Insane Aircraft Engines Sound That Will Shake Your Soul ▶ 1 🥶😱
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- Insane Aircraft Engines Sound That Will Shake Your Soul
Engines Name in this video ⬇️
▶ 1917 Clerget 9B Rotary-Radial Engine
▶ Pratt & Whitney R-985
▶ Pratt & Whitney R-4360
▶ CURTIS WRIGHT R-3350
▶ Lycoming R-680
▶ Rolls Royce Griffon Mk58
▶ Alvis Leonides nine-cylinder
▶ Rolls Royce V12 Merlin engine
▶ Curtiss Wright R1300
▶ Honeywell TPE 331- 10
▶ Gnome engine
▶ Allison V-1710
▶ OX-5 Engine
▶ Shvetsov ASh-62
▶ Pratt & Whitney R-2800
▶ Andy Lloyd Napier Engine
▶ Curtiss Wright R-2600
▶ Pratt & Whitney R1340
▶ PT-6 turbo prop engine
▶ Wright Cyclone R-1820
▶ RL10C X Prototype Engine
▶ RS-25 Engine
▶ Bristol Hercules Radial Engine
For any issue please contact us at 👇🏻
tticopyright311@gmail.com
![[[OFFICIAL MV]] เอิ้นขวัญให้อ้าย- อ๊ะอาย สกุณาพร | ค่ายเพลงเป็นหนึ่ง](http://i.ytimg.com/vi/83x6L3X3qh0/mqdefault.jpg)
Hearing the engines firing up and running was always the best part of the airshows I used to go to.
I worked on the R1300, R-200 and the R-4360 when I was in the Air Force back in '62-'66.
LOVED MY JOB!!
The R1300 never sounds "Right" to me, I remember hearing them in T28's at air shows....I am always thinking....Dead Mag? - LOL!
@@misters2837 I've got about 1200 hours in the T-28B and C as a test and cross country flight mech/E2P in VT-2, VT-6 and NARF Pensacola for 3 years in the late 60s. After volunteering with a group that rebuilt an 1820-86A for a resurrected B back in 2014, I got a ride in the finished bird with a retired navy pilot who had been an instructor at Whiting Field when I was there. I noticed a big difference in exhaust sound from what I remembered from the 60s - that smooth, almost deafening note at 52inHg was missing - still had good power though. I assume it came from the differences in new and old fuels - green 100/130 alkylate vs the original 1940s era leaded 115/140 purple that went away about 30 years ago and has only recently made a comeback. When supercharger HIGH was selected at 15,000 feet while climbing at a pretty good rate, it didn't give the same kick in the pants that I remembered, either. The old bird (whose every switch, lever, and gauge I can still visualize in total darkness) remains an impressive machine and needs no excuses in the presence of it's elder warbird brothers....
@@misters2837 Yes, the 9 cylinder radial engines with their 5/4 exhaust always sounded like they were missing on a cylinder. Only the high power runup rpm test knows for sure! But, the T-28Bs and T-28Cs that I flew in 1971 in VT-6 were equipped with the R-1820. The S-2C, C-1A, and Hu-16D were also equipped with the R-1820. Never heard of a R-1300. That must be the 7 cylinder engine in the T-28A that the Air Force flew.
@DavidParker-cf2km That Makes Sense NONE of them sound "RIGHT" the 5/4 9cyl B/C or the 7cyl A-Model! - They wanted you to always think there was something wrong with it! - They Sound like a V8 missing on 2 cylinders about 1 cylinder apart....so like Bang Bang Miss Bang Miss Bang Bang Bang.....I know, cuz I had a car that ran like that when I bought it! (Needed Tune Up!)
@donallen, thank you for your service during the not so cold Cold War. We were at or near SAC bases which had the B-36, C-124, KC-97 and KB-50. I remember that sound at takeoff, the drone when they flew high above us and the dishes rattling in the cabinets.
Kudos!!! to the people who restore, maintain and exhibit these fine engines for viewers to enjoy🎉❤
Yes indeed!
