Knock it off! Your radio waves traveled through time and reached a model T-800 “Arnold” terminator! We always knew Amateur radio operators were dangerous! ‘73s 😊
Yeah at night you don't have that d-layer absorption because we're facing away from the Sun I was able to get two qso's last night about 1:00 a.m. East Coast one in Italy and one in Luxembourg
If I'm looking at this correctly, your SWR is way out of whack... hitting the ∞ whenever you're transmitting. What does it show when you do an SWR scan, and what is your antenna tuned for?
@@KN4YEM Are you checking the SWR at the frequency you're transmitting on, right before and not touching anything else? Also trying the ATU might help show other issues. with an SWR in the red or out of scope, like you're showing... You won't get out.
QSL , plus that noise level's insane, and yes depending on propagation in your area. Is your antenna close to a transformer, plus how high is it? Sorry, I'm off to work so I'll check back later this evening. 73's
Alsoa why are u running your decoder ... Also u have your compression turned off .. and your settings on the digital filter are all set up wrong ... Id be glad to sgow u areound the radio .. i inow g-90 in and.out
Knock it off! Your radio waves traveled through time and reached a model T-800 “Arnold” terminator! We always knew Amateur radio operators were dangerous! ‘73s 😊
Thank You.
Lol
"Kilo"
Your SWR was maxed, hit the tuner… maybe it will help it out.
Yeah at night you don't have that d-layer absorption because we're facing away from the Sun I was able to get two qso's last night about 1:00 a.m. East Coast one in Italy and one in Luxembourg
Oh Nice, Congrats on your contacts
If I'm looking at this correctly, your SWR is way out of whack... hitting the ∞ whenever you're transmitting.
What does it show when you do an SWR scan, and what is your antenna tuned for?
I know right I swept the band and all SWR good.
@@KN4YEM Are you checking the SWR at the frequency you're transmitting on, right before and not touching anything else?
Also trying the ATU might help show other issues. with an SWR in the red or out of scope, like you're showing... You won't get out.
QSL , plus that noise level's insane, and yes depending on propagation in your area. Is your antenna close to a transformer, plus how high is it? Sorry, I'm off to work so I'll check back later this evening. 73's
Thanks for responding to the video. I do have that inside it's the furnace and stuff.
Cool.
Thank You
Set your compression and mic gain a little higher and make sure your alc doesn’t get into the red.
Okay well do Thanks.
ALC is in green read out
Alsoa why are u running your decoder ... Also u have your compression turned off .. and your settings on the digital filter are all set up wrong ... Id be glad to sgow u areound the radio .. i inow g-90 in and.out
Thanks for your Reply. I didn't turn off the CW DECODER. Too much compression will make your modulation distorted.
Your ur vswr is burried ... The output of transmitter is cut back because u have a infinity vswr what are u doung to thay poor radio
Thank You for your Reply. I'm using a amplifier so the radio is Dead keying 5W so for this radio the modulation is low.
Just uploaded a video brother check it out.
Dude look at your swr meter it's buried full scale bad bad bad bad bad bad bad