This is such a great aircraft. I've had mine over a year now. I've only flown it on 3s. (1000mh) fits perfectly in that slot upfront and cg is perfect. I really really think you should try it. It's beyond fun!! Great video as always Brian!
We need more planes in the UMX to 800mm range so we can fly on the days we can't make it to the club with our 1200mm and up beauties. Great video you two, I just received my Arrows RC 50mm Viper that I ordered with your HobbyZone link and I can't wait to maiden it.
Love the FMS 800mm warbirds! I have both the Corsair and mustang. I use a 3s 1300 in both. I even threw 2.5 inch dubros rigged to coat hangers as landing gear on my mustang and it works nicely. I also threw a 30amp avian in both. Have over 50 flights with no over heating or any issues with cg. I have been waiting for you to review these warbirds. Awesome! Ps. 6 channels with flaperons is pretty fun to play with on these.
I added flaps to my 800mm corsair and it's friggin awesome! I'm a little weary about ripping the cowl off to slap an Avian 30amp in it. Did you have any trouble with the corsair cowl while replacing the ESC? I haven't been able to find any mounting screws on it. So, I'm assuming I'll be breaking out the China glue for this one. 👍
@@AL-RCjunkie the cowl has double sided tape holding it. The motor mount has set screws. You don’t need to remove anything but the cowl and pull the esc wires towards the front. I made connectors to step down the esc leads to the motor leads. It’s much easier to make adapters than solder new ones to the motor or esc. I have used a lot of hot glue to fix this plane and it was even completely broken in half at one point. She still flys like a dream if not better. The motor handles the extra power without issue.
@@nmfishdude200 Hell yeah! Thanks for the tips! Can’t wait for the next rainy day to tear into this little beast. It’s the only plane I don’t have telemetry on. So, I’m stoked to fly her while dust collects on my little Lipo alarm 😊👍
Tip from more than 10 years ago: (Not my idea.) You can put a skewer through the outside of the plane right by the rescue sticker, in through the "tab" on the bottom of the canopy and halfway into the other side of the fuselage. The canopy won't come up with the skewer in place. The skewer is easy to remove/install. You can store it the hole you made through the canopy when the canopy is off so you don't lose it. The only thing you see from the outside is the little bit of skewer you leave sticking out and you can paint it to match the plane.
@@BrianPhillipsRC It's kind of annoying that the 800mm FMS T-28 has had this canopy "problem" for as long as it has been around (at least 12 years - mine is from 2011) and the current plane is essentialy identical to the original except they improved the foam and added more detail to the landing gear. How hard is it to source a better magnet?
Just ordered this through your website. I cant wait to flap mod it. Ive been flying the 800mm corsair on the 800mAh 3s packs (JST) and it CGs out perfect. Super light. Really great flyer. 5 or 6 mins of flight time. And i can charge em on in my car with the little S-55 on an inverter. Can fly till my legs give out. Or some dog walker parks in the runway (soccer field parking lot😊) Cant wait to get it! 👍
That Plane will fly 3s in stock form all day long Brian i know cause ive have flown mine on it for 3 years now with still has perfect performance. 1000mh 3s is the ticket
@@mikewilson5944 Brian would put flaps on a plane the size of a mosquito...the insect not the warbird...i fly n land mine into the wind to slow it down instead.
These are on sale now @ $135.00 with the reflex. Just ordered one to go with my P-51, might be a pre black Friday special from one of the online hobby shops.
These FMS 800mm series warbirds are great. I have Fw-190, Spitfire and A6M zero. I ones had P-40 and P-47. It's sad that FMS stopped manufacturing many of the old models. I fly mine usually on 3S 800mah-1300mah battery. Greetings from Finland!
Both coming soon. The power lines came down TODAY!!!! They are GONE ;) Pole and wire down. They had 7X boom trucks working together today, and it was crazy, but I was at work...paying for all of it ;( I really wanted to see this process. They did the boring last week and week before, as well as setting the pads and 50 kV transformers. We will cover the install when it's all done, but for now, we are up and running on underground service!!! Now I just need to go earn $24,263 to pay for it...
