Very helpful and easy to follow, quick and correct. Thanks! I would add that everyone who update from some older Betaflight version may experience outdated names when importing via CLI, as in the end of this video. How I fixed this? I edited the downloaded .txt file (using any editor like SublimeText3) and removed actually all the red ERROR warnings, then reimporting it again. Also, in case someone experience CAMERA_CONTROL issue while importing the .txt file, make sure to flash the Betaflight version again but this time adding CAMERA_CONTROL into the Custom Defines field just when choosing the board and version of the firmware you want to download.
Hi Luke so with the help of IC Impulse driver fix i was able to upgrade my firnware right away. Just have one other issue preventing my motors to arm. Ill get nack to you on this!! Thnx a lot bro ✈️✈️👍
Very helpful video Luke as i am attempting to flash my FW for the very first time. Question: Where do i need to look for the current fw for my 2 yr old Eachine Lal3 4s quad?
luke i cannot get my quad to fly. I had this problem before i upgraded the firmware and i checked the ESC's and all motors are set to normal as far as the rotation is concerned. Any thoughts on this?
Hi Luke i am having trouble updating the firmware on my Eachine Lal3 quad.I wrote down and followed each step corresponding to your video. Once i enter bootloader mode i get a "recovery/communication lost and if i upload firware (online) and upload (local firmware) and hit flash firmware i get a red error stating (No response from bootloader /programming failed.The baud rate is 15200 and at no time do i get bootloader above baud rate. I also tried diffetent firmware levels. Can you help me with this, i really appreciate it very much..
Can Anyone help me please, I bought Eachine 5 years ago I never used it. Now I'm trying to use it I'm not able to connect the Eachine UK65 with Betaflight, I get this , warning, the firmware version is not supported please upgrade firmware that supports api version 1.41.0 or higher alternatively download and use an older version of configuration if you are not ready to upgrade.. what do I do ?
Open it from Finder first. It will ask you if you trust the source or give you an option. As soon as you open it that way you can open it from the Launchpad from then onwards
Very helpful and easy to follow, quick and correct. Thanks! I would add that everyone who update from some older Betaflight version may experience outdated names when importing via CLI, as in the end of this video. How I fixed this? I edited the downloaded .txt file (using any editor like SublimeText3) and removed actually all the red ERROR warnings, then reimporting it again. Also, in case someone experience CAMERA_CONTROL issue while importing the .txt file, make sure to flash the Betaflight version again but this time adding CAMERA_CONTROL into the Custom Defines field just when choosing the board and version of the firmware you want to download.
back up settings, load new firmware, load backed up settings... got it. Thank you sir!!
Hi Luke so with the help of IC Impulse driver fix i was able to upgrade my firnware right away. Just have one other issue preventing my motors to arm. Ill get nack to you on this!! Thnx a lot bro
✈️✈️👍
thanks mate, very helpful!
Very helpful video Luke as i am attempting to flash my FW for the very first time. Question:
Where do i need to look for the current fw for my 2 yr old Eachine Lal3 4s quad?
I followed all this steps but I couldn’t flash to the latest firmware
When I flash firmware it says falled to open serial port any help would be great
luke i cannot get my quad to fly. I had this problem before i upgraded the firmware and i checked the ESC's and all motors are set to normal as far as the rotation is concerned. Any thoughts on this?
Hi Luke i am having trouble updating the firmware on my Eachine Lal3 quad.I wrote down and followed each step corresponding to your video. Once i enter bootloader mode i get a "recovery/communication lost and if i upload firware (online) and upload (local firmware) and hit flash firmware i get a red error stating (No response from bootloader /programming failed.The baud rate is 15200 and at no time do i get bootloader above baud rate. I also tried diffetent firmware levels. Can you help me with this, i really appreciate it very much..
i had to download the impulseRC driver fixer to get mine to work
Thnaks man
Can Anyone help me please, I bought Eachine 5 years ago I never used it. Now I'm trying to use it I'm not able to connect the Eachine UK65 with Betaflight, I get this , warning, the firmware version is not supported please upgrade firmware that supports api version 1.41.0 or higher alternatively download and use an older version of configuration if you are not ready to upgrade.. what do I do ?
hey im using Mac m1 ...plz tell me how to download beta fight ,,,,I downloaded it but cant open because macOS didnt let me to open
Open it from Finder first. It will ask you if you trust the source or give you an option. As soon as you open it that way you can open it from the Launchpad from then onwards
@@lukebeshara oh thanks lot😂 always had that move to bin error
link