That came out sic ! Ur channel Inspired me to pick up a wrecked 08 cbr 600rr to rebuild and I'm almost finished getting it all pimped out . Can't wait to see what's the next bike u gonna build.
I literally picked up a 2004 Yamaha R1 Friday night. The fairings are shot, missing half of their hardware. Im tinkering to repair the front cowl, but have intentions of buying a new set in the long run. Definitely got a subscribe from me, looking at repairing what I can rather than replacing. Saw your method on the clutch case and intend to do the same for mine as it has some wounds. Fantastic video
It was a bike after a crush so you should drain and change oil before any starts attempts, you can check if there are any metal shaving etc, also you can check cylinder walls with endoscopic camera. And next time maby you can clean the bolt for the rear part you changed in previous video from rust with little bit of sandpaper. Other than that I love every part of your videos, good job !
Love your vids but thats the first time I've seen you repair damage to parts (engine casings) rather than replace lol. I think parts are cheap in the US - here in Aus, postage is a killer too.
nice job! There are a few little things that can catch you out easily on this era of R1. Firstly when you put the coil packs wiring harness back in, its very important the loom sits behind the coils not infront. or over time the fans will chew on the wires. the next issue is the damn coolant pipe that returns to the top of the rad. its the plastic one on the right hand side, the seams split(even on 1 year old pipe). you only notice a white stain on the pipe as when the fairing is on you dont witness it leaking. this is an engine killer as this bike wont show HOT warning until the coolant is nearly empty. by then the pistons have swollen and are ruined. You didnt show yourself fighting with the clutch cover putting it back on!! haha, its a pest to align everything!! Glad you saved this bike. I really like the 5VY
Thanks for the feedback Jimmy! I know the fans like to chew up the wires on these bikes, but I didn't know about that coolant pipe issue. And yes for the sake of keeping the video short I didn't show myself fumbling with the clutch cover 😂 no matter how many times I do it, it's always a pain....
Great job!! I've been waiting for this final episode. I have a R1 from 2005 and bought new fairings almost one year ago, and they've been laying in my garage ever since. You have truly inspired me to take the step and start to work on my bike. I was afraid to mess it up, but thanks to you and your videos my bike is now all done. I just wish I had found your channel earlier, then I've ordered my fairings from Auctmarts instead. Not so pleased with the final fit, but still ok. Greetings from Sweden!
I would start updating it a little bit since you can’t ride it yet. Start with those giant pumpkins on the back where taillights should be lol. Great build though as always
hello young man, I follow you France I love your work and watch you make these repairs (it gives me tracks to renovate at the moment a Kawasaki of 1995). I have already reviewed several of your videos (unfortunately I have to put subtitles in French but I can follow you) and it was just to tell you good continuation
happy how it turned out for you. Personally i never try to match shades of the same colour. I just pick completely different colours that match. I might have considered a yellow set of fairings with the blue tank with some designs to compliment the blue?? Anyhow. Look forward to the next build.
First off all i love your videos and i aspire to do things like you and i have a question for you what do you think about straightening frames in motorcycles is it safe?
Hey there. Love your videos and I have a question. In your proffesional opinion is there a way to replenish my 2015 yamaha mt07's tail fairings. They are pretty faded and look ugly. Thank you in advance. NOTE: There is an economic crisis in where i live and the fairings are extremely expensive. Thats why im looking for a DIY solution.
Love your videos man. This one hit home because I have this same gen r1 and my motor blew and you have inspired me to motor swap it myself. Hard part is finding a decent parts bike or motor. Also where do you find most of your leads to buy the wrecked bikes you have? Also are they salvaged titles?
Always love seeing someone who doesn’t know how parts actually work together so they replace plugs when I bike dies out from throttle. Or greasing an axle thinking that it needs greased, give me a good chuckle
11:30-11:35 Lmaooo, so I’m guessing that the right side fairing never aligns properly with headlight faring i have the same thing with my 04 R1 😂😂 at least it’s good to know im not the only one
those damn tiny little tabs at the top of the fairing bend on older ones and never sit correct, then trying to do origami under the front nose with all the plastics. LOL
not sure if someone has asked this already but how do you know so much about bikes. Do you look at specs and handbooks or did you go to school? A good lengthily QA video would be cool
It would be brilliant if you slowed the video down when fitting everything in place.speed it up again when tightening the the nuts and bolts....we are missing out on crucial peices of your what could be excellent video. Thanks
pitty you didn't do a step by step video on fairing install there's a lot of tricky panels and clips that need to be done in a special order and soon as it went in fast forward of the important bits i new i was watching the wrong video heading. back to the jigsaw puzzle or another video dam it, i didn't remove them the previous owner did. thanks anyway got a couple of clues from it.
Auctmart has always gotten me great fairings. Bike looks great! Was that a aftermarket headlight stay bracket? If so what brand? I got one off Amazon and it didn’t fit at all lol
well done
That came out sic ! Ur channel Inspired me to pick up a wrecked 08 cbr 600rr to rebuild and I'm almost finished getting it all pimped out . Can't wait to see what's the next bike u gonna build.