It seems that the reflex changes the elevator at different throttle positions. I edited the reflex program so it wasn't quite so strong deflection. Any progress on the flaps yet? 😉😁
I wasn't aware of this, but must be in the AUTO-LEVELING mode, right? As for flaps mod - admittedly, we're backlogged so much, I haven't had time to do any mods ;( In fact, the backlog is WORSE now than it was then, so I don't know when I'll get them installed. Very sorry for the delay!
@@BrianPhillipsRC yes in auto leveling. If you have it turned on and hold the plane while going full throttle you can see it. I'm not sure why they think it needed it as when auto level isn't on it it doesn't try to go down at full throttle. The flaps can wait. Love to see more planes. Though I've been looking at so e of your really old videos lol. Huge improvement over the years 😁
LOL - Wish the rudder was a bit better on this beauty. She's a good flying plane, but I really want a wider flight envelope...thus my desire for flaps ;)
I used to do it almost 100% of the time, if that helps, but it's a pain, and I hated having to do it all the time. Once in a while it's no biggie...this plane would be worth changing over to an XT60 or EC3 or IC3
Hey Brian i bought the Tabu STS and i wonder if you could make a video of setting up the radio when you want to use your own and if it is possible to make reverse trust on that one also Thanks 😊
Quickly ;) If you want her to land slower, take a couple hours and cut in some flaps. You will LOVE how she slows down for you!!!!! BUTTT, in the mean time, FLY HER TO THE GROUND...don't stall her into the ground like bigger T-28's. This is hard if you're landing on a tight runway, but will generally work.
@@BrianPhillipsRC thanks! I’ve been trying to practice my landings but always get caught in ground effect when increasing angle of attack, and it keeps floating and lands 30 feet farther than where I want with the throttle cut. I think what your saying is to give it more down elevator?
Another great video. I have watched it a few times now while waiting for funds to buy my own. Now I have it I'm wondering when the flaps video will be coming?
Power lines are GONE TODAY!!! POLES AND ALL ;) Underground service started here at about 8:23 AM. They have some buttoning up to do, but otherwise, the line are gone ;)
Ok now I have a Dilemma I have the umx voodoo and love it. I have the trekker 1.2 and like it. Now I’m torn between this the FMS 800 p51 or the umx evolution 😳 love me a war bird
They promised us one, but I'm torn now...we want to help people along in their pursuit of the hobby, but if I get the iX14 or iX20, I wonder if I'll have a harder time teaching people HOW to use the NX8 or NX10 - seriously torn....I want the never and better tech, but I really only "need" the two additional channels, and we want to have proper and maximum reach, not just from a growth perspective in our channel, and small business, but to help more people get in the air. We really want to get people flying RC!
I just bought this plane I did three maiden flights went well last Saturday I wasn't lined up to the center line on our club's runway was just to the left side of the runway I was just about to touch on my main gear and tried to do a go around and I paid the price $38 dollars in parts new nose gear prop and cowl I think this plane is sluggish on 2s my HK-F4U 750mm corsair and my 800mm HK A1 Skyraider both have 20amp ESC's and they fly on 3s and i think i am going to make that change for this one as well
Well on behalf of all of use viewers Thanks for the Rc portion of your Life. Just hope your bosses at your day job don't get into Rc and see you online during business hours. Lol
Boy, your wife is great with that camera. I've tried to do that for friends at the field and I'm terrible at it. Where are you guys, anyway? You've got some gorgeous property, there.
I just sent out the official begging text message to my contact ;) LOL - Actually, they told me they were sending one back a few months or a year ago...so I've been kinda dying for one!
It does not. This a PNP withOUT Reflex, so you'll need to provide your own transmitter and receiver. Without the Reflex, we would recommend an AR630 or 631 if you want stabilization... bprc.me/AR630 bprc.me/AR631 In this video, we featured the NX8... bprc.me/NX8 But you could also get away with the new NX7e... bprc.me/NX7e Hope that helps!
