Thanks for the great video . Is it possible to get advantage of playing zero ads speeds ? For example zero yaw and pitch speed, 80 extra turning and after that set the per optic setting (1.8 or 2). I tried it and I think it did something positive. What do u think?
@@saeedshakur9868 it definitely has some kind of effect but not directly as a extra yaw/pitch. However as i said i dont really recommend playing alc per optics bleed over.
OMG, After further testing this was an absolute game changer for me! Hear me out and try it for your self before bashing me. But put your Outer threshold to 30 and your response curve between 0-5 with 0 dead zone. It’s an absolute no recoil Aimbot for me for some reason. You barely have to touch your stick to adjust and the AA feels super sticky.
Brother, you helped me a lot on this settings. I tried every settings I watched on youtube but yours truly works well. I play 2 fingers on my left fingers came from PC but I want to learn controller. You're the best, subbed!
Men, thank you so much. I have change my settings and tryed for days to reset them. finally with your settings the game finaly makes fun. Please make a video about FOV changing the aim assist.
Good video Extric, For my part, I play with the sensitivity at maximum and yaw at maximum horizontal, vertical 140 without maximum yaw, when aiming all 0 to have more aim assist.
And I configure the sensitivity of the scope independently, the dead zone at 0, the middle at 1, that is, the minimum, and the response curve at 8 so as not to have any drift in the scope.
At what points am I making a mistake or could you advise me to improve my sens? I am already used to the high horizontal sensitivity at maximum but I feel a lot of recoil when shooting pointed.
This is the best video on controller settings(and ALC bleedthroughs) thus far, really helpful. Do you know if ALC bleedthrough works the exact same on R5R?
I am sceptical about the bleed through impacting more than only per optics. I use 4/3 linear no deadzone with per optics from ALC. My aim is literally the same when I changed to a completely different account and put ALC on default and changed per optics to what I was using. Dropped 29 kills in a game of hardpoint or how it’s called in apex. Played a game revival trios with 18 kills 4k damage and played a game of ranked where I just did well. Then switched back to my own account. Feel no difference in aim. Shot 3k+ bullets on close range moving dummies and static long range targets with 70% accuracy with no attachments 301. I just feel like the game itself is bugging and the servers are changing how the game feels day by day.
Ok hear me out I found some really good alc settings. I noticed that your left stick deadzone is always small so its 15. Infogired out I like my deadzone a the same. I always played on 0 deadzone with linear or classic. I found that I really liked 5-5 classic no dead zone but still felt weird. So I did this , please just try it, it sounds crazy but just do it Deadzone 15 Outer 2 Curve 5 Yaw 380 Pitch 240 Ads 200 Ads pitch 90 I’m serious try it. I like my deadzones on each stick to feel the same. And the 5 makes up for the higher deadzone. Feels amazing.
Hey I have tried the settings you stated but I have a lot of movement on my crosshair when not touching the sticks is this normal and how can I stop that please
Thank you so much for the info man! 👍🏻 But today I saw a video where Extessy is talking about a secret that let's you play pure 4-3 linear no deadzone without any ALC bleeding out, is that's what were talking about in this guide? I wonder if this is what he meant. Also another question please, what's the name of the software you used at 21:00 to explain? Subbed for the valuable information :) thank you
I go down the rabbit hole with ALC settings but from my own experience all of your information is very accurate.. I played a lot of console when I was younger but I've been mouse and keyboard for like 5 years and now controller feels really slow unless i play on higher sensitivity.. Im looking to find something between 5-4 linear and 4-3 classic.. I think that would be the best.
So alc bleed over 30 response and 0 everything else is the most controllable and increased slow down AA correct? What does turning AA off in alc really do for this? Help the slowdown more or less? Make the AA bubble smaller or stay the same? Thats the only thing that confused me a tad. Ty!
As for someone that has used alc since season 1 I hate how 4/3 liner feels, it feels too floaty to me. Alc without any ramp up and delay is way better for muscle memory imo. Find a setting and stick with it is the only advice I can give using them you'll just eff your shit up constantly changing 😂
Hey man so I’m very particular and hate the stick drift does your bleed over still work good if I play 4-3 linear small dz? I also play on 104 that’s what works for me.
