How to use rosin when soldering
ฝัง
- เผยแพร่เมื่อ 20 มี.ค. 2020
- Hello friends, how is rosin used when soldering?
This is a very basic question when soldering, but someone asked me how to use it
Nowadays we rarely use rosin alone when soldering
Solder wire with rosin core is usually used,since the rosin of this solder wire is used as a flux, it is easy to solder.
But when we solder, we always hang the solder on the tip of the soldering iron, and then touch the solder joint,because the rosin on the iron tip has evaporated at high temperature.
Without the role of flux, solder cannot be tinned or cold welding may occur.at this time, you can dip the soldering iron tip into the rosin and quickly apply it to the solder joint,this makes it easy to solder.
When soldering the wires, you can first heat the wires in rosin,then tin the soldering iron tip and you can solder the wires.
If it's on a circuit board,Can put rosin powder on the solder joint
Another method is to dissolve rosin in alcohol.
If you like my videos, please don't forget to subscribe to my channel.
---------------------------------------------------------------------------------------------------------------------------------------------
About Apour Maker Channel:
This channel is all about DIY, How To, Home Made, Great Ideas, simple, funny and entertainment.
---------------------------------------------------------------------------------------------------------------------------------------------
Music:
Advertising by Rafael Krux
Artist: / rafaelkrux - แนวปฏิบัติและการใช้ชีวิต
I am just getting started with learning electronics.
I just received my beginner kit and it has a small round plastic tub of "soldering paste" but I had no idea what it was for.
Eventually i discovered it is supposed to be a tub of flux/rosin, but i had no idea how to use it.
This was very useful.
I've been guessing how to use the solid rosin ... 'cos youtube clips usually show the usage of gel/liquid flux. Thanks for the tip!!
I was here for the same thing...didn't know that you can use the solid flux like that
Same here, thanks! All I see is the paste
Very educational! Information is still very valued in 2023!
You have no idea how long I've been looking for a way to use those little cartons of rosin flux.
Good video very informative.
Your comment makes me happy, thank you!☺
You not the only one bro, i bought i 2, but end up dont know how to use it, till this video came up,🤣
Me too!
Thanks for taking the time to share this with us!
Simple, short, clear and excellent.
Thanks for the info! I just started learning how to solder and my Uncle let me borrow his iron and some rosin core solder. I wasn't sure if I needed flux or not.
Thank you for this vid! I ordered a soldering kit and it came with one of these rosins, so I wondered how to use it. Guess I do now!
Thanks so much for sharing this! I subscribed. The video was very helpful in understanding solid rosin. I’ve usually heard people call it flux. I use this same material when I am soldering, but I didn’t realize that it had other names!
So that's how to use it. I've been looking for it for ages!
Solid rosin stone can be stored for a long time and cheap while gel flux sometimes gets bad overtime.
NiceNiceNiceNiceNiceNiceNice
Me too
perfect clean and comprehensive!
Finally my searching ends here! Thanks!😍😍😍
mine too! hahahaahaha
Same here
I almost threw it, thank god I was curious to google it and here i am. Thank you for posting this dad. I appreciate it.
I threw away the rosin that came with a cheap soldering iron thinking it was bad, as it was solid.... My bad I guess
Lol your thinking or assuming is what should have been thrown out!
same here 😄
Hahaha same
This type of rosin is really bad,.. harder to use and clean.. just get a good flux that specially formulated for soldering, they came in a paste or liquid form.
I do same like you
There’s a reason professionals use commercially-manufactured flux: it works better than pure rosin. Fluxes contain activators in addition to the rosin, which make them far more active (capable of cutting through more severe oxidation). I made rosin-in-alcohol flux once, and while it’s better than nothing, it doesn’t come close to real flux. I use it for one thing only: to create a protective coating on freshly-etched (homemade) PCBs. The rosin coating prevents oxidation and doesn’t need to be removed before soldering.
Very very helpful. Thank you very much!
Thank you so much! I guess my iron was just way too hot, as I ended up burning off most of the rosin and then wondering why the solder was all crumbly and staying on top 😅
Simple and good I will review this again before I start soldering
This is so helpful, thank you!!