You can always get a Reflex if you want to add it... bprc.me/FMS_Reflex Or you can used a stabilized RX like an AR630 or 631... bprc.me/AR630 bprc.me/AR631
Great video Brian and camera crew. I have one as well. I'd add more but I'd just be repeating everyone else :) :). AirHammer out!! Edit - IX14 is coming soon.
![KRK - ชนิสรา Ft.WanMai , N/A [Official MV] Prod. By Sakarin](http://i.ytimg.com/vi/C-WMwwYobcU/mqdefault.jpg)
A very thorough, practical and realistic review. Thank you.
800mm is an interesting size and if done right can give a great compact flying experience.
yes - totally!
Beautiful plane. Easy to see in the sky. Thanks for posting that bird.
You need this size. Would fit nice in your ship ;) Actually, we have a 980mm P-40 coming too, which would be right up your ally too!!!
This is such a great aircraft. I've had mine over a year now. I've only flown it on 3s. (1000mh) fits perfectly in that slot upfront and cg is perfect. I really really think you should try it. It's beyond fun!! Great video as always Brian!
1000mAh 3S? - That's a small 3S
@@BrianPhillipsRC ikr? But I still get 6-7min flights!
We need more planes in the UMX to 800mm range so we can fly on the days we can't make it to the club with our 1200mm and up beauties. Great video you two, I just received my Arrows RC 50mm Viper that I ordered with your HobbyZone link and I can't wait to maiden it.
true!
Love the FMS 800mm warbirds! I have both the Corsair and mustang. I use a 3s 1300 in both. I even threw 2.5 inch dubros rigged to coat hangers as landing gear on my mustang and it works nicely. I also threw a 30amp avian in both. Have over 50 flights with no over heating or any issues with cg. I have been waiting for you to review these warbirds. Awesome! Ps. 6 channels with flaperons is pretty fun to play with on these.
Very nice! Thanks for sharing NM FishDude
I added flaps to my 800mm corsair and it's friggin awesome! I'm a little weary about ripping the cowl off to slap an Avian 30amp in it. Did you have any trouble with the corsair cowl while replacing the ESC?
I haven't been able to find any mounting screws on it. So, I'm assuming I'll be breaking out the China glue for this one. 👍
@@AL-RCjunkie the cowl has double sided tape holding it. The motor mount has set screws. You don’t need to remove anything but the cowl and pull the esc wires towards the front. I made connectors to step down the esc leads to the motor leads. It’s much easier to make adapters than solder new ones to the motor or esc. I have used a lot of hot glue to fix this plane and it was even completely broken in half at one point. She still flys like a dream if not better. The motor handles the extra power without issue.
@@nmfishdude200
Hell yeah! Thanks for the tips!
Can’t wait for the next rainy day to tear into this little beast.
It’s the only plane I don’t have telemetry on. So, I’m stoked to fly her while dust collects on my little Lipo alarm 😊👍
Tip from more than 10 years ago: (Not my idea.) You can put a skewer through the outside of the plane right by the rescue sticker, in through the "tab" on the bottom of the canopy and halfway into the other side of the fuselage. The canopy won't come up with the skewer in place. The skewer is easy to remove/install. You can store it the hole you made through the canopy when the canopy is off so you don't lose it. The only thing you see from the outside is the little bit of skewer you leave sticking out and you can paint it to match the plane.
Not a bad idea! I've done similar, but didn't cross my mind in this application. Thanks
@@BrianPhillipsRC It's kind of annoying that the 800mm FMS T-28 has had this canopy "problem" for as long as it has been around (at least 12 years - mine is from 2011) and the current plane is essentialy identical to the original except they improved the foam and added more detail to the landing gear. How hard is it to source a better magnet?