So I moved from classic to linear. I have even tried alc of all pro players I can't keep up with them I feel like linear is very consistent for me.. There was clip you were showing put the alc response curve on 30 and then turn off the aa off right then what about per optics alc
2 question friend 1 you said classic good for long range is that mean if i use linear i can get kill from long range, and second question is what u recommend response curve for alc
Don’t forget to mention the ALC per optic bypass with classic settings. You can manually set each per optic ALC, keep them on and turn off ALC main screen and it will “bleed” over, making your classic settings more custom.
Also, what is your opinion on using 3rd party software for deadzone? For ex i use ICUE and i play 2% deadzone but ingame i play no dz 4-3 linear. Feels so much better than small dz and woth actual 0 dz i cant shoot longrange at all as my drift feels too unstable and its impossible to center the stick. So like 1-2x longrange legit feels so bad. I play 2 or 3 dz and i do really well longrange with 3030 and sentinel. My actual downside is close-mid range in general with ARs tbh..
The problem with third party added deadzone is that it doesnt work the same as the apex deadzones, as they are built into the game so if you play no deadzone ingame for example and then use like 4% deadzone on your software you basically just cut off the first bit of the reponse curve which makes you jump into a higher sens everytime when you move you‘re stick. Its basically not building up slowly after the deadzone like a normal apex deadzone
@@extricyt Does this still hold true if you play pure linear tho? Like for example, I want to use the dualsense edge deadzone function just on my right thumb like 1% deadzone so my left thumb stays responsive...your saying 1% deadzone on my dualsense edge software would be different to 1% deadzone on apex settings??....how so?? assuming I am playing pure linear alc's like gens (0 response curve). your thoughts would be appreciated
As for someone that has used alc since season 1 I hate how 4/3 liner feels, it feels too floaty to me. Alc without any ramp up and delay is way better for muscle memory imo. Find a setting and stick with it is the only advice I can give using them you'll just eff your shit up constantly changing 😂
I forgot the reponse curve for alc, i recommend anything between 0-5.
Thanks for the great video . Is it possible to get advantage of playing zero ads speeds ? For example zero yaw and pitch speed, 80 extra turning and after that set the per optic setting (1.8 or 2). I tried it and I think it did something positive. What do u think?
@@saeedshakur9868 it definitely has some kind of effect but not directly as a extra yaw/pitch. However as i said i dont really recommend playing alc per optics bleed over.
Ngl in 3 videos youve actually helped me more than the dozens ive watched from the big channels, i hope you blow up bro you deserve it
OMG, After further testing this was an absolute game changer for me! Hear me out and try it for your self before bashing me. But put your Outer threshold to 30 and your response curve between 0-5 with 0 dead zone. It’s an absolute no recoil Aimbot for me for some reason. You barely have to touch your stick to adjust and the AA feels super sticky.
Not even kidding ive seen so many guides yours was actually the best , keep up the good work thanks a lot !😊
Means so much bro
this is by far the most accurate explaination ive ever seen
Brother, you helped me a lot on this settings. I tried every settings I watched on youtube but yours truly works well. I play 2 fingers on my left fingers came from PC but I want to learn controller. You're the best, subbed!
I’ve been watching ur twitch for a week or so now and using this alc bleed over for about 2 weeks and it has made me a better player so thanks
no problem :) and ty for tuning into the streams!
Men, thank you so much. I have change my settings and tryed for days to reset them. finally with your settings the game finaly makes fun. Please make a video about FOV changing the aim assist.
Good video Extric, For my part, I play with the sensitivity at maximum and yaw at maximum horizontal, vertical 140 without maximum yaw, when aiming all 0 to have more aim assist.
And I configure the sensitivity of the scope independently, the dead zone at 0, the middle at 1, that is, the minimum, and the response curve at 8 so as not to have any drift in the scope.
At what points am I making a mistake or could you advise me to improve my sens? I am already used to the high horizontal sensitivity at maximum but I feel a lot of recoil when shooting pointed.
