I have E1 error code, checked with 10k resistor, and bought a new thermistor, but it was not the problem: 240kOhm @ room temperature is ok. The problem is at integrated circuit in main PCB. Analog input AI3 (P63) should be high impedance (it is also tristate digital I/O), but it was latched at Vdd=5V. Solution A: replace main PCB (150€). Solution B: desolder pin 51 (it seems to work, I do not know how reliable). Solution C: replace thermistor with 10kOhm resistor or even thermistor (but then temperature readings will be wrong, i.e. insecure operation, discouraged the use of convection, only microvawe). Look for C139ST service manual, very useful for me.
Yes Mr Mike, For ruling out sensor causing E1, cavity sensor can be by passed by dis connecting the sensor and connecting 10k across the sensor connector.
Hello, sir I have the same SE error in my Samsung oven as shown above can u send me a link where can I get this membrane and keypad and my ribbon is broken
@@marcelobaclig735 i'm really sorry, i live in India, Here its available in Electronic spare market, i don't know where its available in Philippines, You can try in Electronic spare shops.
Good tiching karte hai 👍👌👍👍👌👌👍
I have E1 error code, checked with 10k resistor, and bought a new thermistor, but it was not the problem: 240kOhm @ room temperature is ok. The problem is at integrated circuit in main PCB. Analog input AI3 (P63) should be high impedance (it is also tristate digital I/O), but it was latched at Vdd=5V. Solution A: replace main PCB (150€). Solution B: desolder pin 51 (it seems to work, I do not know how reliable). Solution C: replace thermistor with 10kOhm resistor or even thermistor (but then temperature readings will be wrong, i.e. insecure operation, discouraged the use of convection, only microvawe). Look for C139ST service manual, very useful for me.
Thank you sir
🅰️🅱️🕉️🕉️GOOD TEACHING FOR YOUR CHANNEL🚦THANK YOU SO MUCH VERY VERY GOOD 👌
Super
did you say 10K resistor you can bypass for the E1 code? hard to catch it. thanks
Yes Mr Mike, For ruling out sensor causing E1, cavity sensor can be by passed by dis connecting the sensor and connecting 10k across the sensor connector.
Hello, sir I have the same SE error in my Samsung oven as shown above can u send me a link where can I get this membrane and keypad and my ribbon is broken
Whole membrane available electronic spare market
where can I get this key pad in mumbai
i can guide you in Bangalore and Chennai, Try in Electronic spare shops
Thanks..Where can i buy membrane switch or display panel for Samsung microwave oven or display panel Part#DE92-02526X
Samsung microwave Model ME731K
Where do you stay
Technoo Lab my location is Gonzaga, Cagayan, Philippines sir
@@marcelobaclig735 i'm really sorry, i live in India, Here its available in Electronic spare market, i don't know where its available in Philippines, You can try in Electronic spare shops.
hello sir
my microwave also same as Samsung and same problem 5E / SE plzz Help me
control panel problem as explained or the connector, change feather touch membrane
Anybody can purchase key membrane from Mumbai in India..
I just smacked it really hard it it fixed it
The microwave part works only for 10 seconds and the stops working with an E5 error.
Have you replaced the membrane (touch pad)
Sir can you help me to fix the key pad points because already key pad is altered by micro switch by some one now some wires are disconnected by rats
Membrane available online, Please check the link below
www.amazon.in/Able-Microwave-Membrane-Keypad-Model/dp/B01MQUL93M
Ok sir thanks for your kind information
Sir 550/ available but socket is not there how to connect the strip
वगेर मेमरान वदले se. इरर कैसे निकाल सकते है
Can I speak to you.
C103fl cantrol penal no work
Problem can be due to short of any switch ,Check key pad voltage, Try replacing whole membrane( Control Panel)
tx i/p vtg
Sir plz send this touch ped diagram I need plz help
Instead re wiring, you can replace the whole membrane, available @ www.amazon.in/dp/B07WPLWY92/ref=cm_sw_em_r_mt_dp_ZNX7WNNRFFTWEW6BG9BZ
@@technoolab3514 sir ji pahle touch work nhi kar rha tha to mene switching kiya ab 5E aa rha
Switch ke saath connect the key pad also, 5E error will go , There is inter connection between the connectors through the membrane.
@@technoolab3514 thik ho gya Sir ji ek switch direct ho gya tha
Sir Hindi translation
Please sir