Thank you! This happened to me while i was driving. Got home, checked all the wires and they were good. I thought my stereo just crapped out. Was already looking for a replacement when i came across you video.
Very helpful! Thanks! This happened a few years ago when my Nissan Frontier was sitting at the airport for a week while we were at the in-laws house. I did all of the regular stuff like taking it to the shop, having them check the wiring, about to.buy a new unit, etc., and got nowhere. I plugged it back in myself in the shop parking lot and it went on like a champ. Here we are, 3 years later and we just got back from the in-laws house again. After 3 weeks of the truck sitting I the garage, it did this again. While watching this video, I had the completely unplugged unit sitting in my lap and holding down the SRC button to force the circuits to attempt to use every bit of electricity that lingers in the system after it is unplugged. I plugged the unit back in with the intent of doing this fix, but the error did not come back after simply holding the button for the duration of this video. So, if this particular fix didn't work for you, try completely unplugging the unit, holding down the SRC button for a few minutes (count it out to 120 if you have to), and then try plugging it back in. Keep this stuff up, OP! Great video and super helpful!!🤙
mano tengo 4 años con el radio bloqueado y hasta ahora tu video me ayudo y los desbloquee gracias a ti ya te deje el me gusta y me suscribire a tu canal gracias desde venezuela 👍👍👍👍👍👍
saludos con la explicacion en tu video solucione la advertencia en mi JVC , solo que si desconecto la parte frontal y la vuelvo a colocar. me vuelve a salir la advertencia Warning
Hey, guys. So, a few hours after this fix, the error returned. I thought my unit might be broken, but I found another video that provided a helpful tip that actually did work for me. If the error returns for you after doing the steps in the video do not permanently fix your issue, simply turn off your car, remove the NEGATIVE terminal from your car battery and wait a few seconds to a minute. Then, reconnect the negative terminal and start your vehicle. When restarting, the issue should be clear. I was expecting to have to add my phone back to the Bluetooth list and all that jazz, but all I had to do was reset the time and I am good to go, now.
Mine did this miswiring messege after i worked on my drivers side door (replaced mirror) come to find out i damaged the speaker in that door banging around, trying to get the screw out of the window roll down knob (screw got stripped) replaced speaker, messege didn't show up , problem solved
IN MY AUDIO SYSTEM THE BUTTONS STOP WORKING, I HAVE TO UNLOCK IT TO BE ABLE TO TURN IT OFF AND ALSO THE LEGEND OF ¨PRODUCTION MODE¨ APPEARS ON THE SCREEN. HAS ANYONE BEEN ABLE TO REPAIR IT?
@@nestorautorepair You have production mode on display when you restart the radio. See when you select “AUX”. How can I exit from production mode? thank you
I take it back. I'm a retarded and did everything ass backwards due to me being bad at electrical in general. Eventually found a PDF on Google for my radio model owners manual, found out what this exact message means, which is *a speaker isn't connected correctly.* Left my wiring harness out (in my window regulator range) and when I rolled down the window it yanked the wires out from the speaker. Re routed the wires and reset the radio. It all works great now. 😅
after 40 seconds ive come to the realization you dont really know much about what youre doing. you need to say what kind of JVC youre operating with cause i promise, not every single jvc has that lil button. so what do they do then?
Thank you! This happened to me while i was driving. Got home, checked all the wires and they were good. I thought my stereo just crapped out. Was already looking for a replacement when i came across you video.
Thanks God ,, good I'm glad you run into my video and got it fix
Buenas amigo tengo un problema así pro reinicio y en lo que quito la careta se vuelve a bloquear
No la quite
Very helpful! Thanks! This happened a few years ago when my Nissan Frontier was sitting at the airport for a week while we were at the in-laws house. I did all of the regular stuff like taking it to the shop, having them check the wiring, about to.buy a new unit, etc., and got nowhere. I plugged it back in myself in the shop parking lot and it went on like a champ. Here we are, 3 years later and we just got back from the in-laws house again. After 3 weeks of the truck sitting I the garage, it did this again.
While watching this video, I had the completely unplugged unit sitting in my lap and holding down the SRC button to force the circuits to attempt to use every bit of electricity that lingers in the system after it is unplugged.
I plugged the unit back in with the intent of doing this fix, but the error did not come back after simply holding the button for the duration of this video. So, if this particular fix didn't work for you, try completely unplugging the unit, holding down the SRC button for a few minutes (count it out to 120 if you have to), and then try plugging it back in.
Keep this stuff up, OP! Great video and super helpful!!🤙
Oh wow cool story thanks for sharing boss and thanks for your feedback
mano tengo 4 años con el radio bloqueado y hasta ahora tu video me ayudo y los desbloquee gracias a ti ya te deje el me gusta y me suscribire a tu canal gracias desde venezuela 👍👍👍👍👍👍
Wow que bueno Gracias por TU Apollo , salulos 🙏👍👍
Thanks bro I had bought a new stereo was going to put it in but saw your video push the freaking button and it work thanks
Hey thanks for the feedback boss I'm glad it worked out ,, now you know
This worked for me! I just pushed the little reset button and my stereo reset its self, bada boom bada bing! Thanks!
