I just picked up my first long bed 720. And most of the nissan engines are way to expensive. So I figured a 3sgte but it would be difficult to fab it up but a beams motor and Trans and harness is like 2k
It’s a company called one gauge you can buy a complete setup or piece it together from the website and buy you own sensors it explains it all on the website.
Hi Justin, yeah it depends if he has a 620 or not might be different on other models. But on the 620, the engine and trans are a tight fit so we had to lower the engine down as far as possible the clear the trans tunnel and we also had to cut out the crossmember for the torsion bars to get the trans to fit. So we had to make a new one so by doing that I had to go with coil overs for the front suspension not sure if that would be the case in his truck could possibly get away with trimming it down but other than that pretty straightforward just make mounts for it set it in and wire it up, new driveshaft not to bad.
Damn what’s your issue, can I see how you built your 620? People are always going to hate when they can’t accomplish what you have accomplished. Just means you’re doing a good job 👍 👏 keep up the great work truck looks sick AF!!!!
@@buildfocused No, but I have an 89 F-250 7.3L IDI. That I'm rebuilding original. It should be serious prison time to mod an old and or classic vehicle. All he did was trash a good looking light duty pickup. Which will probably be found abandoned somewhere. While their are people that can't so they complain I'm not one. I'm a do it original or if you do mod. Mod it with parts found within a ten year period of the vehicle. If you yer not gonna do that then sell it to someone that will instead of making it into hot garbage.
@@timesthree5757 yeah that’s garbage, it’ll probably runaway at one point and probably beat up shit box too. But that’s what you like, and I can respect that unlike you. If you haven’t looked around, everyone is doing resto-mods it just makes for a better and more reliable vehicle. Anyways who cares about keeping original it’s not like it’s a one off truck the needs to be kept pure of it’s originality. Plus basically almost every 620 owner has a swap in theirs lol. What’s the point of a swap if you’re just doing a engine 5 or ten years newer thats basically the same thing. Might as well just keep it original then, anyhow I’m done with my ramble toodle-Loo 🤙
@@buildfocused ok so if everybody jumps off cliffs you will too. IDI'S don't run away. Reliable? Those vehicles were as reliable as you can get. More reliable than modern engines today. There are plenty of power mods from that time period. Lastly this jackass just ruined the value of the vehicle.
Did you have to modify anything regarding the oil pan?
Awesome work!! Such a nice clean job! The wiring and custom work looked difficult but you did it. Sick set up.
Appreciate it! We try to do all our work clean and professional, more coming soon!
Dope ass lil 620 ….i love it!!!
Thanks bro! Definitely a fun little truck !
late to the datsun build but do you plan on blacking out the "datsun" on the back?
Hey man better late than never. As for now we don’t plan on blacking it out.
Super nice little Datsun..
👍😎👍😎👍😎👍😎👍
thanks bro I see that blue datsun! 👀
th-cam.com/video/GkOvSe2jhUI/w-d-xo.html
I just picked up my first long bed 720. And most of the nissan engines are way to expensive. So I figured a 3sgte but it would be difficult to fab it up but a beams motor and Trans and harness is like 2k
Yeah when we first picked up this beams about 2 years ago they were much cheaper, now they’ve gone up alot along with everything else!
any chance you can tell me where u got the headlights
eBay there’s multiple designs or just like these. They’re like 100 for all 4.
How does the transmission connect to the driveshaft? Is it custom?
Yes, custom driveshaft had to be made to adapt the beams transmission to the Datsun differential.
Next mod, a vacuum
Lmaoo still haven’t done that, appreciate it tho brotha! 🙌
Sick ass truck though 💪🏽
appreciate it bro fr ‼️🫡
What lcd screen is that for the speedo please
It’s a one gauge digital dash.
I'm curious if the intake is good. was looking at the same one but was worried about it at the same time
So far haven’t had any issues with it!
Bro that truck is dope !
thanks bro more coming soon!
How much did it cost to build all of it? Because I am about to get one and just wanted an estimate.
Roughly, to be built like this one everything redone 10k plus if you do the work yourself.
