Hello Sir, great explanation. Could you tell me if the bulb is a normal one like the one we use in house? or is it an special one for DC? i ask because the IPM give DC voltage
You are right, we can not change frequency of DC voltage, hence the voltage output from IPM is AC voltage but divided in three phase or pulses. So the bulbs used are normal ac bulb of 230-250 volts 15 to 100 Watt.
Hello sir in my carrier inverter ac outdoor unit pcb led 33 time blink and compressor starts only for 3to 4 seconds an stops with jerk Indoor unit not showing any error only outdoor 33 times blink All sensors ok Compressor windings ,connection normal ,there is sufficient gas then what is the problem plz reply
तिनो बल्ब स्टार कनेक्शन मे जुडा है तो स्टार पॉईंट मे vurtual नुट्रल पॉईंट बनता है यदी आप अलग अलग wattage के बल्ब estemal karege to nutral point shift ho jayega aur kam wattage wala bulb bahut hi jada bright jalega esaliye same watt ke bulb use karana jaruri hai
Thank you for yor channel and this video. I'm a HVAC serviceman and watch yor video with interest always!
Thanks dear for watching my videos. Please share my TH-cam channel with your friends too 🙏
Sir APKa information.bhut achanhai
Thanks dear, please share with your contacts too
Thanks for the English video. Good explanation
Thanks for sharing master.super Nice Idea.🙏🙏👍👍👍👍👍👍👍
Thanks, please share with your contacts too
Super like
Bhai hindi mein bhi available hai
th-cam.com/video/wU2-PObBaAw/w-d-xo.html
Great good sir please do more videos in English
Good explanation👍👍👍👍👍
Thank you very much sir
Gog bless you always🙏🙏🙏🙏🙏
Excellent sir
Very very good job
Excellent explanation
Thanks 👏
Nice explain sir
Thanks
Excellent
Hi Sir that bulb do you used how many watts and is that dc bulb? Thanks
thanks
Thanku sir
Good sir
Thanks
👌
Hello Sir, great explanation. Could you tell me if the bulb is a normal one like the one we use in house? or is it an special one for DC? i ask because the IPM give DC voltage
You are right, we can not change frequency of DC voltage, hence the voltage output from IPM is AC voltage but divided in three phase or pulses. So the bulbs used are normal ac bulb of 230-250 volts 15 to 100 Watt.
Sir jo holder MA wire lagi hn vo koi b 3 joor len ya is MA plus mafi hoti hn
Great sir
Thanks for your support
My best regards
Sir don't mind. This is star connection not delta.
Compressor jack ko khol ke jab uvw check kiya tab kuch der me bulb glow hoke off ho gaya agar bulb glow karte hai off nahi hota toh kiya dikkat hai
Sir real me 3 bulb se 100 % check ho sakta ya inverter pcb kharab haii ya compressor karab haii
Pulp is ac or dc volts
Supper sir
Thoda hindi me bolie 🙏🙏🙏🙏
Hello sir in my carrier inverter ac outdoor unit pcb led 33 time blink and compressor starts only for 3to 4 seconds an stops with jerk
Indoor unit not showing any error only outdoor 33 times blink
All sensors ok
Compressor windings ,connection normal ,there is sufficient gas then what is the problem plz reply
Hello sir are you using AC bulb or DC bulb please tell me
Normal AC blub of 15 to 100 Watt
@@technicalgurubhaskar6657 sir.. AC with what voltage for that bulb you are used?
I have problem with my ac compressor is not running. But outdoor fan is running. I'm not sure either compressor or IPM is bad.
Watch my videos hope that helps
Are we able to use in vrv system? Bcos of 3 phase
No, because in 3 phase voltage is very high and not in pulses.
Good mrng sir g. Is bulbs ko nutral kaha se mila jo ke on huva, , ye uvw me sirf phase rehta hi na sir, i have a dought sir g. Pls give me a answer
इस में न्यूटरल की जरूरत नहीं, फेस और फेस के बीच ड्रॉप वोल्टेज होती है। यू और वी , वी और डब्ल्यू तथा डब्ल्यू और यू में प्लस में होती है
तिनो बल्ब स्टार कनेक्शन मे जुडा है तो स्टार पॉईंट मे vurtual नुट्रल पॉईंट बनता है यदी आप अलग अलग wattage के बल्ब estemal karege to nutral point shift ho jayega aur kam wattage wala bulb bahut hi jada bright jalega esaliye same watt ke bulb use karana jaruri hai
Sir we using Normal AC bulbs
How many watts your bulb
Sir...thank u in advance..
Sar please hindi me bhi btaya karo
Can we check with out IBM or pcb
No, unit must be installed..
Sir this deta using in inverter fridge also
yes, you can check any inverter compressor but with IPM board.
thanks sir
How to run without board in compressor and fan motor
Thank you sir
👍
Thanks
Please send the Hindi video
🙋👍
Bhai kit ne watt ka bulb lagana hai
15 se 100 Watt ka laga sakte ho
Hi sir
If blub regular glowing and not cut in few seconds. So what is the problem in pcb and how to repair this
Please watch this video will be helpful th-cam.com/video/RfhhT6Cqw-I/w-d-xo.html
It is star connection...
Not delta
Thanks for correcting
सर इस तरीका से इनवर्टर रेफ्रिजरेटर के कंप्रेसर को भी हम चेक कर सकते हैं कि नहीं
Yes, we can check refrigerator inverter compressor with this jig....
If the compressor is defective what will how do i know?
Sir hindi mei video banao
Sir
Mere pass Voltas ka inverter ac hai. Jisme E4 error aa rha. Aur compressor On nhi ho raha. To kya karu sir??
Hii
How check error Po inverter aircond
Bhi koi b taknession etna pada likha nhi hota jo aapki english ko smj sake. Plzz speek hindi only
यह वीडियो हिन्दी में भी है। इस लिंक से देख लो th-cam.com/video/wU2-PObBaAw/w-d-xo.html
और भी वीडियो हिन्दी में हैं