Thank you for the video. My son had never got to experience watching chicks hatch from eggs. About 3 weeks ago I found this exact model on Wayfair Professional for 90 bucks , That seemed like a great deal so purchased it. We've had eggs in it for 10 days now, My son and I checked the eggs for movement yesterday and they all have movement so yay, It's looking great so far. :) .. Anyways I just liked and subscribed to your channel. :)
That's awesome! It will be a lot of fun to watch them hatch! Did you get the model with the clear front? I don't have that option so I pull mine out to hatch in a smaller clear one I have. You will see that in the hatch videos I do. Thanks for subscribing! That is really cool of you! I appreciate it!
First of all using the auto settings is the best way to go. However setting heat manually is quite easy. I do not have my machine in front of me at this time as I am doing renovations and everything is in storage...BUT the manual shows how to do this AND I believe that if you press the manual button until the heat numbers flash then you can use the + or - to change it to the desired number and it should do it...once you start doing things manually you have to do the entire cycle manually...The auto settings take care of everything. The only time I use manual is if I have an egg that is behind in development and I need to keep it going longer than what the auto settings allow.
Thanks a lot for the advice. Otherwise, they were supposed to press the button set (long press) for more than 3 seconds and use + to increase the temperature inside the incubator. God bless @@andyknope9116
I know this an old video but i just bought the same incubator on temu, did you figure out how to connect it to your phone. Any tips or tricks youve found while using it
@@amberperez-erosa1932 Unfortunately I did not attempt to connect it to my phone... So I cannot be of any help there. Perhaps someone who has commented might see this and they have and can help. No real tips or tricks other than what's in the video and I'm not sure if I mentioned it cuz it's been a while, but making sure the incubator is in a room that the temperature does not fluctuate greatly in. One of the comments on the video Talks about how a person rigged the machine so that they didn't have to keep adding water the entire time. I wish that they would post a video on how to do it. Because that would be awesome! Maintaining the humidity kept me up at night.
@@andyknope9116 Awesome, I just had a 128 egg capacity one shipped in yesterday. It seems to be on the ball today at 100F and 65% humidity wise. I was a tad bit worried when the display cover was no where near being installed right but it seems to be checking out so far.
Is that the double decker? I wouldn't know if the hatch rate from my 64 egg one to that one would apply... hopefully they have a bigger fan or 1 for each level or something. So far I have found my incubator to bet very good...but it had no issues upon arrival...if you think they may have messed up the installation on anything... maybe consider exchanging it for a different one. Just in case that's not the only thing wrong with the unit. You never know.
@@andyknope9116 No it was just someone who must have never put a sticker on anything in their life before lol. Yes its the double. Mine has two fans and they seem fairly big compared to our manna pros.
@@robertbellamy1496 That is kinda funny. Good to hear it has 2 fans! I am interested to hear how your hatching goes! I am doing another one here soon as well!
Hello. I just added a bit more water before bed (a small amount) to get the humidity 2 degrees higher than the recommend amount and then by morning it would have dropped to 2 degrees lower than the recommended amount. Then I would top it back up to the recommended amount for the day. I only sleep 6hours...so if you sleep a long time then yes you will have to watch it. I am home all day everyday so I have time to watch the humidity.
I control my humidity from a vent exit on the top keeping it half open reduce the humidity and at the last days you close the hole and increase the humidity
@andyknope9116 I have fugrd this thing out I fixed mine to where I don't even add water for the hole hatch it cost me 40$ but it was so worth it the humidity and temp r perfect threw the hole hatch and the hatch rate is really good even with shipped eggs i have a 140$ in a badass incubator lot better they 800$ not sure how to upload video or I would I am a hillbilly lol and I got rid of the alarm clock on it lol
Depending on the preset(In the chart on the last page) it tells you there. Example: Chicken Presets...chat says egg turning for week 1 is every 2 hours and it rotates for 15seconds. 2.0 (15)
My rollers aren't turning. how did you manage to get them moving? I've done everything to make them turn, connecter the motor with the wire and everything, but they're not turning regardless. thanks in advance!
@@DoniUzunova it must be a defect. I had no issues with my rollers. The things I would suggest you to double check...you already have tried...so might want to try get them to send you another one.
@@JeanMushitu-u1c Je ne parle en francais. Je suis desole. Not well enough to translate the video to french. Perhaps turn captioning on and switch it to your language...that might work. I am very sorry... otherwise I am of no help.
Thank you for the video. My son had never got to experience watching chicks hatch from eggs. About 3 weeks ago I found this exact model on Wayfair Professional for 90 bucks , That seemed like a great deal so purchased it. We've had eggs in it for 10 days now, My son and I checked the eggs for movement yesterday and they all have movement so yay, It's looking great so far. :) .. Anyways I just liked and subscribed to your channel. :)
Thank you! I love hatching eggs! I know you will too! They are so easy to take care of once they are out!
That's awesome! It will be a lot of fun to watch them hatch! Did you get the model with the clear front? I don't have that option so I pull mine out to hatch in a smaller clear one I have. You will see that in the hatch videos I do. Thanks for subscribing! That is really cool of you! I appreciate it!
Hello from Albania🇦🇱
May you help me by informing on how I can enter the heat paramater cause its really low!
Thank You!😊
First of all using the auto settings is the best way to go. However setting heat manually is quite easy. I do not have my machine in front of me at this time as I am doing renovations and everything is in storage...BUT the manual shows how to do this AND I believe that if you press the manual button until the heat numbers flash then you can use the + or - to change it to the desired number and it should do it...once you start doing things manually you have to do the entire cycle manually...The auto settings take care of everything. The only time I use manual is if I have an egg that is behind in development and I need to keep it going longer than what the auto settings allow.