Ive had this for years and finally used google translation on the packaging 🤣 i had flux this whole time thanx for the video
Thanks, I really needed a video like this 🎉
Just learnt loads thanks mate gonna subscribe right now👍
That smell from rosin😍 I love it too much.
Oooh. So its the smell of evaporating rosin and not the lead itself? or is it?
Well that answered my questions thoroughly
Good Job, thanks.
Good work Bro...
No talking but easy to understand, informative. Much better than "some youtubers" put title and description in ENglish, but talking so much sht in other language which I can't understand.
thanks for the video
Ty I didn't know how to use that I thought paste was better I am lucky that saw that video before throwing it away!
Mixing it with alcohol seems a good alternative. When using rosin alone, I always have to be quick when moving the soldering iron, otherwise the rosin just evaporates.
Great channel
Thanks very much!
Superb. Thanks.
thanks, you have answered my question about the thing. What kind of alcohol did you use?
Thanks
Thanks bro
thanks
this helps, i was wondering how to use the solid type rosin. because every youtube video is using a paste-like flux
thanks sir
..thank you..
簡單明瞭
謝謝
How long does the rising core cool after soldering?
Thank you. this is cheaper than solder paste
So, I can just that metal string @0:17 right? I had a little white battery connector come loose from the circuit of my cordless phone. Didn't break just came loose.
What's the difference between rosin and soldering paste ?
老師教我的叫做"松香"!
不曉得跟你說的" 鬆香 "有沒有一樣?!
I learn new resin +alcohol BUT WHAT ABOUT resin +light acid???
THANK U GOOD TO learn
不好施工的位置就改用 針筒 松香、錫漿
What kind of alcohol brother?
Pest is good
记得八十年代是 自己描线路板，再用硫酸铜腐蚀板子，再清洗。刷上一层松香水。
Can I use white spirit? It dissolves wood sap/resin.
White spirit is a petroleum product and has an oily residue. Oil is bad for soldering. Use isopropyl alcohol.
Title of the background song?
What if I simply dump the wire tip into the solder paste AND THEN get the soldering iron in contact with the flux'ed wire?
You can do that.
When dissolving rosin in Alcohol, is there a particular ratio to follow?
👍👍👍👍👍👍
👏👏👏👍👍👍
Hii and thank you for useful information
Please can you tell me how to remove excess resin from electronic board after
soldering ??
To use alcohol?? or how?
use a solder wick, or make your own by twisting and pressing strained copper wire
Use isopropanol
Hey Apour Maker is the "High Alcohol" like a higher strength than what is normally available for off the shelf purchase?
Yes, I use a concentration of 95% of medical alcohol.
@@apourmaker6055 Isopropanol
酒精是什麼的酒精
th-cam.com/video/aLv-l7RhxFE/w-d-xo.html
You are NOT supposed to "carry" solder from the iron to the work. You are supposed to heat the point or wire you are going to solder with the iron and then put the solder to it.
Sometimes the component being soldered doesn't take kindly to being heated. Everything has its place!
this isn't always true
Of course you can.
it's funny i gather rosin for fun and have been doing so since i was young. i was going to make incense with it.
Can I use hand sanitizer for it?
I thought I was doing something wrong when I would chip it off and put it on PCB. Well, I guess not then.
I think I should buy flux paste instead.
Is it works on aluminium foil?
It can't
why is alcohol used with the rosin
i thought i bought the wrong one... so thats how u use it
Same here!
what type of alcohol used? is it rubbing alcohol?
Yes, medical rubbing alcohol. The higher the concentration, the better
@@apourmaker6055 thanks sir
@@apourmaker6055 take care some rubbing alcohol contains oil
@@gerrywoody4301 medical ones doesn't contain oils
i put my solder iron in rosin flux and my solder iron stopped working.. it fails to heat up. sigh
I just use it as a hot dip lmao
I can smell the rosin through the screen.
Ah, so I wouldn't use this to folder the charging port of my phone?
