Right now video is not available, but i can provide the parameters here: Group 0 Acc: 80 s Dec: 80 s St1 : 18 Hz Group 1 Dr. 20 : 170 Hz Group 2 bA.53 : 160 Hz Group 5 In.68 : 9 In.69 : 7 For connections" P1 is forward P2 is reverse P4 is high speed P5 is low speed CM is common
I want to program an inverter -lslv h100 washing machine
Very detailed video Mister!
But i need setings for LS S100 model for washing machine.
If you can put video.😁
Right now video is not available, but i can provide the parameters here:
Group 0
Acc: 80 s
Dec: 80 s
St1 : 18 Hz
Group 1
Dr. 20 : 170 Hz
Group 2
bA.53 : 160 Hz
Group 5
In.68 : 9
In.69 : 7
For connections"
P1 is forward
P2 is reverse
P4 is high speed
P5 is low speed
CM is common
@@howto...8040 It worked!Thank you very much!
Sir how to control forward and reverse by outlet switch
P1 and CM terminal will be FORWARD direction, P2 and CM terminal will be REVERSE direction. So just connect the wire to switch
@@howto...8040 sir I connect same like this but not work maybe change the program like frq settings
Check "drv" by pressing down key. Then press ent, and check it should be 1. Still no, then make factory reset by parameter H93 (make it 1).
Hi,in high speed mode.speed is fluctuating.any remedies
There might be no, check if sensorless helps
@@howto...8040 hi,thanks.will it effect the ftb
And the bottom stop where is?
You mean the button? After signal is removed from P1 or P2, the motor will stop