Also 7% turning delay with 220 default turning extra yaw is good for movement and hipfire/acquisition
This is the best video on controller settings(and ALC bleedthroughs) thus far, really helpful.
Do you know if ALC bleedthrough works the exact same on R5R?
I am sceptical about the bleed through impacting more than only per optics. I use 4/3 linear no deadzone with per optics from ALC. My aim is literally the same when I changed to a completely different account and put ALC on default and changed per optics to what I was using. Dropped 29 kills in a game of hardpoint or how it’s called in apex. Played a game revival trios with 18 kills 4k damage and played a game of ranked where I just did well. Then switched back to my own account. Feel no difference in aim. Shot 3k+ bullets on close range moving dummies and static long range targets with 70% accuracy with no attachments 301. I just feel like the game itself is bugging and the servers are changing how the game feels day by day.
Maybe it’s bc this has helped me so much but I’ve watched this video 4-5 times on different occasions thx man this shit is goated
Ok hear me out I found some really good alc settings. I noticed that your left stick deadzone is always small so its 15. Infogired out I like my deadzone a the same. I always played on 0 deadzone with linear or classic. I found that I really liked 5-5 classic no dead zone but still felt weird. So I did this , please just try it, it sounds crazy but just do it
Deadzone 15
Outer 2
Curve 5
Yaw 380
Pitch 240
Ads 200
Ads pitch 90
I’m serious try it. I like my deadzones on each stick to feel the same. And the 5 makes up for the higher deadzone. Feels amazing.
What fov would you recommend on these? I feel like that sort of affects the sens a bit
Anything between 104 and 110
Hey I have tried the settings you stated but I have a lot of movement on my crosshair when not touching the sticks is this normal and how can I stop that please
Thank you so much for the info man! 👍🏻
But today I saw a video where Extessy is talking about a secret that let's you play pure 4-3 linear no deadzone without any ALC bleeding out, is that's what were talking about in this guide? I wonder if this is what he meant.
Also another question please, what's the name of the software you used at 21:00 to explain?
Subbed for the valuable information :) thank you
i used epic pen and just opened notes to draw :)
What he meant was propably the fresh install of apex that gives u pure linear but i dont like it that much
I go down the rabbit hole with ALC settings but from my own experience all of your information is very accurate.. I played a lot of console when I was younger but I've been mouse and keyboard for like 5 years and now controller feels really slow unless i play on higher sensitivity.. Im looking to find something between 5-4 linear and 4-3 classic.. I think that would be the best.
I do stand on kontrol freaks though with higher sens cause it compensates for the lower response time + provides accuracy.
What about ALC per optics? Even when they are off, they have a pretty noticeable effect on aiming & turning. Weirdly enough
I’ve done everything you said and no matter what I can’t even turn when I ads
So alc bleed over 30 response and 0 everything else is the most controllable and increased slow down AA correct? What does turning AA off in alc really do for this? Help the slowdown more or less? Make the AA bubble smaller or stay the same? Thats the only thing that confused me a tad. Ty!
Nothing really changes i just felt like when its on i get weird inconsistencies. Feels like small ads bugs when its on sometimes
It is good to leave the ALC in default and adapt the turn delay or just deactivate it
I'd rather play the default sensitivity's in that case
do you still play ps4 ver of apex on ps5? thanks
Aight. Time to try this out
Do Battleabeaver controllers work for Xbox One?
How do you use the survival kits? Like the heat shields ect?
I go into my inventory
As for someone that has used alc since season 1 I hate how 4/3 liner feels, it feels too floaty to me. Alc without any ramp up and delay is way better for muscle memory imo. Find a setting and stick with it is the only advice I can give using them you'll just eff your shit up constantly changing 😂
Hey man so I’m very particular and hate the stick drift does your bleed over still work good if I play 4-3 linear small dz? I also play on 104 that’s what works for me.
try 15% dz 2 outer threshhold and 1 response curve and then everything zero with target compensation on, thats what i recommend with small dz
@@extricyt good looking out man I’m liking it 💯
How many hours do you have on controller?
