You can add this to your video description to devide the video into sections : Introduction to AUTOSAR COM Module: 00:01:53 Who is Mohamed Seada 00:02:24 How is the Role of being architect in elektrobit germany is different from the usual software development from AUTOSAR point of view 00:05:52 Start of the presentation 00:06:08 Agenda 00:06:46 I. Introduction : 00:13:56 I.a. What is the purpose of the COM module 00:15:35 I.b. Example 00:18:40 I.c. Minimum Delay Timer (MDT) (in the Example) 00:23:12 I.d. Example (from AUTOSAR point of view) 00:25:23 II. Dependencies 00:28:12 III. Functional Specification : 00:28:26 I. Normal Operation : 00:28:26 I.a. Stratup-Behavior 00:30:42 I.b. Communication Modes : 00:34:44 I.b.1. Example 00:37:30 I.b.2. Signal Flow & TxMode Selection 00:41:35 I.c. Replication Of Signal Transmission Requests 00:47:12 I.d. Retry Failed Transmission Requests 00:49:16 I.e. Signal Invalidation 00:53:17 I.f. Handling of I-PDUs : 00:55:15 I.f.1. Starting of I-PDU Groups 00:59:00 I.f.2. Scenarios After I-PDU Started by I-PDU Group Start 00:59:12 I.f.3. Stopping of I-PDU Groups 01:00:55 I.g. Signal Indication (Unpacking of I-PDU) : 01:01:42 I.g.1. Immediate Mode 01:02:11 I.g.2. Deferred Mode 01:02:32 I.g.3. Explanation Graph 01:04:06 I.h. Deadline Monitoring (DM) : 01:05:03 I.h.1. Reception Deadline Monitoring (RDM) 01:08:40 I.h.2. Transmission Deadline Monitoring (TDM) 01:10:20 II. Signal Groups - Complex Data Types : 01:10:31 II.a. Introduction 01:11:53 II.b. Initialization 01:12:18 II.c. Transmission 01:13:39 II.d. Reception 01:14:05 II.e. Notifications 01:14:20 II.f. Attributes of Signal Group 01:15:44 II.g. UINT8-array based access to signal groups 01:19:12 III. Large DataTypes : 01:19:26 III.a. Introduction 01:20:38 III.b. Transmission of Large Signals/I-PDUs 01:22:54 III.c. Reception of Large Signals/I-PDUs 01:24:02 IV. Dynamic Length Signals : 01:24:42 IV.a. Introduction 01:26:18 IV.b. Transmission of Dynamic Length Signals/I-PDUs 01:27:35 IV.c. Reception of Dynamic Length Signals/I-PDUs 01:28:29 V. Interface between COM & PduR 01:29:32 VI. Update-Bits: 01:30:09 VI.a. Introduction 01:31:31 VI.b. Sender Side 01:32:37 VI.c. Receiver Side 01:34:16 IV. Q&A Part 2: (coming soon): VII. Data Sequence Control: VII.a. Introduction: VII.b. Sender Side: VII.c. Receiver Side: VIII. Communication Protection: VIII.a. Introduction: VIII.b Sender Side: VIII.c Receiver Side: VIII.d Constraints: IX. Signal Gateway: IX.a. Introduction: IX.b. Dealing with Signals: IX.c. Dealing with Group Signals: IX.d. Routing of Out-Timed Signals and Signal Groups: IX.e. Handling of Update-Bits: IX.f. Decoupling Signal Gateway:
@Embedded Meetup Thank you for this valuable webinar, and really looking forward to part 2, if it's possible I hope you provide us with the webinar slides, thank you in advance!
Thanks for joining us, presentation slides : drive.google.com/file/d/1iMgVC4DsjMKJCH89jn7bw_FZRLKiqCZ2/view?usp=sharing Looking forward meeting you in the next webinar.
