Please don't turn away from BMWs! We need you! I followed your detailed instructions and I successfully programmed my Garage Door opener. I also coded my lid to soft close.. Thanks for these wonderful videos.. BMW should pay you for your content..
You are the man! Just used your video to hardwire my Escort Redline 360c and M2 dash camera into my 2019 BMW X3 M40i. The mirror plastic covering is different, but the wiring harness had the exact same pin out. Radar detector and dash camera powered on immediately. Thank you! 👍🏻👍🏻
I wish you showed a close up of where the tap wires come out. I figured the mirror assembly is nearly airtight so theres no room for the wires to stick out
@@eddiemcars Im gonna attempt this in a day or two. wish me luck. I hope I dont damage the plastic mirror assembly... does it really just pop out easily if you use a trim tool to apply horizontal force directly to the center seam?
I am having a hell of a time just getting the damn pins to make contact. Im definitely putting them in the right slots, but when I try with the actual USB converter prongs its just somehow not making contact... i wish there was some kind of 'metal glue' I could coat it with so Im guaranteed contact.
NM, I got it working today. The USB adapter I got had prongs but they were too short so they couldnt make contact and kept falling out. I jimmy rigged some needles onto the leads and got a good contact and everything worked as expected
If you can’t squeeze the tab and pull I would try to use needle nose pliers. GENTLY squeeze and pull slightly. It can fracture so please be careful if you have to use this method.
Off topic a bit but I am considering a pair of Garmin Mini 2 cams for my "new to me" 2018 X5 to use as front and rear cams. I am curious as to what you used for the wiring and adapting in order to use the mirror power? Great videos! Totally enjoyed your detailed videos of the X5 in deciding which one to purchase! :)
@@eddiemcars Awesome! Thanks man. I've been watching you videos for awhile now and I bought a 2018 X5 50i. My build is going to be custom CAI, Stage 2 pure turbos, Catless down pipes to full 3in exhaust with a X pipe and (2) 3in racing mufflers to quad 3.5in tips, and a custom tune. not looking to get crazy numbers I just want 600-650HP. and I Subscribed to your channel.
Quick question. One of my led angel eyes is not working correctly, it's dimmed. I replaced it and that didn't change the outcome. Have you ever experienced that? If so, what did you do to correct that issue? Do I need to code it? Is it just plug and play? I replaced it with OEM. At one point the DRL aspect just stop working.. After a long drive to Virginia Beach, VA. I don't know what else to do.. I did get a low voltage code. That's when I reset the module and then initialize the "Taught-in" process is IST A +.
If you replaced it and it still not working I would definitely look into Bimmercode Body domain controller module and take a look. Try to bring the brightness up when parking/headlights are on. Please report back
@@eddiemcars Hi Edward! Thanks for your response. I tried coding it to 90% just to see if it would make any difference. The other rings got brighter, while that inner ring remain dimmed. At this point, I starting to suspect the actual Headlight control module (P.#63 11 7 409 625) . Because I'm also noticing that my TMS stop working too. And I think that module also controls the TMS too. It is so weird. Because it's just that inner angel eye that's dimmed. Let me know if there is anything else that I can try.. I didn't find anything on the forums either.. Not even a write on how to replace it. I had to figure it out on my own. The one I replaced had water residue on the circuit board.
Nice video, helpful but my question is how long do u have to wait for power to cut off? I waited couple minutes and it was still on after I locked the car
Not the factory suction cup but I bought these 3rd party suction cups with 3 cups. It works better, no vibration. I like the blend Mount but I also mount my detector high up on the windshield for better range.
@@eddiemcars I like the idea of it up high also. I think I will try your solution from amazon then move to blend mount. I am happy to be in the F15 family tomorrow :) Could be the best first mod.
It won’t right away. My turns off when the car goes to sleep. Usually in about 10 minutes. Soon as I you open the door or unlock the car it will turn back on.
Pro Tip! If you tap the wires into the black connector and not the pink/red connector then the larger prongs will fit without the smaller prongs.
Please don't turn away from BMWs! We need you! I followed your detailed instructions and I successfully programmed my Garage Door opener. I also coded my lid to soft close.. Thanks for these wonderful videos.. BMW should pay you for your content..
I’ll stay for a while! 😄
You are the man! Just used your video to hardwire my Escort Redline 360c and M2 dash camera into my 2019 BMW X3 M40i. The mirror plastic covering is different, but the wiring harness had the exact same pin out. Radar detector and dash camera powered on immediately. Thank you! 👍🏻👍🏻
Another great video. Your attention to detail in your videos is super helpful!
Thank you! I’m glad you enjoy the content!
Thank you Ed! Great vid, saved me a ton of time and my F85 mirror tap looks and works awesome!