The P&W Wasp 18 cylinder engines were the marvel of design and engineering, and have such a great sound.
They were built about 5 miles from me in the East Hartford, CT "Headquarters" plant. What a campus they have/had over there. 600 acres I think, with their own airfield and buildings that go on and on. At the peak in the 80's that plant alone employed 60,000 people! (And they had several plants around the state!) Now, it's a sorry shadow of itself. Maybe 3500 people there, and only one other plant still going with a skeleton crew. Don't forget the SR71 Blackbird would not be what it was/is without Pratt solving the problem and coming up with a turbo/ram jet hybrid engine! Pure genius!
Official speed of Mach 3.2 but reports from pilots getting close to 4 with plenty of throttle left, at 80,000+ feet! It was the fuselage that couldn't handle the heat from the airspeed, not the engines holding it back! I listened to one story from pilot Brian Shule (sp?) who had to outrun a SAM shot at him (Process that for a second. LOL ) and throttled up, limits be damned...he said he tried to touch the canopy afterwards and couldn't because it was too hot...with gloves on!!
I love the guy running the engine in his front yard. I bet his neighbors love him too. I love air cooled engines no matter what they are in. The Rolls Royce Merlin and the Allison V12s are pretty bad ass too. That Curtis Wright R-1300 sounded like a galloping horse when it first fired off.
My dad had an aircraft parts business, I grew up around the Pratt Whitney engines, tore down lots of them while I was in high school!
My soul has been shaken. The early radials are so insane...think of them as the "out of the box" ultimate engineering design. I mean who who thought to do this? And it was like early 1900s.... I wonder if there's any brains out there today that could come up with such a radical application of power? Thanks for such a great collection of examples. Oh my that Wasp was beyond insane...look at it....look at the plumbing. Even the Soviet pieces are a work of art. And to think kids worked on these during WW2. I fear "some" kids today couldn't load a mechanical pencil.
Facts as stated above! (Love the Mechanical Pencil...)
Not only that, but they were designed without the help of any computer.
@@stirlingschmidt6325 You got that buddy. I talk about slide rules, vernier calipers and architect triangles and kids look at me like I'm from another world...and I am
Kids these days, eh? Quit your bullshit. As a "kid" that is quite mechanically and a bit electronically inclined I find your mindset quite rude. Kids that know about mechanical stuff haven't gone anywhere, you just have to get out of the social media bubble that is mostly populated by mechanically illiterate people. Besides, being mechanically illiterate is not a bad thing, everyone has their own hobbies and likes, and without all kinds of expertise the world wouldn't work.
@@netts2315 Well there Mr. Netts, the only thing I said wrong was that it should have been stated "some kids" (I just edited it) . I know a good amount of kids, like you, who are mechanically inclined and technically/electronically astute. Your comment about the "social media bubble ...populated by mechanically illiterate people" is spot on. I do watch a number of gifted kids working on complex stuff. Admittedly, I can do a very limited amount the higher tech cross-over of mechanical and computerized engineering. I had to learn computer mech/tech when I was in my mid-50s and am amazed how much I've learned to appreciate it over the last 20 years. Hopefully, "as a kid", you'll enjoy learning old and new things when you're in your 70s. Respectfully, Theo.
The Clerget 9B was a bit of a shock. So much spinning mass. No wonder those particular planes had so much precession.
Just getting it to run without shaking to bits is a triumph.
Hats off.
Totally! It's a delightful surprise around every corner.
If you listen - these engines don't like to idle. They lope in idle and run smoothly with throttle on.
It's because their cam profile is that of a street rod / drag car. These engines are made to cruise continuously at 75%.
if you have ever heard a spitfire or a mustang flying past live, then you know what the best ever sounding engines are, they are incredible.
There good. But in my opinion nothing beats the sound of the B25's. Those R-2600's are a deafening symphony!
It’s even better from the back seat of a P-51 Mustang, I used to maintain one, test flights were the best!