When u Launch Apex again does the alcs have the same bleedover ?
this is a good question, im not entirely sure however when i launch apex i never go back into my alc and im perfectly fine so i dont think so
@@extricytthanks
They don't, you have to change a slider for it to trigger the bleedthrough. If you don't, your sens will feel like all of them are set to 0
@@HishamK_yes i heard that from dezignful before, havent seen any proof yet tho
Guys, is there's a way to TOTALLY stop that bleedover? I want to play pure 4-3 linear no deadzone
You should do a video of you trying peoples settings.
good idea i will keep this in mind
So I moved from classic to linear. I have even tried alc of all pro players I can't keep up with them I feel like linear is very consistent for me.. There was clip you were showing put the alc response curve on 30 and then turn off the aa off right then what about per optics alc
Default and off
End of this video he covers that clip
2 question friend
1 you said classic good for long range is that mean if i use linear i can get kill from long range, and second question is what u recommend response curve for alc
Yes if you practice with linear you will get good long range aswell, for alc i recommend anything between 0-5
@@extricyt thank you a lot and sorry for my comment cuz my English is not good
@@extricyt thank you a lot and sorry for my comment cuz my English is not good
brother the only alc that bleed over is the per optics settings. all that other settings is some placebo type shit. smh haha
Don’t forget to mention the ALC per optic bypass with classic settings.
You can manually set each per optic ALC, keep them on and turn off ALC main screen and it will “bleed” over, making your classic settings more custom.
i meantioned this, however i dont recommend it because it can lead to ads bugs
if 110 is 3 then what is 4? actually what is 4-3 converted to alc so I can tweak that
Its 140, there is a conversion chart on reddit. Just search for converting controller sensitivity to alc
10 ping is crazy wish my ping was that low
I use 4-2 stedy its so good try to test
That’s crazy. Do you really use it?
Best monitor?
Benq zowie monitors imo, bit they are quite expensive
Also, what is your opinion on using 3rd party software for deadzone? For ex i use ICUE and i play 2% deadzone but ingame i play no dz 4-3 linear. Feels so much better than small dz and woth actual 0 dz i cant shoot longrange at all as my drift feels too unstable and its impossible to center the stick. So like 1-2x longrange legit feels so bad. I play 2 or 3 dz and i do really well longrange with 3030 and sentinel. My actual downside is close-mid range in general with ARs tbh..
The problem with third party added deadzone is that it doesnt work the same as the apex deadzones, as they are built into the game so if you play no deadzone ingame for example and then use like 4% deadzone on your software you basically just cut off the first bit of the reponse curve which makes you jump into a higher sens everytime when you move you‘re stick. Its basically not building up slowly after the deadzone like a normal apex deadzone
This is my exact question ,
I put my software deadzone on 2%-4% but keep apex deadzone zero. Can you explain again please.
@@extricyt Does this still hold true if you play pure linear tho? Like for example, I want to use the dualsense edge deadzone function just on my right thumb like 1% deadzone so my left thumb stays responsive...your saying 1% deadzone on my dualsense edge software would be different to 1% deadzone on apex settings??....how so?? assuming I am playing pure linear alc's like gens (0 response curve). your thoughts would be appreciated
How much did your capture card cost
145 swiss franks its a elgato hd60x
Is this for ps5 bro
yes i am on ps5
OK gonna try these alc tonight ,, thanks
Does dizgnfull use aim assist?
Who is this blooming flower? Or keniru does he show his settings or does he have a TH-cam?
he doesnt really do content, however his twitter is @niru_ken
Can u show us your graphic settings? My game is always so dark
Im on console i can only change my brightness
Are you still doing the same bleed over boss?
Why am I so shite compared to you.
He either uses a strike pack or a cronus
@@arra5139 wrong aim better kid.
I made a linear alc with 1% threshold and it’s aim assist is way stronger than default 4-3 so idk
What is the sens?
wsg
whatsupp
am I first chat ? 🤔🤔
As for someone that has used alc since season 1 I hate how 4/3 liner feels, it feels too floaty to me. Alc without any ramp up and delay is way better for muscle memory imo. Find a setting and stick with it is the only advice I can give using them you'll just eff your shit up constantly changing 😂