I've just repaired my watch. However: when removing the stem it is crucial to TURN the stem when pulling! You've mentioned that when described putting the stem back. I haven't found any button, but in place roughly shown on video, IDK, I push it with a very sharp tool, pull the stem while turning - it comes off easily. Geez, this thing looks very delicate, I hope I haven't broken anything else. What was broken in the first place: the minute hand displaced towards the second hand, blocking the second hand randomly. When I removed the movement, the minute hand went completely loose, I reattached it in place, made sure it doesn't block the second hand and well, it works as charm. THANK YOU! I would never did this without this video.
Thank's, I took the back off, removed the stem and fixed my wonkey watch hands. I used vernier calipers to unscrew the back (a tool I had already for measuring). Then a sewing needle with a magnifying glass to release the stem.
I thought that 'replace' watch movement also included removing the old movement from the watch face, and swapping the old (bad) one with the new movement.
hey ,if anyone else is searching for how to repair multimeter try Saankramer Electronic Magazine System (do a google search ) ? Ive heard some incredible things about it and my mate got amazing success with it.
Perfect for removing the movement of my Lorus Quartz watch, exactly the same movement as in your video. The inside of the crystal needed cleaning, job done and all looking good now :)
Thank you for such clear instructions. Looking for the 'arrow' that indicates where to press for the stem release, I found it as a printed arrow on the PCB track. So useful to know what to look for. Please note that some stems, as with mine, need to be turned to 'unscrew' first. Made the whole disassembly and final assembly such an easy process.
I bought this Seiko at the flea market thinking it was mechanical because it didn't say quartz anywhere. grrr. Well.... I must start somewhere. Your video helped greatly. Thanks!
Thank you very much, the video was so useful to me. I have a question please : I have guess watch model no. 113515G1, this watch I tried to change the battery, but when I did I damage the closer where it should be over the battery, then I use a small aluminum sheet and put it instead of that, the watch working very well and after 3 days the second hand is working continually and the other not. the minute hand and hour not working. Please, can you help me? Thank you again.
Thank you for your video. My inside part of my casio looks almost exactly like yours but i don't know why when I open it, there is a tiny spring on the side which falls and i don't know where it's supposed to be... Anybody has any ideas?
Great Video , it looks like i have wasted , hundreds, buying 3 seiko watches, 7T32-6K19 Seiko 7T32-6K50 and Seiko 7T32-6K60 , here in Tasmania, Australia , i'm told by a Seiko Service Center , they don't make those movements, or parts , so can't be fixed . Can they be fixed, i would love some expert, advice. Cheers Karl
On my Bering watch the movement does NOT tip out as in your otherwise excellent video. There is another tight fiting s/s rim that has to be removed but no idea how. The movement looks the same, a VX32E. Any ideas please?
Can u make a video on how to repair a watch of which the pin or dialer has been pushed to hard the it contains the same machine as the one I used (battery operated)
I was able to remove the stem perfectly just like in video. The watch movement won't come out though. It seems the back opening is smaller than the front face of watch. Are some watch have non removal movements? This is Daniel Wellington B32R6
When putting the stem back, should it always be turned first, then pushed in to click? I'm pushing it only and finding it difficult to click it back in. Then it pulls out totally, without being secured into the mechanism. I have been careful to position it correctly. To be honest, I am practicing this on a junk watch.
Hi, can you please show me how to remove the stem for a 251.471? I have a Gucci YA101322 and the stem broke about 10years ago. Planning to try to change the stem myself. Please please help!
Thanks to _this_ video, I fixed the roman numerals 'floating' around inside my ESQ!! In _under_ 10 minutes. Guess what I'm wearing tomorrow? 🎈✨🎈Thank you, Thank you, Thank you! 🎈✨🎈 🤗🤗🤗🥂😘😘😘
While servicing my watch the band hit the orange spring, the watch is fine for the most part but somtimes i feel its minute hand is moving faster or slower . Whats the orange part called?
THANK YOU so much. I've replaced batteries, adjusted bands and all that, but I could never figure out how to remove the stem! Is there any remedy for a loose second hand?
I legit just had my dog jump on me after being gone for a couple of hours my watch band broke and my watch fell to concrete and well the movement broke. Any idea where I can buy replacement internals?
I am trying to take the stem out of a Nixon watch but there is a wider part on the stem similar to stem 401-1599 in your parts list. I can get the stem to release but it won't pull out of the case. Can you tell what step I am missing. Thanks
Hello by any chance do you have a video tutorial with this same machine movement in reference to fixing it or do you know where I xan buy one ive seen ebay and such and cant seem to find it
Does anybody know the name of the dark green plastic frame surrounding the mechanism of the watch (UNDER THE BACK COVER) My new pulsar watch was dropped and the plastic frame which keeps the battery area and face of the watch stable is now missing. I will have to order a new part but have no idea what it is called or where to begin? Please help. TY
I find it very difficult to assemble the wheels of TITAN quartz movement.The magnetic wheel jumps up or moves side ways,making it horrible to fix the plate.All my attempts get futile.How to fix the wheels safely and very easily?Please let me know.