@@marcwesley8513 you lucky bugger, i would love to experience a flight in one.
@@marcwesley8513 This I can agree with. We keep one in working order at the local airfield here.
Many years ago in Sydney,Aust I took my 8 & 6yr old daughters to an airshow at Bankstown airport specifically to hear a Spitfire flypast.They're in their 40s' now but still remember it. My duty as a father was done that day !
Nice, music for engine lovers like me, particulary radial engines, for as a drummer I hear interesting rithmes when they are starting up cold.
Extremely inspiring. And thanks also for including the ssme rs 25 test in this collection, it has some unimaginable parameters in its design.
Значит мне не одному это казалось
These engines are pure art , The result of collaboration between designers , engineers and exceptional tradesmen.
And deep pockets for the fuel bill ⛽️ 💰 💰
Thanks for putting a couple of turboprops in there. 👍
Ahhhh .... music to my ears. Thx. TF
Bet the neighbors love having this guy run up aircraft engines in a residential area
My neighbors' kids make more noise than this.
I'd be mad if he didn't let me know when he was going to run it, so I could watch.
Reply: Its sound of the Freedom!
@@juhajuntunen2557 Nah... It's the sound of slavery to anyone actually paying attention.
I'd run right over there and....ask if he needs any help. LOL
Imagine putting your life in the hands of one of these engines … is at a whole other level.
Some fine pieces of engineering, for sure ! Love that sound of raw power.
As someone that was done quite a bit of work on P&W 1830's, it saddens me to see the air-cooled radials ran without some method of cooling them, as is the case with that R-3350 pulling power. Those back cylinders get hot very quickly without proper airflow. They won't last very long like that, and it's a shame to see them deliberately abused. If you can afford to own one of these expensive jewels, please take care of it!
@@LJ-gn2un what sort of cooling would one use? I mean it has a cut down prop that seems to be moving alot of air by itself. What other ways can you cool an air cooled radial on the ground?
Nevermind my dumbass is looking at wright r2600. My bad, lol.
Best engines piston or jet ever even today Rolls-Royce !
Best Aircraft Engines even today piston or Jet Rolls-Royce !
The Curtis Wright R3350 with the blower sounds truly badass!
OUTSTANDING!!!! Love it!!! Thank you for posting this video!
I'll bet the Clerget 9Bs neighbours just love it.
Imagine your house being downwind of that cloud of oil vapor coming the exhaust!
Best leaf blower in the street 😂
Best aircraft engine video EVER.
That RR Griffon sure is a beauty...
Best sounds I ever experienced -
#1 At the end of runway with a B-29 taking off.
#2 Riding in Ford Tri-Motor
#3 Going skydiving so I could get a ride in a Dehavilland Beaver
Amazing engineering that went into these engines of the day.
its hard to see some of these aircooled engines runn att full speed without propellers that give cooling, eaven if its just a short time its painfull.
These boys and their motor stands would make great neighbors
The Le Clerget is not a rotary-radial - it is a ROTARY full stop. The cylinders rotate around a fixed crankshaft. A radial has fixed cylinders and a rotating crankshaft. Ex-pilot here so I hope I know what I'n talking about - I've flown aircraft with radials and aircraft with liquid-cooled inlines but never a rotary.
The RR Griffon is a different engine to the Merlin which powered most Spitfires. The Griffon didn’t go into the Spitfire till about the Mk 24 which was nearly a different plane to the Spitfire. Also the US had trouble building aero engines big enough to be useful early on which is why the Merlin built under licence to RR was put into the Mustang. That is what made the Mustang the power house it turned out to be.
No counterrunning propellers on spitfires
@@andrslnks4804 No. I think the Sea Fury had contra rotating props, the Griffon in the model Mk 24 Spitfire I have built did not.
You haven't got a clue what you are talking about.
The first production Griffon powered Spitfire was the Mk XII. Quickly followed by the Mk XIV. No Sea Fury had counter rotating propellers..
