great. Keep it up.
Loving your vlogs
Your hilarious
Safety first. LOVE THAT!
Us tyre fitters are a different breed
>if you get a valve stem extension for a motorhome you can use it as a fishing tool for your tube and airup the tube as well it works great
You are keeping it real.
Is that your personal vehicle or is it just for work?
Both
It's the whole package!
@@TheTireDoctor nice
Your personal vehicle is always your business vehicle tax write off
So glad I found this channel.
Me too.
Hey brother I'm an old tire buster from way back and I'd never tell a man his business so it's just a suggestion. How bout investing in a Tommy Gate for your truck. It'll save a little on your body and you won't have to put up with a lazy skiddy operator
I changed my own tire on my motorcycle for the first time and scratched up the pain on the rims sealing surface. It has been holding air for a while. You think it’d cause an issue in the future?
i love your vids you are very funny
what kind of compressor do you run?
You need a truck with a lift gate and orange emergency lights I did what your doing 12 years when I was young at 42 I'm broken down glad I got out when I did😂 btw a sidewall boot repair make it last
Why would the patch fall off? 😂
Rachet strap?
👍
Hi bro irealy need any cominute college to be tirman in Texas please bro
Where abouts in Ontario are you guys located? I used to run a service truck at Kal tire just outside Ottawa for Cavanaugh so I'm genuinely curious lol
Toronto Area
@@TheTireDoctor not bad lots of work there lol
1 trip, strip and patch and that tyre would not have separated and you would not have gone back for a 2nd trip.. excellent example of why not to plug, but hey, you will carry on
Nothin to do with the plug, the nail in the shoulder separated the casing and tread and when I took the nail out the air was able to pass through and make the bulge, but by your tone you must have known that
@@TheTireDoctor if you where aware of that then it makes this practice even worse. There could have been and internal separation storing pressure which could have released when you pushed the needle in.
Plugs should be performed on a deflated tyre, plugs are designed to be a temporary measure, generally to get a tyre to hold enough air to move the machine to safe place to perform a permanent internal repair.
It is a very controversial topic but people only take note once its to late.
I
@@jds7438 you sound like a mechanic that doesn’t deal with tires on a daily basis but once a week
@@jds7438 or someone who’s never done field work and thinks the books you
have read are law 🤷🏼♂️
@TheTireDoctor 🤣 I have no idea at all.. I dont have 28 years of experience in the industry, work for a tyre manufacturer, or involved in OTR Tire design / engineering of any tyres, nor do I spend any time out in the field reviewing products.. you are absolutely correct
$100.00 an hour for wait time
07:50 can't they put it inside?
It was at a school parking lot, not many calls I go on can be done inside 🤙🏻
I want to work with you
رمز "تم التحقق منها بواسطة المنتدى"
Dude
That forklift driver needs help
You have to start eating ballonie sandwiches
Bro how do you know… that’s literally the only sandwich I take to lunch 😂
You probably make as much from your TH-cam as you do fixing tires. Way to double up your income bruh! 😉