I had some trouble setting my wife's watch and pulled the stem all the way out. It goes back in, and the watch can be set, but the stem doesn't lock in very well. Is there a way to fix that? It's a Timex quartz.
I’m also a watch maker look at how rookies learn how to repair watches😂.... press the button with a tweser(the button you press to take out the stem) hold it down and put the stem back in while hold down.
Absolutely perfect video instruction. It made my job of cleaning the interior surface of the watch crystal easy. Thanks so much.
I've just repaired my watch. However: when removing the stem it is crucial to TURN the stem when pulling! You've mentioned that when described putting the stem back. I haven't found any button, but in place roughly shown on video, IDK, I push it with a very sharp tool, pull the stem while turning - it comes off easily. Geez, this thing looks very delicate, I hope I haven't broken anything else. What was broken in the first place: the minute hand displaced towards the second hand, blocking the second hand randomly. When I removed the movement, the minute hand went completely loose, I reattached it in place, made sure it doesn't block the second hand and well, it works as charm. THANK YOU! I would never did this without this video.
Hands and dial replacement?????????????????? Most difficult parts of work are missing
Thank's, I took the back off, removed the stem and fixed my wonkey watch hands.
I used vernier calipers to unscrew the back (a tool I had already for measuring).
Then a sewing needle with a magnifying glass to release the stem.
Thank you so much. I repaired my watch. Thank you.
I was unable to pull out the stem.. And this vedio helped me... Thanks
I thought that 'replace' watch movement also included removing the old movement from the watch face, and swapping the old (bad) one with the new movement.
hey ,if anyone else is searching for
how to repair multimeter
try Saankramer Electronic Magazine System (do a google search ) ? Ive heard some incredible things about it and my mate got amazing success with it.
Seiko Watch movement removing
So you put a new movement without a Dial??
Perfect for removing the movement of my Lorus Quartz watch, exactly the same movement as in your video. The inside of the crystal needed cleaning, job done and all looking good now :)
Thank you for such clear instructions. Looking for the 'arrow' that indicates where to press for the stem release, I found it as a printed arrow on the PCB track. So useful to know what to look for. Please note that some stems, as with mine, need to be turned to 'unscrew' first. Made the whole disassembly and final assembly such an easy process.
Many thanks. This video told me exactly what I needed to know. Well done!
I bought this Seiko at the flea market thinking it was mechanical because it didn't say quartz anywhere. grrr. Well.... I must start somewhere. Your video helped greatly. Thanks!
Thank you very much, the video was so useful to me.
I have a question please :
I have guess watch model no. 113515G1, this watch I tried to change the battery, but when I did I damage the closer where it should be over the battery, then I use a small aluminum sheet and put it instead of that, the watch working very well and after 3 days the second hand is working continually and the other not. the minute hand and hour not working.
Please, can you help me?
Thank you again.
And how to replace the movement?
Sir,my quartz seiko the day and date doesnt stick to its window on the face,it keeps tangling up and down,what is the possible cause.?
Great video, but I can't locate the stem release on my wrist watch, it's complicating, I did not see any arrow, please how do I go about this?
Thank you for your video. My inside part of my casio looks almost exactly like yours but i don't know why when I open it, there is a tiny spring on the side which falls and i don't know where it's supposed to be... Anybody has any ideas?
Great Video , it looks like i have wasted , hundreds, buying 3 seiko watches, 7T32-6K19 Seiko 7T32-6K50 and Seiko 7T32-6K60 , here in Tasmania, Australia , i'm told by a Seiko Service Center , they don't make those movements, or parts , so can't be fixed . Can they be fixed, i would love some expert, advice. Cheers Karl
I have an old seiko quartz. Can't find the release point for the stem. If I sent you a photo would you be able to spot it? Thanks.
Thanks you ,with this video i could repaire the watch from my grandpa
On my Bering watch the movement does NOT tip out as in your otherwise excellent video. There is another tight fiting s/s rim that has to be removed but no idea how. The movement looks the same, a VX32E. Any ideas please?
Can u make a video on how to repair a watch of which the pin or dialer has been pushed to hard the it contains the same machine as the one I used (battery operated)
Thanks dude i was trying it from hours 😍😍
Which order do the hands go back in
Where do you get replacement movements?
Many thanks! Fixed a watch after viewing this!! :)
This was great. I was able to repair a watch with this info. Thanks!
As for a beginner helped me a lot. Thanx.
I was stuck on how to removing my watch stem
U helped
Did just like that
I was able to remove the stem perfectly just like in video. The watch movement won't come out though. It seems the back opening is smaller than the front face of watch. Are some watch have non removal movements? This is Daniel Wellington B32R6
When putting the stem back, should it always be turned first, then pushed in to click? I'm
pushing it only and finding it difficult to click it back in. Then it pulls out totally, without being secured into the mechanism. I have been careful to position it correctly. To be honest, I am practicing this on a junk watch.