There were Spitfires with counter rotating props, The Seafire Mk 47 is one for example.
Typical internet experts, clueless..
@@zero1zero184 Go for it mate.
I always thought and saw old ads in magazines that the P-51 had Allison engines in them. They are a similar design to the RR, were they licensed to build them under the Allison name or what was the deal?
My Uncle had a WWI trainer bi-plane. It had a huge Roll-Royce 12 cylinder radial engine on it. It was a monster. Had plenty of power to go up and have a shit load of fun in something that alone is a scary thought. I mean stick and pedal controls. The seats were nothing more than a couple pieces of play wood. The back seat can control the plane but also had what was called a "monkey strap attached to it. That was in case you fell out you pull yourself back in.
Only the best in safety equipment 👍😎✊
@@steven.h0629 😆😆😆. Safety 3rd. 🤪
"Roll-Royce 12 cylinder radial engine on it" No such animal.
@@wagonmaster1974 he was being sarcastic. 😀
RR never built a radial engine.
No such thing as an even cyl radial engine. 🤪
Would loved to have seen a Napier Sabre
gotta love those Giffon sounds, raw
Griffons
Loved your production, so well presented and ESPECIALLY well supported by intelligent, clear and properly phrased subtitles.
Those are works of art. And think of the tech they were using to make them.
That was awesome. Thanks!
WOOOW MAN !!
JUST 2 MINUTES LATER WHEN THE EXPLOSION OCCURRED , I JUMPED OF RIGHT 😂😂😂
ENGINEERING MARVELS .
👍👍👍
I still can’t believe radials came AFTER rotary engines..at least insofar as widespread usage.
The 985 to me is the Chevy 350 of radials, and prolly my favorite, even after working on larger ones. It was the first I maintained, on a Beech 18. Perfect engine on a perfect plane.
Oh wow, the 4360 sounded silky smooth and quiet at the first view from the front.
I’ve a better appreciation for the 680 now than when I did when I worked on one, as I didn’t particularly care for the Stinson it was bolted on to.
Geez, the Griffon sounds like silk. The Merlin was great, but I always thought it sounded like a zipper. The Griffon is, wow, amazing.
The 1710 is a favorite. Such an underrated, under developed American masterpiece. If only the USAAC wouldn’t have told Allison not to bother developing superchargers.
The TPE331-10 at 14:00 sounds like an angry demon trying to escape when it reaches full speed
I love it when someone uses water on a type B (Bravo) fuel fire instead of CO2.
Greetings from Ireland 🇮🇪,, thanks for a very enjoyable and interesting video, well done, my ears 👂 are ringing 😀
Glad you enjoyed it
Nothing like a multi bank radial under stress ❤
Amazing engine’s! The lefty’s would stroke out seeing this. I love it!
I am a far left wing guy, and I love this too, without a hint of shame.
Me too😎
Maybe because they all rotate counterclockwise, so a "stroke out" of joy?
@@asmundukkelberg8741 you know they were burning fossil fuels right?
@@asmundukkelberg8741maybe the designers of these engines were racisss too 😮
Nice work, some cool engines. 👍👍
I love this show!!! Keep on showing these engines and what they sound like!
It was the sound of those radials that made me become an aircraft mechanic. Music to my ears ( Up close I always wore ear protection )
all those people ready to get hammered
soul is indeed stable and never shook
How do you fuel a rotary engine that's revolving at the same speed as the propeller?, and how do the valves/rockers work with the added effect of inertia and centrifugal force? It's amazing they could do this over 100 years ago.
Love these huge engines, but by far the best part was a guy spraying a fuel fire with a crappy garden hose. Who has one of these engines and can't afford a CO2 fire extinguisher?
Very good 👍👍👍👍👍
My father worked at the Curtiss Wright plant in New Jersey after WWll.
Bless the aviators!!!
2:00 slight backfire
I can't get over the Clerget 9B, with the cylinder bank rotating around the crankshaft. Fascinating, and kind of weird, also, whether practical, or not. I read they had some tough takeoff problems, etc. because of the extreme gyroscopic effects of all that rotating mass.