Thank you thank you thank you THANNNNK YOUUUUU!! first off....I'm an idiot. You know.....typical guy....plan of action....let's get this done....what's this Flux Rosin crap!? Don't need this (throws it over my shoulder and dives right into my work) 2 weeks later I'm sitting here...wondering why my connections keep fracturing or breaking off all together!??? 🤷♂️🤷♂️ and yet again....typical male....it must be the cheap sh!ty Soldering equipment I bought...so again....typical man....I break out the credit car....cuz I can write this off as an "investment into my future." I pay the $1700 bucks to Amazon and even got the overnight shipping....cuz I'm SERIOUS NOW! The next morning I go check and there it is....what a beauty! I start taking everything out of the box and would you look at that....this time they put a big old tub of this Rosin crap in here......well......since I spent all that money on this thing....let's go on TH-cam and see what the cults of personality say!?......first video to pop up.....yours......half way threw the video....I'm looking over my shoulder at my own house just to check and make sure no one else is seeing how incredibly STUPID I AM!!!!
Now I'm commenting on your video to tell millions complete strangers of how stupid I am....but hey.....you don't have to be like me....but you probably will and you're probably reading this comment laughing cuz you did the same damn thing I did....""What's this Rosin crap, don't need this!!!!"" As a proud member of the male species I must defend my actions in saying that....at least I corrected my ignorance and I won't make this mistake again....well.....while Soldering that is!!! ............
opens box of this new insanely expensive DIY At home Build your own Extreme LOW TEMP Quantum Computing ..... THING.....that's as big as my refrigerator and cost almost as much as my house did........hmmmm.....what's this......USER MANUAL.....WARNING.....must read instructions fully and......this is stupid.....I don't need this......(throws user manual over shoulder)
Where was I....oh yeah! Thanks again for posting the video! I appreciate the level up
.....hey look at that.....
Woa....that's weird....there's a black tunnel in my garage that just appeared out thin air.....
I didn't know there were.....
who's that!!???
Woa......is that me......what? That guy looks just like me .....woa.....he's waving at me and copying everything I do....at the same time......this is soooo weird....
What does this button do?
💥
I watched over a minute of this video before i was certain it was not weed related...
The music aaaaasggggghhhh
Nice vlog po Ito pinapanuod ko video nyo ngaun po pa hug Naman po sa bahay ko po 🙏🙏🙏🙏
转移焊接是不对的。这是一个错误的示范。😄
Transfer soldering is wrong. This is a wrong demonstration.😄
MuteTube. Worthless. Easier to watch a video with narrations instead of trying to read and look up at the video.
Why in hell are you dipping your soldering iron in the flux... People will think that's the way to go.
How else to heat/soften the hard resin?
@@denmikseb Take a small and cheap paint brush and dip it into the flux to "paint" it on the component you want to solder. Your soldering iron should already have it's tip tinned. If it isn't, buy a tip tinner.
Putting the soldering iron directly on the flux will just evaporate a whole lot of it for nothing as it wont stick on your soldering iron (or very badly due to the high temp).
Flux should be pre-applied on components, not transfered from you hot iron tip.
@@MrFloyd4 pls can u make a video about that method, I wondering how to dip the wire to the flux as it is hard, soldering it and dip the wire together is what I use know after watching several videos on youtube
@@denmikseb Dipping the iron tip in resin cleans away residues on the iron tip, but remember to apply resin to the area you want to solder with a plastic strip, or paint brush.
Earlier today, I 'Dislike'd a video for having no narrative and irritating music. You saved this one with good subtitles, but narration is definitely recommended. (If you really don't like the sound of your own voice get a friend or relative to narrate it for you, but don't use a voice synth, for they are the path to the dark side.)
Sorry, thumbs down. You are making me read. while, I am trying to watch the demonstration. It’s too fast. It’s too much. Dumb it down. Talk me through it. Ditch the music. No disrespect meant. Just some advice from a professional teacher.
Well ur soldering was awful
upload your video dude, i want to watch
I FARTED!