I wish you showed a close up of where the tap wires come out. I figured the mirror assembly is nearly airtight so theres no room for the wires to stick out
I have them coming out through the top near the headliner. It’s not air tight but definitely room to pass the wires
@@eddiemcars Im gonna attempt this in a day or two. wish me luck. I hope I dont damage the plastic mirror assembly... does it really just pop out easily if you use a trim tool to apply horizontal force directly to the center seam?
I am having a hell of a time just getting the damn pins to make contact. Im definitely putting them in the right slots, but when I try with the actual USB converter prongs its just somehow not making contact... i wish there was some kind of 'metal glue' I could coat it with so Im guaranteed contact.
NM, I got it working today. The USB adapter I got had prongs but they were too short so they couldnt make contact and kept falling out. I jimmy rigged some needles onto the leads and got a good contact and everything worked as expected
Great video! Would like to see a how to change air filter video please.
Sure thing. I have one coming soon! Cabin filter too!
you have inspired me to tackle this project...thanks
How do u unplug the red cable?? Oh my god i am so close to completing this project but cannot get that red plug out to save my life! Lol
If you can’t squeeze the tab and pull I would try to use needle nose pliers. GENTLY squeeze and pull slightly. It can fracture so please be careful if you have to use this method.
@@eddiemcars there is some locking mechanism keeping it in place. When you say u squeezed it out how to u mean? Where did you apply pressure exactly?
Off topic a bit but I am considering a pair of Garmin Mini 2 cams for my "new to me" 2018 X5 to use as front and rear cams. I am curious as to what you used for the wiring and adapting in order to use the mirror power? Great videos! Totally enjoyed your detailed videos of the X5 in deciding which one to purchase! :)
Very interesting information mate. 👍🏽
Thanks G
Your videos are awesome. Keep up the good work.
Thank you so much for watching!
where did you get the small mirror tap adapters to the larger ones?
They came in the pack. amzn.to/3GMzZj6
@@eddiemcars Awesome! Thanks man. I've been watching you videos for awhile now and I bought a 2018 X5 50i. My build is going to be custom CAI, Stage 2 pure turbos, Catless down pipes to full 3in exhaust with a X pipe and (2) 3in racing mufflers to quad 3.5in tips, and a custom tune. not looking to get crazy numbers I just want 600-650HP. and I Subscribed to your channel.
Quick question. One of my led angel eyes is not working correctly, it's dimmed. I replaced it and that didn't change the outcome. Have you ever experienced that? If so, what did you do to correct that issue? Do I need to code it? Is it just plug and play? I replaced it with OEM. At one point the DRL aspect just stop working.. After a long drive to Virginia Beach, VA. I don't know what else to do.. I did get a low voltage code. That's when I reset the module and then initialize the "Taught-in" process is IST A +.
If you replaced it and it still not working I would definitely look into Bimmercode
Body domain controller module and take a look. Try to bring the brightness up when parking/headlights are on. Please report back
@@eddiemcars Hi Edward! Thanks for your response. I tried coding it to 90% just to see if it would make any difference. The other rings got brighter, while that inner ring remain dimmed. At this point, I starting to suspect the actual Headlight control module (P.#63 11 7 409 625) . Because I'm also noticing that my TMS stop working too. And I think that module also controls the TMS too. It is so weird. Because it's just that inner angel eye that's dimmed. Let me know if there is anything else that I can try.. I didn't find anything on the forums either.. Not even a write on how to replace it. I had to figure it out on my own. The one I replaced had water residue on the circuit board.
Nice video, helpful but my question is how long do u have to wait for power to cut off? I waited couple minutes and it was still on after I locked the car
Usually about 15 minutes when the car falls asleep.
If you unlock or open the door, it wakes up and turns on the detector again btw
Has this been staying securely for you using suction cups. I have a blend Mount on my f30 and not sure if I should get one for the f15
Not the factory suction cup but I bought these 3rd party suction cups with 3 cups. It works better, no vibration. I like the blend Mount but I also mount my detector high up on the windshield for better range.
@@eddiemcars I like the idea of it up high also. I think I will try your solution from amazon then move to blend mount. I am happy to be in the F15 family tomorrow :) Could be the best first mod.
Hello! What size adapter did you use prior to using the original cord? Thank k you
Mine only came with one smaller pin sized that works. RJ11 is the connector
What are those plugs u are using? The thin ones that slide in? Got a link on amazon for those by chance’?
amzn.to/31kjngW
@@eddiemcars thanks ur the man!
Oh and how about the couplings?
Any one can help me on bmw x6 g06? Thank you
So the red and the brown taps give 5v dc right?
Correct, black goes in brown and red in red.
My Valentine1 is not switching of when the ignition is off and I locked the car. Does anyone else have this problem?
It won’t right away. My turns off when the car goes to sleep. Usually in about 10 minutes. Soon as I you open the door or unlock the car it will turn back on.
Love your videos, very helpful! Keep up with the good work.
How many meters detects radars ?
It works really well. I’ve had a good mile of warning!
Please for the love of the garage gods 🙏 paint that dam garage ...
😂