1
Rotating the cylinders helped to cool them when they were on the ground hence they were able to get some good power from it without the engine overheating. Manufacturing air cooled cylinders with effective and efficient cooling fins was still quite a challenge at this time, a side effect as you say was the gyro effect on take off and in turns when flying. The other side efdect was that they were 2 strokes that used castor oil for lubrication, after flying a couple of hours ingesting those fumes you were cleaned in your bowels when you landed!
Es ist faszinierend, daß es so viele Faszinierte gibt, die es faszinierend finden, Maschinen zu starten, die nichts weiter machen, als sich zu drehen und manchmal in Flammen aufgehen, während sie sich drehen.
Faszinierender ist beinahe, daß es Faszinierte gibt, die sich etwa eine halbe Stunde lang ein Video ansehen, in dem Faszinierte die Dinge zum Drehen bringen.
Faszinierend, in der Tat.
It's fascinating that there are so many fascinated people who find it fascinating to start machines that do nothing but spin and sometimes burst into flames as they spin.
What's almost more fascinating is that there are fascinated people who will watch a video for half an hour or so of fascinated people making things spin.
Fascinating, indeed.
Yep - I watched it from start to finish
Fascinating !
I concur with your sentiments gentlemen
Looks like the Allison 1710 was the smoothest running engine there out of all these engines.
That first guy's neighbors must absolutely love him
2:55. Love that enclosure using a truck bed cap. Great idea.
Glad you like it!
That turbocharged curtiss wright 3350 sounds evil.
I wish the people operating the cameras wouldn't stand in line with the props -- even if the chances of a mishap are low.
Gotta love a radial at cruising speed
Love those rotary radials
Great hobby love to rebuild one in my back ysrd!!😊
Come on, don't play with them, put them in something
Heh.
Like your ass
I used to light a lot of things on fire when I was a kid inventing things, my Dad would always be mad at the stuff I ruined and the things I caught on fire had the fire department knowing my first name, stuntgirl
I worked on RC121Ds in the USAF in 1963&1964. AKA Super Constellations in the airline world. It was awesome and a little scary to sit in the co-pilots seat during run ups of a test run. The flame shooting out of the PRTs was like the afterburner on a jet !!
Connie's to me were one sexy airplane
@@jayjones6904 Yes "Connie" was a female name that applied when we enjoyed the very curvaceous, sexy profile of her slender "fuselage", those long lifting airfoils of her "wings" and wow did she have big "engines"
great video it will soon take off
0:29 Looks like it WAS a nice, quiet neighborhood. 🙂
None of these can beat the sound of a Merlin in full song!
By the way, many WW1 pilots got sick flying behind those Le Clergets and other early engines. The were lubricated with Castor oil!! 😱
Zero idea what ya do with these beautiful engines after ya start'em, watch and listen to them? I guess I'd just LOVE SITTIN THERE WITH THE THING 😊 and of course share it with ppl
Absolutely nothing like the sound of a round motor.
The R3350 also powered my favorite war bird...the A1 Skyraider.
Radials sure do burn a lot of oil
These old ingines remembers me about the the movie " THE FLIGHT OF THE PHOENIX " with James GARNER , Ernest BORGNINE , Hardy KRÜGER and many other. I love this movie.WILL THE INGINE START , OR NOT ? !
Great movie
The Clerget 9B rotating rotary engine in the Sopwith Camel generated so much gyroscopic force, left turns were slow and right turns were dangerously fast for inexperienced pilots, sometimes leading into an uncontrollable spin. But for an experienced pilot they were incredibly manoeuvrable, with pilots often choosing a 270 degree right turn in favour of a slower 90 degree left turn. The Royal Flying Corp said flying one would get you a cross, either a wooden cross, a red cross, or a Victoria cross!
glad you didnt gum it up with music like some dorks do. GREAT SOUND!