Just ordered this through your website. I cant wait to flap mod it. Ive been flying the 800mm corsair on the 800mAh 3s packs (JST) and it CGs out perfect. Super light. Really great flyer. 5 or 6 mins of flight time. And i can charge em on in my car with the little S-55 on an inverter. Can fly till my legs give out. Or some dog walker parks in the runway (soccer field parking lot😊)
Cant wait to get it! 👍
Flaps will make it fly so much slower ;) Good call!
@@BrianPhillipsRC
Oh yeah!!! 👍
That Plane will fly 3s in stock form all day long Brian i know cause ive have flown mine on it for 3 years now with still has perfect performance. 1000mh 3s is the ticket
I agree. I fly mine on 3s no problem. It also doesn't need flaps imo. Great plane.
@@mikewilson5944 Brian would put flaps on a plane the size of a mosquito...the insect not the warbird...i fly n land mine into the wind to slow it down instead.
Mike - not a "need" thing, but I want to slow her down...more enjoyable for landings and takeoffs ;)
@@BrianPhillipsRC Yes it is a need thing you need an extra 30 feet on your runway Brian.... :)
Almost wants to make you be a morning person! You guys are fantastic! Love 💗 ya!😅 another great flight ✈️! Loving this Fms Trojan! #stayepic
These are on sale now @ $135.00 with the reflex. Just ordered one to go with my P-51, might be a pre black Friday special from one of the online hobby shops.
T28 bit.ly/3W4pyNA - NICE!!!
Is reflex basically safe from eflite?
@@chasep5936 yes, kind of they are both stablizers
I like the 800mm size. Thank you guys.
It's super cool, and I too love the small size!
Zippy Compact 1000mah 3s fit in there without no foam carving out.
I bet they would. Thanks James ;)
Got the whole 800 mm Fleet excellent airplanes from FMS...👍🤠
NICE ;)
These FMS 800mm series warbirds are great. I have Fw-190, Spitfire and A6M zero. I ones had P-40 and P-47. It's sad that FMS stopped manufacturing many of the old models. I fly mine usually on 3S 800mah-1300mah battery. Greetings from Finland!
I bet they'll start making some of them again, due to added popularity.
@@BrianPhillipsRC Let's hope so. 👍
Love those old Navy trainer planes!
me too
The ESC can handle 3S and even 4S. Sweetspot is 3S 800-1100mah jst packs.
Motor can handle it as well.
nice!!!
Power lines are still there...?!?! How about a tour of the solar panels? BTW the VANQUE pole saw works great.
Both coming soon. The power lines came down TODAY!!!! They are GONE ;) Pole and wire down. They had 7X boom trucks working together today, and it was crazy, but I was at work...paying for all of it ;( I really wanted to see this process. They did the boring last week and week before, as well as setting the pads and 50 kV transformers.
We will cover the install when it's all done, but for now, we are up and running on underground service!!!
Now I just need to go earn $24,263 to pay for it...
It seems that the reflex changes the elevator at different throttle positions. I edited the reflex program so it wasn't quite so strong deflection.
Any progress on the flaps yet? 😉😁
I wasn't aware of this, but must be in the AUTO-LEVELING mode, right?
As for flaps mod - admittedly, we're backlogged so much, I haven't had time to do any mods ;( In fact, the backlog is WORSE now than it was then, so I don't know when I'll get them installed. Very sorry for the delay!
@@BrianPhillipsRC yes in auto leveling. If you have it turned on and hold the plane while going full throttle you can see it. I'm not sure why they think it needed it as when auto level isn't on it it doesn't try to go down at full throttle.
The flaps can wait. Love to see more planes. Though I've been looking at so e of your really old videos lol. Huge improvement over the years 😁
How did you take out the elevator mix? In the .dll?
That IS a cool plane. Great informative video as usual .
thanks Joe!
great info and flying,cool plane
Thanks!
Looks like a good home for an avian 30A
Thrust reverse would be nice ;)
Did you find the servo connections to the elevator were loose? Like the pin was way too small for the hole, making a lot of play.
