SUR RON Installing a SWITCH on the Green Wire for $5.00!
ฝัง
- เผยแพร่เมื่อ 24 ก.ค. 2024
- I have had so many people request this video! This shows you how I installed a switch on the green governor wire on my Sur Ron! It only cost $5 and took about 5 minutes! Please SUBSCRIBE for more how to & DIY videos! THANKS!
Link for Switch
amzn.to/3X8K3K9
Well done! I hope you make the $5 back with lots of views!
Hahah me too! 😂🙏🤘
Thanks sooo much!! needed to so if this worked as im getting one soon
It works like a charm!
There is a much easier way of doing this without cutting any wire. Just google speed limit break program. Just turn on bike, break 5 short and one long time on right brake. Then its open for full speed. Reset when turn off. That way if you are stoped by police then just turn of bike. And when you turn on again its back to basic :)
Does it work on the Talaria Sting as well, I would like to know because its strict rules here in Sweden?
I haven’t tried it on a talaria but if it has the same wire, I’m sure it’ll work!
Can you do this with another switch or just this one because of the voltages?
You would have to check the voltage on whatever switch you want to use. To make sure they are similar to this one
hey can you do this with the ultra bee as well and if so can you do a vid please
I still haven’t even had a chance to ride one yet or even see one in public! It should work on Anything with the green wire that gets cut
What happens if you switch while driving? Will it stick to the current mode until turned off, or will it immediately limit back?
It’ll work!
@@SurRonSender Thanks, but what will happen when switching while driving? Will it slow down or speed up to adjust to the changed limit?
@@qwertzuio209I saw in another vid that it switches speed modes while on the throttle
does it work without turning the bike on and off?
Yes it does! I do it in the video to test it
Would it somehow be possible to switch it by bluetooth connection instead of a physical switch?
I’m sure it’ll be possible if you find the switch haha
@SurRonSender Ha thx for the quick reply man! Got a new sub! Greetings from the EU
Thank you! I appreciate the support! I’ll look into those switches and see if they exist and if they do I’ll make a video!
@@SurRonSender That would be so rad bro!
Is that a 2023 X? Its not street legal where I live without the wire in place, but the seller told me it didnt even have a green wire because its the X. That true?
I have the 22 X and it came with the wire. You just have to cut the sheath back to be able to see it.
Can you make a video of how to limit the speed to 28 mph please
Install the switch and turn it on or connect the green wires if you cut them, then put the bike in eco mode.
Is there any way to conceal the switch better?
Yeah! Like I said I’m the video, you can drill a hole into your battery cover or you get a different mount and put it anywhere really.
@@SurRonSender Would there also be a way to permanently put it to 30 mph?
So clutch! And this works on the x160?
Yes, it should work on all bikes that have the green governor wire
@@SurRonSender when i flick the switch does it matter if the bike is on or off?
also for the wire connectors i grabbed the orange 600v ones, the other option was blue 300v max ones. Is the orange the move?
Damn, i think i’ve hit the last road block.. The x160 doesn’t have the looped green wire in the wire sleeve. Online says it’s deeper in the bike!🥲
Nope! Doesn’t matter if the bike is on or off!
Does cutting the wire do anything bad to it
No! It’s made to be cut, that’s why you’ll notice the huge loop that they add to the wire for you to cut. It’s just like a governor for kids or people less experienced.
@@SurRonSender is that a light bee?
@@Shawnbowen951 Yeah
The JM speed limiter is a better way to go
But is it cheaper? 🤔