Well, 30 minutes and no german engine. Well done sir
Great job 👍
Thank you! Cheers!
Das hier, bei 15:14, ist der einzige Motor der am besten läuft. Ohne Nebengeräusche ausfallender Zündungen. Dieser Motor hat einen ruhigen satten gleichmäßigen Klang, siehe 15:23
Im Vergleich, wenn man das Laufgeräusch hier beim nächsten Motor hört, siehe 15:50 dann sagt man sich: "an dem Motor stimmt was nicht mit der Zündung" 15:50 Hier nochmal zum Vergleich zum perfekten Motor: 15:23
The greatest sound in aviation (airplane music if you will), are the compound radials on the DC6&7, and the Lockheed Connie series aircraft. Jets can't hold a candle to the beautiful sound of those great airliners of the past.
Great job
I love most engines, respect them, props- kind of scare me, but the power! Electric motors are great as well and the Diesel-electric, etc., it's amazing what we can do when we put our heads to use for something good! Classic Cars and Boat Engines get that, the power to move bug ships OMG! It's all just amazing to me.
nice job
Those engines on wheeled trailers. Flip those props around for the drive home. 😂😂
it does not work that way. it would still be pulling but with a lot less thrust.
@@12vibaba I know. I was being silly.
シリンダーが回るタイプの星形ロータリーエンジン初めて見た、落ち着いて考えると吸気排気のセクションをシリンダで共有出来るからシンプルでいいかもしれない。
A quick observation - you credit the R2600 to being used in the Douglas A26. In fact, the A26 used the P&W R2800.
Correct. R2800-79 or -81. One had Bendix mags and the other GE magnetos. I flew the A26 for years fighting fire with both dash numbers. A great engine. But it will quit cold if it doesn't have air, fuel or the master rod breaks. I had all three happen. Radials can let you down. The only people say a radial will never let you down never put enough hours in behind them.
You can't do justice to the sound of these machines in a recording, but it's a good attempt - or it may just be down to my headphones. Anyway, my father, grandfather and uncle used to fly and restore aircraft, and we went to a lot of aircraft gatherings - including the world's largest in Oshkosh, Wisconsin - so I've been up close with several of these engines. The sound of a big old radial engine will just shake your soul. My favorite plane to listen to has to be the Boeing B17 bomber; when all four engines are properly tuned, they really make beautiful music.
Fire up a radial engine in front of your house ? You can be my neighbor ! That’s gotta be a interesting oil system w/the cylinders rotating
I can't see how lubrication would ever work. Sure, the pistons are stationary, but how do you keep all the oil from eventually ending up in the valve covers?
Oil is in the fuel and enters the crankcase first , bit like a simple two-stroke , it travels through a port valve in the piston itself and is eventually spat out the exhaust valve at the top of the cylinder. They are still a four-stroke but the mixture in the crankcase is excessively rich so additional air is actually drawn back in through the exhaust valve before the compression stroke.
They used castor oil (ricinus) and fuel mixture for lubricant
@@glbor yea and in some cases it give the pilots the squits. 😏
@@glbor well, it worked great in model engines.
my neighbors would hate me if did this in the front yard lol
3:06 The roasted corncob 🤭
Outstanding
*Everyone’s Gangsta Till Avro-Vulcan Peaks Over The Horizon 💀*
18:02 his testo numbers just arised to unknown levels
The lack of vibration from these motors is astounding.
Awesome!!
Thank you! Cheers!
"Good" idea to run up and turn tu high RPM´s radial eingines without prop, so without any cooling ... OMG.
My thoughts exactly, gotta be no concern for cooling for air cooled engines
So true, yet even worse the poor counterweights inside those motors, no rotational weight on the prop-shaft is insane, damage is for sure in short order, even before the engine gets warm....
I can smell the fumes from where I'm sitting😂
7:43 - The British engine builders gauged power by how many hats they could blow off. The Rolls Royce Griffon was 3 hatspower, as nicely demonstrated.
Imagine living next door