You can add this to your video description to devide the video into sections :
Introduction to AUTOSAR COM Module:
00:01:53 Who is Mohamed Seada
00:02:24 How is the Role of being architect in elektrobit germany is different from the usual software development from AUTOSAR point of view
00:05:52 Start of the presentation
00:06:08 Agenda
00:06:46 I. Introduction :
00:13:56 I.a. What is the purpose of the COM module
00:15:35 I.b. Example
00:18:40 I.c. Minimum Delay Timer (MDT) (in the Example)
00:23:12 I.d. Example (from AUTOSAR point of view)
00:25:23 II. Dependencies
00:28:12 III. Functional Specification :
00:28:26 I. Normal Operation :
00:28:26 I.a. Stratup-Behavior
00:30:42 I.b. Communication Modes :
00:34:44 I.b.1. Example
00:37:30 I.b.2. Signal Flow & TxMode Selection
00:41:35 I.c. Replication Of Signal Transmission Requests
00:47:12 I.d. Retry Failed Transmission Requests
00:49:16 I.e. Signal Invalidation
00:53:17 I.f. Handling of I-PDUs :
00:55:15 I.f.1. Starting of I-PDU Groups
00:59:00 I.f.2. Scenarios After I-PDU Started by I-PDU Group Start
00:59:12 I.f.3. Stopping of I-PDU Groups
01:00:55 I.g. Signal Indication (Unpacking of I-PDU) :
01:01:42 I.g.1. Immediate Mode
01:02:11 I.g.2. Deferred Mode
01:02:32 I.g.3. Explanation Graph
01:04:06 I.h. Deadline Monitoring (DM) :
01:05:03 I.h.1. Reception Deadline Monitoring (RDM)
01:08:40 I.h.2. Transmission Deadline Monitoring (TDM)
01:10:20 II. Signal Groups - Complex Data Types :
01:10:31 II.a. Introduction
01:11:53 II.b. Initialization
01:12:18 II.c. Transmission
01:13:39 II.d. Reception
01:14:05 II.e. Notifications
01:14:20 II.f. Attributes of Signal Group
01:15:44 II.g. UINT8-array based access to signal groups
01:19:12 III. Large DataTypes :
01:19:26 III.a. Introduction
01:20:38 III.b. Transmission of Large Signals/I-PDUs
01:22:54 III.c. Reception of Large Signals/I-PDUs
01:24:02 IV. Dynamic Length Signals :
01:24:42 IV.a. Introduction
01:26:18 IV.b. Transmission of Dynamic Length Signals/I-PDUs
01:27:35 IV.c. Reception of Dynamic Length Signals/I-PDUs
01:28:29 V. Interface between COM & PduR
01:29:32 VI. Update-Bits:
01:30:09 VI.a. Introduction
01:31:31 VI.b. Sender Side
01:32:37 VI.c. Receiver Side
01:34:16 IV. Q&A
Part 2: (coming soon):
VII. Data Sequence Control:
VII.a. Introduction:
VII.b. Sender Side:
VII.c. Receiver Side:
VIII. Communication Protection:
VIII.a. Introduction:
VIII.b Sender Side:
VIII.c Receiver Side:
VIII.d Constraints:
IX. Signal Gateway:
IX.a. Introduction:
IX.b. Dealing with Signals:
IX.c. Dealing with Group Signals:
IX.d. Routing of Out-Timed Signals and Signal Groups:
IX.e. Handling of Update-Bits:
IX.f. Decoupling Signal Gateway:
Presentation slides : drive.google.com/file/d/1iMgVC4DsjMKJCH89jn7bw_FZRLKiqCZ2/view?usp=sharing
This is a helpful video
@Embedded Meetup Thank you for this valuable webinar, and really looking forward to part 2, if it's possible I hope you provide us with the webinar slides, thank you in advance!
Thanks for joining us, presentation slides : drive.google.com/file/d/1iMgVC4DsjMKJCH89jn7bw_FZRLKiqCZ2/view?usp=sharing
Looking forward meeting you in the next webinar.