I literally picked up a 2004 Yamaha R1 Friday night. The fairings are shot, missing half of their hardware. Im tinkering to repair the front cowl, but have intentions of buying a new set in the long run. Definitely got a subscribe from me, looking at repairing what I can rather than replacing. Saw your method on the clutch case and intend to do the same for mine as it has some wounds. Fantastic video
It was a bike after a crush so you should drain and change oil before any starts attempts, you can check if there are any metal shaving etc, also you can check cylinder walls with endoscopic camera. And next time maby you can clean the bolt for the rear part you changed in previous video from rust with little bit of sandpaper. Other than that I love every part of your videos, good job !
Love your vids but thats the first time I've seen you repair damage to parts (engine casings) rather than replace lol. I think parts are cheap in the US - here in Aus, postage is a killer too.
the scratches weren't too bad or deep on the side covers so i just wanted to clean them up a bit.
One of they best 2004 bikes made . I'd buy that 1000%
Been so eager for this entire series to be over, love watching your videos!! Very therapeutic, haha!! Have a nice day!! Also ooof on that rebuild !!
Another bike resurrected by Rob, job well done!
Beautiful bike bro
a little suggestion wid da lights - can change 'em to white for the final touch wid better throw @ nite
nice job! There are a few little things that can catch you out easily on this era of R1. Firstly when you put the coil packs wiring harness back in, its very important the loom sits behind the coils not infront. or over time the fans will chew on the wires. the next issue is the damn coolant pipe that returns to the top of the rad. its the plastic one on the right hand side, the seams split(even on 1 year old pipe). you only notice a white stain on the pipe as when the fairing is on you dont witness it leaking. this is an engine killer as this bike wont show HOT warning until the coolant is nearly empty. by then the pistons have swollen and are ruined. You didnt show yourself fighting with the clutch cover putting it back on!! haha, its a pest to align everything!! Glad you saved this bike. I really like the 5VY
Thanks for the feedback Jimmy! I know the fans like to chew up the wires on these bikes, but I didn't know about that coolant pipe issue. And yes for the sake of keeping the video short I didn't show myself fumbling with the clutch cover 😂 no matter how many times I do it, it's always a pain....
Great job!! I've been waiting for this final episode. I have a R1 from 2005 and bought new fairings almost one year ago, and they've been laying in my garage ever since. You have truly inspired me to take the step and start to work on my bike. I was afraid to mess it up, but thanks to you and your videos my bike is now all done. I just wish I had found your channel earlier, then I've ordered my fairings from Auctmarts instead. Not so pleased with the final fit, but still ok. Greetings from Sweden!
whoever bought this bike is a lucky man
Shame you couldn’t get some led headlight units fella. Turned out great.
Blessed Lent Season Rob..awsm wid mah fav bike in the whole wide world...D R1
this time i can say GREAT WORK! almost from stock except the exhausts. hope she can find a new owner!
Rob the microns look like a set of an F-18's afterburners...grt turnout wid dis blue beauty! Peace - Ben from India
I would start updating it a little bit since you can’t ride it yet. Start with those giant pumpkins on the back where taillights should be lol. Great build though as always
hello young man, I follow you France I love your work and watch you make these repairs (it gives me tracks to renovate at the moment a Kawasaki of 1995). I have already reviewed several of your videos (unfortunately I have to put subtitles in French but I can follow you) and it was just to tell you good continuation
Nice work!! I laughed when I saw the rear indicators ^^
Hey what paint did you use for the parts at the beginning? They actually came out pretty nice
Hi Rob! I'll see all videos and i like them very much! I am from Argentina and great fan ir you
You always do an excellent job. Thanks for sharing
I am from India.
Love your rebuild
I love your videos I watched almost every video you have on your channel what you're doing is very cool🇿🇦
happy how it turned out for you. Personally i never try to match shades of the same colour. I just pick completely different colours that match. I might have considered a yellow set of fairings with the blue tank with some designs to compliment the blue?? Anyhow. Look forward to the next build.
Yest year R1. Remember my dad handing me the Yamaha bike catalog and showing it to all the kids in kindergarten 😂
love it but I would really change the rear lights for newer LED ones
Great job Rob, love the blue, wicked! Regards from Scotland.
I love too watch your videos while on lunch break keep up the great work
You should build a powder coating over (really just an old electric stove). It would add another aspect to your repairs.
Looking and sounding great 👍🇬🇧
Damn that thing sold quick!
You have made a really nice job of this. Loving all the content and watching all the way from Scotland 🏴 👍👌🙏🏻 ✌️
You did an heck of an rebuild! #Respect
Thanks Billy! 🤟
You do do fantastic work brother . 👍🏻👍🏻👍🏻👍🏻
Finally! Felt like forever waiting and well worth it! Nice video my man
Man clean R1 🤌🏼🍻
What paint was used for the case covers? High heat grill paint or something?