Hi, can you please show me how to remove the stem for a 251.471? I have a Gucci YA101322 and the stem broke about 10years ago. Planning to try to change the stem myself. Please please help!
Removing the stem was all I needed thanks
Thanks you so much I repaired my watch ..with guidance from this video
Is there longer lasting batteries can you upgrade batteries on wrist watches
I still can't reach the hands I need to remove the glass how do I do this
Is possible to change slow tik-tik movement of second hand to fast or smooth movement? Maybe by changing watch machine or something else???
Thanks to _this_ video, I fixed the roman numerals 'floating' around inside my ESQ!!
In _under_ 10 minutes. Guess what I'm wearing tomorrow?
🎈✨🎈Thank you, Thank you, Thank you! 🎈✨🎈
🤗🤗🤗🥂😘😘😘
While servicing my watch the band hit the orange spring, the watch is fine for the most part but somtimes i feel its minute hand is moving faster or slower . Whats the orange part called?
How to remove the winder out of an MTM wrist watch
I came for this 1:32. You saved my watch 😂
THANK YOU so much. I've replaced batteries, adjusted bands and all that, but I could never figure out how to remove the stem! Is there any remedy for a loose second hand?
Yes
Can i put a different eta movement from tissot quickster like a better eta movement?
good video, I only found the button when the winder was pushed in.
I struggled a bit because I could not see well enough....But Success! Thanks a lot.
Thanks for sharing this video. Subscribed to your channel.
I legit just had my dog jump on me after being gone for a couple of hours my watch band broke and my watch fell to concrete and well the movement broke. Any idea where I can buy replacement internals?
This video was so helpful thank you.
Nice explanatory video. Helped me fix my sons watch. Thank you.
excellent !! you have a new suscriber.
Is it alright to not wear gloves or is it a must?
I am trying to take the stem out of a Nixon watch but there is a wider part on the stem similar to stem 401-1599 in your parts list. I can get the stem to release but it won't pull out of the case. Can you tell what step I am missing. Thanks
thank you so much...this helped me alot to fix my watch🤟🏼💚
Thank you guys !
By the way, this is the Seiko 7N42 movement. That dimple is the tiniest to the right.
can this possibly work on a dual time watch?
(as in a watch that has analog and digital time)
What is the metal wire that popped out when I rotated the part of the watch?
Vidéo fort intéressante merci
i cant remove the stem on a TMI SII VC10E . Any advice?
Your video save my watch ... thanks
How is the Pulsar watch water resistant without a stem gasket?
Thanks alot. Very helpful
Professional Job i like what you do.
Hello are you fixing watches
is it possible to change an automatic to a quartz?
what to do if the hands are stuck in the glass container?
Thanks man!
Hello by any chance do you have a video tutorial with this same machine movement in reference to fixing it or do you know where I xan buy one ive seen ebay and such and cant seem to find it
Can i use small battery like this.
Great.
Sure would be nice to get the instructions on disassembly and reassembly of a ETA 980.163 quartz watch. Nothing on TH-cam at current date
gracias me ayudo mucho
wht modell is going in the model do thats?
Thank you so much I tried and it's work on my wrist watch
Thank you
Sir i have tevise t820 watch can you tell me how to remove stem
Does anybody know the name of the dark green plastic frame surrounding the mechanism of the watch (UNDER THE BACK COVER) My new pulsar watch was dropped and the plastic frame which keeps the battery area and face of the watch stable is now missing. I will have to order a new part but have no idea what it is called or where to begin? Please help. TY
Bought a watch today, but it doesn't work, I checked the battery to see and it was in good shape, how do I fix it? Any help?
I still can't remove the stem in ETA G10.711 Tag Heuer F1 2007
:-(
Any suggestions?
Video quality is excellent but subtitle covered video so it's hard to follow steps.
Thank you!!!
Thank You a Lot
Thanks, Very helpful for me.
I find it very difficult to assemble the wheels of TITAN quartz movement.The magnetic wheel jumps up or moves side ways,making it horrible to fix the plate.All my attempts
get futile.How to fix the wheels safely and very easily?Please let me know.
Found a lot of good information thanks this is very useful
Thanks so much, just what i needed!
I had some trouble setting my wife's watch and pulled the stem all the way out. It goes back in, and the watch can be set, but the stem doesn't lock in very well. Is there a way to fix that? It's a Timex quartz.
I’m also a watch maker look at how rookies learn how to repair watches😂.... press the button with a tweser(the button you press to take out the stem) hold it down and put the stem back in while hold down.
Thank you brother
I can't remove the plastic ring from the watch... What do I need to do :(
good video
Thanks sir very supportive video
all my fingers r now at 6 oclock and the date wheel doesnt line up...and clues
Brother great video......
Love you guys
Great content.
How do I remove the band completely from my big tic.
Thank u so much
thanks sir
Спасибо!
Bro alarm not working bro please solve
Wich movement is that my orient has it and is the same.