I'm really sorry, and should, but don't recall this detail off hand.
Brian the plane flys amazing inverted, you just have to trust your elevator skills.
LOL - Wish the rudder was a bit better on this beauty. She's a good flying plane, but I really want a wider flight envelope...thus my desire for flaps ;)
@@BrianPhillipsRC yeah I here you that would be nice might have to order another one and convert it.
Any thoughts on changing battery connectors. Everyone has a different way of soldering, like to see your method.
I used to do it almost 100% of the time, if that helps, but it's a pain, and I hated having to do it all the time. Once in a while it's no biggie...this plane would be worth changing over to an XT60 or EC3 or IC3
Hey Brian i bought the Tabu STS and i wonder if you could make a video of setting up the radio when you want to use your own and if it is possible to make reverse trust on that one also Thanks 😊
Any tips on landing this model? The wing loading is double of the 850 mm Ranger.
Quickly ;) If you want her to land slower, take a couple hours and cut in some flaps. You will LOVE how she slows down for you!!!!! BUTTT, in the mean time, FLY HER TO THE GROUND...don't stall her into the ground like bigger T-28's. This is hard if you're landing on a tight runway, but will generally work.
@@BrianPhillipsRC thanks! I’ve been trying to practice my landings but always get caught in ground effect when increasing angle of attack, and it keeps floating and lands 30 feet farther than where I want with the throttle cut. I think what your saying is to give it more down elevator?
Another great video. I have watched it a few times now while waiting for funds to buy my own. Now I have it I'm wondering when the flaps video will be coming?
Its a good plane i had one for a while but sold it and got the eflite 1100 T-28
This plane is a good plane, but inferior, mostly due to being smaller, than the 1.1m and 1.2m eflite.
Looks super fun! I'm still going to have to go with retracts! Also, any updates on the power lines?
Power lines are GONE TODAY!!! POLES AND ALL ;) Underground service started here at about 8:23 AM. They have some buttoning up to do, but otherwise, the line are gone ;)
@@BrianPhillipsRC PARTY!🎉🎈🎉🎯🎉🎈
Hello Brian,its Airplane my favourite😉😉😉😉🔝🔝🔝🔝🔝
It is super fun!
Ok now I have a Dilemma I have the umx voodoo and love it. I have the trekker 1.2 and like it. Now I’m torn between this the FMS 800 p51 or the umx evolution 😳 love me a war bird
Timber Evo 100% - while the little 800mm's are fun, they're not near as good flying.
bprc.me/Timber
You must have mashed the crap out of your thumb bro damn! Great aircraft and vid!
yes, but the nail is ALMOST grown back out.
Nice plane
🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
thanks!
This is off-topic, but do you plan in purchasingan iX14? If you will, do you plan on making videos about it?
They promised us one, but I'm torn now...we want to help people along in their pursuit of the hobby, but if I get the iX14 or iX20, I wonder if I'll have a harder time teaching people HOW to use the NX8 or NX10 - seriously torn....I want the never and better tech, but I really only "need" the two additional channels, and we want to have proper and maximum reach, not just from a growth perspective in our channel, and small business, but to help more people get in the air. We really want to get people flying RC!
Keep on Flying RC in the Free World !!!!!!!!!!!!!!!!!!!!!!!! Gotta go...my ship awaits me !!!!!!!!!!! up up and away!!!!!!!
Thanks Buck!
I just bought this plane I did three maiden flights went well last Saturday I wasn't lined up to the center line on our club's runway was just to the left side of the runway I was just about to touch on my main gear and tried to do a go around and I paid the price $38 dollars in parts new nose gear prop and cowl I think this plane is sluggish on 2s my HK-F4U 750mm corsair and my 800mm HK A1 Skyraider both have 20amp ESC's and they fly on 3s and i think i am going to make that change for this one as well
Brian, have you seen the Fair RC FMS t-28 800mm in yellow. It's a beautiful plane. Hope you can review it. 🙂
How many of these fms 800mm warbirds do you own brian
I think we have 3 so far...
ya for sure 3s is the way to go.. BTW Brian when do you work?
