I just replaced the bulb and managed to put everything back together. Definitely the biggest challenge is popping in and out that black cover, specially if it's the first time since the car was bought new. I suggest using a pocket flat screwdriver and insert it in those two slots, lift the screwdriver until you hear the plastic pop out (crack?). The rest is just rotating it out. I used an Armor All wipe to clean the black plastic cover and it helped to lubricate the little tabs. Then try to push in both tabs at the same time FIRMLY
Thanks. My driver side unit was a bit hard to remove, but stuck a flathead screwdriver in there to help out a bit. Just had to wiggle it a bit harder than I thought.
This was helpful. I was on the road and I needed to replace that light. I especially liked having the tool list since I didn't have my tools with me. The putty knife worked out better than the flat head screwdriver.
You replaced the tailight not the brake light bulb. Would have also been helpful to discuss whether bulb was not working even though it wasn't burned out (like my situation) and when fuse is fine.
I don’t understand,I did exactly what this guy did but when try to remove the bulb from it,it wouldn’t come off,I try to pull as hard as I can but the bulb wouldn’t budge off of my 2017 Kia Sedona 🤷♂️ I don’t understand
There's a lock groove that it sits snugly in. In this particular model, if you're holding the base of the bulb in your left hand, and the top of the bulb in your right hand, you twist the bulb slightly clockwise to unlock it and jiggle it out of the groove to pop it out. If it's not working and you're at your wits' end, try twisting slightly either clockwise or counter clockwise before pulling the bulb out. Might be different for different models.
After taking it apart why did you not show the Bulb Number, so your video information is incomplete. It would take much to say what the Bulb Part Number is. This is a Incomplete and BAD video.
Trade number 2357. That’s what it was for the 2021 Kia Sedona that I did for a relative today. It is readily available anywhere including Walmart or any auto parts store.
Thank you easy breezy.
Awesome!
Just changed one on my 2018 Sedona, same as your video......ez-peezee. Thanks
Awesome! Glad the video was helpful
Thanks, worked like a charm.
Awesome! Glad the video was helpful
easy. thanks man!
Super helpful. Once I watched it I was able to fix our light assembly in 5 minutes
Awesome! Glad the video was helpful
Oh my god that's so helpful, I watched your video like a year ago for one side and now I just had to do the other again lol thank you so much
Awesome! Glad the video was helpful
Thank you, this still matches the KIA Sedona 2020 model (before the Carnival model) 👍
I just replaced the bulb and managed to put everything back together. Definitely the biggest challenge is popping in and out that black cover, specially if it's the first time since the car was bought new.
I suggest using a pocket flat screwdriver and insert it in those two slots, lift the screwdriver until you hear the plastic pop out (crack?). The rest is just rotating it out.
I used an Armor All wipe to clean the black plastic cover and it helped to lubricate the little tabs. Then try to push in both tabs at the same time FIRMLY
Awesome! Glad the video was helpful
Great video! Watched and did the bulb swap today with some new LEDs. Works great!!
Thanks for the visuals... I appreciate you...
Thanks. My driver side unit was a bit hard to remove, but stuck a flathead screwdriver in there to help out a bit. Just had to wiggle it a bit harder than I thought.
Awesome! Glad the video was helpful
❤️ great help!
Thanks! Very helpful!
So helpful. Thank you for doing this.
This was helpful. I was on the road and I needed to replace that light. I especially liked having the tool list since I didn't have my tools with me. The putty knife worked out better than the flat head screwdriver.
You replaced the tailight not the brake light bulb. Would have also been helpful to discuss whether bulb was not working even though it wasn't burned out (like my situation) and when fuse is fine.
Thanks Ron for your feedback. I will to improve the content I’m sharing to further help DIY’ers
Perfect!
Thanks a million.
How soon until you had to replace the bulb again?
A year or so
Thank you!!
Thanks, different from my 2007 Hyundai min Van, why didn't they use LED lights, cheap KIA.
I don’t understand,I did exactly what this guy did but when try to remove the bulb from it,it wouldn’t come off,I try to pull as hard as I can but the bulb wouldn’t budge off of my 2017 Kia Sedona 🤷♂️ I don’t understand
Hi Joshua, thanks for your post. It’s in there pretty tight, after taking the screws out, you have to tug on it pretty good for it to come loose.
@@DEEJAYGEEOOO I see,so you just have to pull on it really hard or something.
There's a lock groove that it sits snugly in. In this particular model, if you're holding the base of the bulb in your left hand, and the top of the bulb in your right hand, you twist the bulb slightly clockwise to unlock it and jiggle it out of the groove to pop it out. If it's not working and you're at your wits' end, try twisting slightly either clockwise or counter clockwise before pulling the bulb out. Might be different for different models.
please stop the horn honking at the beginning of your video.
After taking it apart why did you not show the Bulb Number, so your video information is incomplete. It would take much to say what the Bulb Part Number is. This is a Incomplete and BAD video.
I think you should rewatch the video. The bulb number is provided at the :12 mark.
Trade number 2357. That’s what it was for the 2021 Kia Sedona that I did for a relative today. It is readily available anywhere including Walmart or any auto parts store.