You're welcome I'm glad it worked out for you
saludos con la explicacion en tu video solucione la advertencia en mi JVC , solo que si desconecto la parte frontal y la vuelvo a colocar. me vuelve a salir la advertencia Warning
Dude u r awesome and thanks bro I appreciate god bless you
Hey, guys. So, a few hours after this fix, the error returned. I thought my unit might be broken, but I found another video that provided a helpful tip that actually did work for me.
If the error returns for you after doing the steps in the video do not permanently fix your issue, simply turn off your car, remove the NEGATIVE terminal from your car battery and wait a few seconds to a minute. Then, reconnect the negative terminal and start your vehicle.
When restarting, the issue should be clear.
I was expecting to have to add my phone back to the Bluetooth list and all that jazz, but all I had to do was reset the time and I am good to go, now.
👍✅
I've tried following this method. It's still the same. Do you have any other solutions?
How to fix "production mode " it show always.
Ok
Me too. :(
Thank u so much I was with no radio for days
Exactly the video i needed. Thank you.
So how do I connect the BLUETOOTH or which wires or cables deals with it. Because the Bluetooth button doesn't work
For the Bluetooth you don't need any wire , just link it to your phone
Mine has a "production mode" like the message that came out on yours and my volume isn't going up or down
How can I exit from production mode?
Back
@@nestorautorepair No it doesn't work. Please can you help me?
Thank you so much solved my issue
You're welcome , thanks for your feedback
The problem persists when the key is removed because the recorder is connected to the vehicle's ignition. Could you help please?
Your yellow wire is not wire connected in the correct place
So where should it connect?
If your car one has only one key that's all you need
Mine did this miswiring messege after i worked on my drivers side door (replaced mirror) come to find out i damaged the speaker in that door banging around, trying to get the screw out of the window roll down knob (screw got stripped) replaced speaker, messege didn't show up , problem solved
Good thanks for sharing
How did you get it fixed where did you go
What if the reset button is behind the panel
In that case the panel need to come off
But to much time i try but not ok ple give me edvice
Como puedo hacer para que no se apage jvc ago todo eso y funciona pero pasan 20 minutos y se apaga y vuelvo aser todo l o del vídeo
Algo ESTA Malo en El radio alguna bobina cuando calienta ouere El contacto , tendria que Abril El radio y soldarle
Gracias me sirvió de mucho
Lo solucionaste??
Hola así está el mío que pieza debo revisar que se apaga después de 15 minutos sonando y los reseteo otra vez y suena bien y se apaga a 15
Sir i do this but now it shows miswiring check wiring connection then rest unit
How do u fix when it says productión mode
I don't get it
Thank you I have that problem now
Your welcome
why my power off and volume cannot function?
Bad bottom
IN MY AUDIO SYSTEM THE BUTTONS STOP WORKING, I HAVE TO UNLOCK IT TO BE ABLE TO TURN IT OFF AND ALSO THE LEGEND OF ¨PRODUCTION MODE¨ APPEARS ON THE SCREEN. HAS ANYONE BEEN ABLE TO REPAIR IT?
Wow sound like a challenge to fix
And how do I remove the production mode
Mmmm I don't get it ? What are you trying to remove ?
Me too. I have PRODUCTION MODE displayed on screen.
@@nestorautorepair You have production mode on display when you restart the radio. See when you select “AUX”. How can I exit from production mode? thank you
Just hit back or home
I have a different maybe couple year newer model and it didn't work. Redid the wiring, did this reset method, didn't work 😫
Oh sorry about that then your radio is bad I will think so
I take it back. I'm a retarded and did everything ass backwards due to me being bad at electrical in general. Eventually found a PDF on Google for my radio model owners manual, found out what this exact message means, which is *a speaker isn't connected correctly.* Left my wiring harness out (in my window regulator range) and when I rolled down the window it yanked the wires out from the speaker. Re routed the wires and reset the radio. It all works great now. 😅
Thanks for the reset procedure at least. 👍
Congratulations you got it
I did it but still have msg
Make sure you push it in good
Hola hermano se me apaga el radio donde puedo encontrar más información de ese radio
Dude thank you !!!
You're welcome
He’s a fucken life saver !!!
Thanks
1NITIDO you should make a video on how to install it the right way.
Yes I will
Muchas gracias hermano
De nada bro
What if that don't work
Then is a bad radio
I have also same problam bro.
Did it work
Thanks bro
Your welcome
Làm giống vậy nhưng không hoạt động
👌👍👍
✅💪🙏
No set ok
😮
In my car audio system showing like this
Please detach the front panel
How to solve this
after 40 seconds ive come to the realization you dont really know much about what youre doing. you need to say what kind of JVC youre operating with cause i promise, not every single jvc has that lil button. so what do they do then?
Dude u r awesome and thanks bro I appreciate god bless you
Thanks boss same to you
Thanks bro
You're welcome boss thanks for your feedback