Very clean and nice looking truck good work on the truck 💯👌
Thanks bro 👍
@@ErikRose_ yessir
Love your engine work bro.. awesome combo 😎👍🏾🇵🇭🇺🇸
Appreciate it! thanks for checking it out! ✊🙌
What did you use for dash screen? I need something for my 1980 Datsun 720 ?
It’s a company called one gauge you can buy a complete setup or piece it together from the website and buy you own sensors it explains it all on the website.
Wat car did the seats came out off
99 Honda crv
Very cool!
Appreciate it more mods coming soon !
Sick 620 bro
Appreciate it! 🙌
Hi Eric. Got a friend planning to swap a Beams engine to a Nissan Datsun pickup. Any recommendations?
Hi Justin, yeah it depends if he has a 620 or not might be different on other models. But on the 620, the engine and trans are a tight fit so we had to lower the engine down as far as possible the clear the trans tunnel and we also had to cut out the crossmember for the torsion bars to get the trans to fit. So we had to make a new one so by doing that I had to go with coil overs for the front suspension not sure if that would be the case in his truck could possibly get away with trimming it down but other than that pretty straightforward just make mounts for it set it in and wire it up, new driveshaft not to bad.
@@ErikRose_ well he's got a 1992 nissan D21. Trying to fit in a Yamaha Gen 4 engine from the Toyota Altezza with a manual Trans
Awesome 🙌
Good to see it on the road💯🔥
Yes finally! cant wait to get more clips of it 🙌
Good job & everything looks great, excepts for the rims
Appreciate it bro 👍, yeah that’s one other thing that needs to be addressed. Soon!!
Can't wait to see it with some first rate wheel's 😍beauty of a truck
Appreciate it!! looking to get wheels sometime soon, will definitely post a video when that time comes! 🤟
K motor es
el motor se llama “Beams” pero son de Japon solamente
builds car, starts car. let it warm, and rip it while you not knowing how the car behaves.... bravo.. you got yourself a darwin award
yessir! no garage princesses here! we build to have fun with them !
@@ErikRose_ meh, i rather have longer fun with it instead of hugging a tree with it in the first miles.
@@henkdekul2379 fair enough still take well care of them though! 🤝
Db☺
Very nice 👍
Check out my 521 can’t wait to see it run like your 620.. nice job guys 👏👏
Nice I will check it out! Appreciate it, it would be nice to see another build! 🤟
Dhtht😶
It looking like shit. It sounds like shit, you got rubber bands has tires, you cut the shifter, also the driver doesn't know how to work the clutch.
who made you mad bro 😂 appreciate it tho my guy ! 🫡
Damn what’s your issue, can I see how you built your 620? People are always going to hate when they can’t accomplish what you have accomplished. Just means you’re doing a good job 👍 👏 keep up the great work truck looks sick AF!!!!
@@buildfocused No, but I have an 89 F-250 7.3L IDI. That I'm rebuilding original. It should be serious prison time to mod an old and or classic vehicle. All he did was trash a good looking light duty pickup. Which will probably be found abandoned somewhere.
While their are people that can't so they complain I'm not one. I'm a do it original or if you do mod. Mod it with parts found within a ten year period of the vehicle. If you yer not gonna do that then sell it to someone that will instead of making it into hot garbage.
@@timesthree5757 yeah that’s garbage, it’ll probably runaway at one point and probably beat up shit box too. But that’s what you like, and I can respect that unlike you. If you haven’t looked around, everyone is doing resto-mods it just makes for a better and more reliable vehicle. Anyways who cares about keeping original it’s not like it’s a one off truck the needs to be kept pure of it’s originality. Plus basically almost every 620 owner has a swap in theirs lol. What’s the point of a swap if you’re just doing a engine 5 or ten years newer thats basically the same thing. Might as well just keep it original then, anyhow I’m done with my ramble toodle-Loo 🤙
@@buildfocused ok so if everybody jumps off cliffs you will too.
IDI'S don't run away.
Reliable? Those vehicles were as reliable as you can get. More reliable than modern engines today. There are plenty of power mods from that time period. Lastly this jackass just ruined the value of the vehicle.