🤣 man I like your style! You had me cracking up for real. Everything you were saying is exactly what goes on in my head while I’m working on stuff. You got a new sub here, even if it’s just for the commentary
I just did the same thing this week, but used blue rock lights mounted them on the screws T 10 for the panels right next to where you mounted your lights there about an inch and a half long plenty to go through the rock light and still mount the panel. I had fun, checking out the wires on that switch, the crazy wire you’re talking about actually gets power when the automatic lights is activated by the darkness and it stays on as long as it’s dark. It will also work with the door open activation, but it’s only on for about 30 seconds then shuts off. I then connected it to the same light as you did, and everything works great manual on and door, activation, or manual off.
Good tutorial, I would recommend RGB or LED strips though, easier to install and very bright. Only thing you have to do with those is decide how to hide the cables so it looks clean.
I like your style. I got a '14. The '14 and '15 have the cr*ppiest illumination inside and outside. Headlights stink as well. What was the GM engineers thinking. May have to do this to mine. Thanks for the hint. looks good.
Hello sir my names mark,just subscribed to your channel and checking out your videos,I like your videos cause you get straight to the point on how to do something,the other videos I watch to try to learn,they just wanna get fame and I really don’t learn anything,looking forward to following your diy videos,if you have any advise for me on what to do to my rig “1988 Chevy k1500 short bed single cab” I’m all ears bud,again thank you keep up the good work
Very Good! I’m running some into the doors themselves to help light shit up, I have no f-ing idea why chevy couldn’t do that. How many more lazy union & minority employees would it have taken? I would have said over paid but it depends on where your truck was built?
Great video, I agree these trucks dont have adequate lighting. Also these door sills may intrest you they use the same dome lights like you did, I doubt as bright but light up the same area. These videos show where you can tap in to the dome lights, Gray Wire at the BCM near the drivers feet, this would allow you to bypass running the wire from the top to the emergency brake since it's already near the emergency brake. Same guy installs some door handle llights too. th-cam.com/video/6vFuV9TAGZE/w-d-xo.html th-cam.com/video/CJiLdc1Sq30/w-d-xo.html
Amazing video. Thanks
🤣 man I like your style! You had me cracking up for real. Everything you were saying is exactly what goes on in my head while I’m working on stuff. You got a new sub here, even if it’s just for the commentary
im sure these videos take a lot of work to make, I really appreciate the time and effort you went through to make them! thank you!
The best tutorial video ever . Love your commentary
I used your wiring to hook up led bed lights to the bottom of my truck, when i open my door its daylight bright.you rock man.keep em comein....
Best thing I’ve seen all week. Thank you. Good idea. I can’t see a damn thing in my truck!
I just did the same thing this week, but used blue rock lights mounted them on the screws T 10 for the panels right next to where you mounted your lights there about an inch and a half long plenty to go through the rock light and still mount the panel.
I had fun, checking out the wires on that switch, the crazy wire you’re talking about actually gets power when the automatic lights is activated by the darkness and it stays on as long as it’s dark. It will also work with the door open activation, but it’s only on for about 30 seconds then shuts off.
I then connected it to the same light as you did, and everything works great manual on and door, activation, or manual off.
Like your humor! Not adding extra lights, but enjoyed the commentary.
I thoroughly enjoyed this video! Maybe it was more the commentary! I'd have you help me on a project any day!
Your sunglasses actually fit in your sunglass holder?! Lol
RIGHT! whats the deal with that ?
Sir, you need to make more videos. One very detailed. Two, the commentary is friggin great! Hahaha
Good tutorial, I would recommend RGB or LED strips though, easier to install and very bright. Only thing you have to do with those is decide how to hide the cables so it looks clean.
Dude your commentary is perfect.
You good brother it doesn't matter you did a great job I may try to do the same thing thanks for sharing 👍👌😊
Haha cracking my shit up! I fucking doing this just for you on my ole pickem up. Shit I could send you a beer through here I would.
I like your style. I got a '14. The '14 and '15 have the cr*ppiest illumination inside and outside. Headlights stink as well. What was the GM engineers thinking. May have to do this to mine. Thanks for the hint. looks good.
Hello sir my names mark,just subscribed to your channel and checking out your videos,I like your videos cause you get straight to the point on how to do something,the other videos I watch to try to learn,they just wanna get fame and I really don’t learn anything,looking forward to following your diy videos,if you have any advise for me on what to do to my rig “1988 Chevy k1500 short bed single cab” I’m all ears bud,again thank you keep up the good work
This guy is great lmao
I bet your'e a hoot after some Jack Daniels. I'm the same way, I do what I do. Have a good life, time for the next drink.
I have an 06 Silverado work truck with no courtesy lights or dome light. What wire would I tap into?
Does it have footwell lights ?
@@jumenss didn’t have no lights. Had to take a circuit tester and test the fuse box and add everything
I enjoyed your video. Being a low voltage tech and adding some stuff, this video was spot on. Great commentary. We need more Chevy guys here.
Very Good! I’m running some into the doors themselves to help light shit up, I have no
f-ing idea why chevy couldn’t do that. How many more lazy union & minority employees would it have taken? I would have said over paid but it depends on where your truck was built?
Great video, I agree these trucks dont have adequate lighting. Also these door sills may intrest you they use the same dome lights like you did, I doubt as bright but light up the same area. These videos show where you can tap in to the dome lights, Gray Wire at the BCM near the drivers feet, this would allow you to bypass running the wire from the top to the emergency brake since it's already near the emergency brake. Same guy installs some door handle llights too.
th-cam.com/video/6vFuV9TAGZE/w-d-xo.html
th-cam.com/video/CJiLdc1Sq30/w-d-xo.html
well said! LoL!
Asc funnyer then hell ya is...
6:40 lol
Yer one funny feller bud i tells ya whut.....