When? 24/7
Well on behalf of all of use viewers Thanks for the Rc portion of your Life. Just hope your bosses at your day job don't get into Rc and see you online during business hours. Lol
How did you get the CG in limits. I have an AR637T and a 2s 1300mAh and I'm really tail heavy with everything as forward as possible. Any suggestions?
$176 not bad. Be nice if it was a BNF for that price though 😁 Nice flying Brian 👍🏻✌🏻
With the Reflex V2, it's good, but I too agree BNF for this price point would be VERY GOOD.
Brian needs a new transmitter? IX12 review must be coming soon. 😉
Ix14
@@Archon-Luke IX12 was announced this morning
@@Archon-Luke My bad, IX14 it is
Yes, the IX14 - they told me about it maybe a year ago, but still waiting???? Radio Silence to date ;(
I hope you do the flap MOD I did it on the 1.1 so easy.
I have it on my list. Now to actually do it... We have so much piled up, I hope I don't get too distracted.
Is it better than the e-flite 1.1m t28 wich sucks imo
Nope...
This one flies great, but nothing as good as the 1.1m or 1.2m eflite.
Hey brian I was just wondering I also have this 800mm t-28 do you think that a 3s 850 li-po would work on this plane
3 S battery availble?
Boy, your wife is great with that camera. I've tried to do that for friends at the field and I'm terrible at it. Where are you guys, anyway? You've got some gorgeous property, there.
Thanks, and yes, Megan is amazing with the camera. We're in central Iowa, USA
Do a review on the new IX 14! 😊
Coming as soon as I have one ;)
They send you an ix14 yet?
I just sent out the official begging text message to my contact ;) LOL - Actually, they told me they were sending one back a few months or a year ago...so I've been kinda dying for one!
@@BrianPhillipsRC lol. Wont lie I want one. Dont need it I have an nx8 but...I want.
Hi Bryan , by any chancedo you have an Fms fw190 800mm to sell or at least the fuselage?
Is that one discontinued? We've never done an 800mm FW190, sorry!
@@BrianPhillipsRC yes it’s disconued
When you bought it, did it come with the controller?
It does not. This a PNP withOUT Reflex, so you'll need to provide your own transmitter and receiver. Without the Reflex, we would recommend an AR630 or 631 if you want stabilization...
bprc.me/AR630
bprc.me/AR631
In this video, we featured the NX8...
bprc.me/NX8
But you could also get away with the new NX7e...
bprc.me/NX7e
Hope that helps!
i love goin to the inside hole...
;)
Flaps, yes! And show the build too. Camera crew is THE best, not one of the best.
Thanks Jack, and want to get this done soon. I feel like lowering the stall speed would be a huge help for this plane.
Can’t get this in the states with the reflex. Boooooo only in Canada ehhhh!!!!
You can always get a Reflex if you want to add it...
bprc.me/FMS_Reflex
Or you can used a stabilized RX like an AR630 or 631...
bprc.me/AR630
bprc.me/AR631
Hello brian love your videos.would you like to sell your p-39 air cobra
Thanks Frankie, and selling my models is very hard for me.
Hey! I’m first! Looks like a great plane!!
Congrats :)
800 mah 3s I get 3 minutes to 11.4v
1500 mah 3s I get 5 minutes to 11.4v
Great video Brian and camera crew. I have one as well. I'd add more but I'd just be repeating everyone else :) :).
AirHammer out!!
Edit - IX14 is coming soon.
IX14 is gonna be epic. I can't wait to get my hands on one!!!
Want a cookie ? Lol
Sorry Joe, I have no idea - gotta time stamp this stuff so I know what you're talking about ;)
@@BrianPhillipsRC I was referring to the guy that posted that he was first to add a comment to your video.