Thanks a lot for the advice. Otherwise, they were supposed to press the button set (long press) for more than 3 seconds and use + to increase the temperature inside the incubator. God bless @@andyknope9116
Hi! how many chicken eggs capacity?
thanks for the video.
Depending on the size of egg. I would say if they are medium or small 25. Large 15...the 64 count is for quail eggs I believe. Hope that helps!
thanks..
@@andyknope9116
Hello.. it is a must to connect the humidifier equipment to the incubator or it can worl without it?
This is a MUST. I do NOT recommend running it without it connected.
Hey good lady how do we set the air vent during incubation stages thanks
On my unit there is no air vent to set. it just needs to stay uncovered.
I know this an old video but i just bought the same incubator on temu, did you figure out how to connect it to your phone. Any tips or tricks youve found while using it
@@amberperez-erosa1932 Unfortunately I did not attempt to connect it to my phone... So I cannot be of any help there. Perhaps someone who has commented might see this and they have and can help.
No real tips or tricks other than what's in the video and I'm not sure if I mentioned it cuz it's been a while, but making sure the incubator is in a room that the temperature does not fluctuate greatly in.
One of the comments on the video
Talks about how a person rigged the machine so that they didn't have to keep adding water the entire time. I wish that they would post a video on how to do it. Because that would be awesome! Maintaining the humidity kept me up at night.
@andyknope9116 yeah I saw he post I've been trying to figure out the same thing
nice and good information
Do you know where I can find the fuse? My heat is not working anymore. Thanks for the help.
Sorry! I haven't had that issue...so I am not sure. I would guess it is in the lid though.
Did your hatch rates improve?
Of the 12 eggs that took all 12 hatched! They took two days from start to finish, but they all hatched.
@@andyknope9116 Awesome, I just had a 128 egg capacity one shipped in yesterday. It seems to be on the ball today at 100F and 65% humidity wise. I was a tad bit worried when the display cover was no where near being installed right but it seems to be checking out so far.
Is that the double decker? I wouldn't know if the hatch rate from my 64 egg one to that one would apply... hopefully they have a bigger fan or 1 for each level or something. So far I have found my incubator to bet very good...but it had no issues upon arrival...if you think they may have messed up the installation on anything... maybe consider exchanging it for a different one. Just in case that's not the only thing wrong with the unit. You never know.
@@andyknope9116 No it was just someone who must have never put a sticker on anything in their life before lol. Yes its the double. Mine has two fans and they seem fairly big compared to our manna pros.
@@robertbellamy1496 That is kinda funny. Good to hear it has 2 fans! I am interested to hear how your hatching goes! I am doing another one here soon as well!
Ours only rotates for a few mins after you push the button and cuts back off. Any idea what im doing wrong?
When it "rotates" it does so for 10sec every 2 or 3 hours...so...if that helps let me know. If not then maybe I am not understanding what you mean...
Its turning really slow you wont notice it if u dont mark the eggs tge button push is to test the motor i hope that was solved
And how does it work in the night??like should i watch it all the time because of adding water?
Hello. I just added a bit more water before bed (a small amount) to get the humidity 2 degrees higher than the recommend amount and then by morning it would have dropped to 2 degrees lower than the recommended amount. Then I would top it back up to the recommended amount for the day. I only sleep 6hours...so if you sleep a long time then yes you will have to watch it. I am home all day everyday so I have time to watch the humidity.
What is the way to reduce humidity?
Removed the water. In my video I speak about how I put too much water in and had to suction some out to get it reduced.
I control my humidity from a vent exit on the top keeping it half open reduce the humidity and at the last days you close the hole and increase the humidity
I have a time trying to keep humidity right in mine and that ALARM my goodness lol
I check mine every 3h usually. Some people have figured out how to use the valve on the top. My unit doesn't have one...not sure why.
@andyknope9116 I have fugrd this thing out I fixed mine to where I don't even add water for the hole hatch it cost me 40$ but it was so worth it the humidity and temp r perfect threw the hole hatch and the hatch rate is really good even with shipped eggs i have a 140$ in a badass incubator lot better they 800$ not sure how to upload video or I would I am a hillbilly lol and I got rid of the alarm clock on it lol
@@ralphhager4638 THAT IS AWESOME!
@@ralphhager4638 what did you buy for the humidity issue
Am on day 5 but my display still reads day 1.Temp and humidities are okay.what could be the problem?
Help please
And after how long does turning occur,
Should I do it manually?
The temp (as per the chart in the manual) stays the same for the first 7 days. Then it automatically switches over. Hope this helps.
Depending on the preset(In the chart on the last page) it tells you there. Example: Chicken Presets...chat says egg turning for week 1 is every 2 hours and it rotates for 15seconds. 2.0 (15)
Use the presets they are the easiest. If your presets are not working please contact your seller or the manufacturer.
My rollers aren't turning. how did you manage to get them moving? I've done everything to make them turn, connecter the motor with the wire and everything, but they're not turning regardless. thanks in advance!
@@DoniUzunova it must be a defect. I had no issues with my rollers. The things I would suggest you to double check...you already have tried...so might want to try get them to send you another one.
Corwin Extensions
Joel Island
Lula Station
Toni Terrace
Pacocha Street
Hagenes Lane
Miller Heights
Wilson Margaret Smith Matthew Rodriguez Jennifer
Wuckert Turnpike
En français ça va
@@JeanMushitu-u1c Je ne parle en francais. Je suis desole. Not well enough to translate the video to french. Perhaps turn captioning on and switch it to your language...that might work. I am very sorry... otherwise I am of no help.
Sigrid Flat