Amazing 🤩 brother... Luv from INDIA
What's the spray paint brand and color number for the black finish that you used on the engine sections?
Zor GAP YO SHOGIRTLIKGA OLMISIZMI UZBEKISTAN 😎
What grit sandpaper do you use? May I know the brand of touch up paint you recommend for matt black parts? Thanks!
Nice work i kinda wish u can do honda hornet old version repair it would save me
Nice job Rob!!!
how do you do the ram intakes? the plastic mount piece that's shaped like a triangle I'm having issues figuring out where to put it
Nice video. Glad there’s minimal music.
R1s are just too dam cool… 🤘🏻
Great job man! Imma huge fan here from Philippines!🤟🏻
First off all i love your videos and i aspire to do things like you and i have a question for you what do you think about straightening frames in motorcycles is it safe?
The bike looks amazing. Great job!!
Good work 👍🏻
Do you use a specific paint for repainting the case covers? Or is it just a generic black paint?
turned out so nice..great job, RK!👍💯
really niceeee, someday we will have a raffle!!! that's my dream hahahahaha
I love the color...great job on this bike 👍🏻
Wow! Your craft is very good!
Maybe my bike can rebuild,just kidding
Good work rk
Hey there. Love your videos and I have a question. In your proffesional opinion is there a way to replenish my 2015 yamaha mt07's tail fairings. They are pretty faded and look ugly. Thank you in advance.
NOTE: There is an economic crisis in where i live and the fairings are extremely expensive. Thats why im looking for a DIY solution.
Hey man is there any way to change the face of 04 r1 to a newer one like 2010 ?
How long does it usually take for you to get the fairings from them?
Welcome back bro
🤟😎
Whats the spray paint you used?
buy damaged bike 1.070$, invest another 3.000$, now the bike worth 3.500$-3.800$ = profit👍👍
what i'd do for one of these bikes lol. awesome video!!!
Do we still have Angel GTs?
What spray ?
how much ether till it locks up?
Love your videos man. This one hit home because I have this same gen r1 and my motor blew and you have inspired me to motor swap it myself. Hard part is finding a decent parts bike or motor. Also where do you find most of your leads to buy the wrecked bikes you have? Also are they salvaged titles?
Any giveaways for this bike
How did you get a free tank????
Always love seeing someone who doesn’t know how parts actually work together so they replace plugs when I bike dies out from throttle. Or greasing an axle thinking that it needs greased, give me a good chuckle
How much is the final price I want to buy
😍 my dream bike r1 Yamaha 1000cc
my best projest!
You are missing the mirrors. Other then that, it looks awesome
11:30-11:35 Lmaooo, so I’m guessing that the right side fairing never aligns properly with headlight faring i have the same thing with my 04 R1 😂😂 at least it’s good to know im not the only one
those damn tiny little tabs at the top of the fairing bend on older ones and never sit correct, then trying to do origami under the front nose with all the plastics. LOL
I’m interested in the R1 how much
My bike has a crank but no start, and i feel like if i saw this video before i sent it to the shop, I could’ve saved a lot of money
not sure if someone has asked this already but how do you know so much about bikes. Do you look at specs and handbooks or did you go to school? A good lengthily QA video would be cool
Here you go Jonathan! th-cam.com/video/hLkrmomoPbk/w-d-xo.html
@@RKMotorsports thanks man!
Oh yeah!
Linda moto, ótimo trabalho!
Akhirnya yg di tunggu2
It would be brilliant if you slowed the video down when fitting everything in place.speed it up again when tightening the the nuts and bolts....we are missing out on crucial peices of your what could be excellent video. Thanks
If anyone would like to buy a bike that you rebuilt, how would we go about that ? I’ve been so curious ?
pitty you didn't do a step by step video on fairing install there's a lot of tricky panels and clips that need to be done in a special order and soon as it went in fast forward of the important bits i new i was watching the wrong video heading. back to the jigsaw puzzle or another video dam it, i didn't remove them the previous owner did. thanks anyway got a couple of clues from it.
Who's the kid on your video 😁
Dude how much are you selling therefore
Auctmart has always gotten me great fairings. Bike looks great! Was that a aftermarket headlight stay bracket? If so what brand? I got one off Amazon and it didn’t fit at all lol
Yes it's an aftermarket stay bracket I got off of ebay. I'm pretty sure all of the aftermarket ones are the same
How are you going to sale your R1 bike for.
Thought the only Exhaust you could put on a R1 was Toce? lol
Harika bir video olmuş:?
Saaaaweeet amigo!!
New plugs should have been part of the rebuild anyhow.
Saludos desde Bogotá Colombia un favor pon sustitulos en Español latino gracias
Gracias!
finally huh
❤❤
👍👍👍👍
Sheesh
🤟😎
Plz give it to me 🔥🔥🔥😍