ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Make Turbine Pinwheels - Amazing Coke Can Project

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 มิ.ย. 2016
  • Turbine Pinwheels! Dialed In version of the basic pinwheels - make something new that can be used for fun and decoration! This is not your ordinary craft project. In this video I will teach you how to turn a drink can into a turbine fan / pinwheel. We will then get more Dialed In and make three different ways to display them; hangers (hang from a tree, a balcony, a plant…), table top displays (perfect for picnics, BBQs, parties and more) and even put them on a stick so that they can be used for silly fun (just remember that these are aluminum cans so they can be sharp; caution is advised). The handle version can be pushed into the ground, sand, potted plant or anything else that can hold them up or they can be attached to a place that gets a good breeze… perhaps the back of a bike. Just put these in the path of a slight breeze, a fan or even a strong wind and watch them spin.
    I had fun getting creative with some spray paint and came up with some festive decorations. This turned out to be a great way to recycle or repurpose some aluminum cans. Actually, everything that I used in this video was a repurposed item so my cost to make a bunch of these was FREE! Yep, 100% completely FREE! The key materials that I used were as follows:
    - Aluminum Cans (rinsed and dried)
    - Metal coat hangers (the kind that come from the cleaners)
    - Tape or beads (used as spacers beneath the pinwheel)
    - Spray paint (I just grabbed leftover materials from other projects)
    - Dowel rod or stick (optional for mounting as a handle)
    - Wood blocks (optional for mounting as table top displays)
    Tools that I used include:
    - Masking tape (for laying out cut lines)
    - Box cutter (for cutting the can)
    - Marker (for tracing out the cut lines)
    - Wire cutters & pliers (for cutting and shaping clothes hangers)
    - Hole punch (like an ice pick) or nail (to make small hole in top and bottom of each can)
    - Drill (for making holes in optional handles or table top displays)
    Previous Pinwheel Videos from Dialed In DIY:
    - Pinwheels from aluminum cans (original design): • Make Pinwheels from al...
    - Make a Pinwheel Display - Fun Hack for Lawn & Garden (keeps some pests away from the plants): • Make a Pinwheel Displa...
    No matter what your purpose is in making pinwheels this method is a fun, craft - like project that is great for making something new out of something disposable. Pretty cool!
    Music: www.purple-plan...
    End note: I love taking a project and continuing to seek ways to expand or improve upon it and that is exactly how I came up with this Turbine design. That is why I am “Dialed In DIY;” because I like to get creative and keep Dialing In my projects and designs. This is stuff that I really enjoy doing and I simply hope that you are able to get some enjoyment from the videos and/or projects as well! Thank you for watching…. I greatly appreciate your support!

ความคิดเห็น • 21

  • @Midnight-rj4ed
    @Midnight-rj4ed ปีที่แล้ว

    I will try this to hopefully scare the squirrels out of my garden. Thanks.

  • @BravoSixBC
    @BravoSixBC 3 หลายเดือนก่อน

    Hello, why don't you use it as a Maglev windmil to generate energy ?
    Multiple in parallel above each other..
    Why not ? Just leaving it here

  • @danielmurzellotheunknownma7481
    @danielmurzellotheunknownma7481 2 ปีที่แล้ว

    Hello👋🙋‍♂️ there once again..
    Amazing and very interesting project..
    Fun to make.. Super like👌
    Well explained from start to end.
    Do keep posting
    Warm regards and best👍💯 wishes..
    The UnknownManCub 👍😎👨‍🏭

  • @sadistic_sock6428
    @sadistic_sock6428 8 ปีที่แล้ว +1

    i dont really know what i would use this for but hell that is COOL! can u do some project where u would use these? keep up the good work!

    • @DialedInDIY
      @DialedInDIY  8 ปีที่แล้ว

      Thanks and yes! :-) I have a couple of ideas that I have been experimenting with for using pinwheels in other projects... beyond the "decoration" kind of ideas mentioned in the video (I made a bunch of these for outdoor table top decorations... sort of a fun, festive summertime thing).

  • @vhkv1983
    @vhkv1983 5 ปีที่แล้ว +1

    cool project, interesting voice! :)

    • @DialedInDIY
      @DialedInDIY  5 ปีที่แล้ว

      Thank you very much for the feedback... I had to re-listen to some of it to double check but yep,.. I cringe on some of these when I hear them again. I used to record voice late at night and would try to be quiet so that I did not wake anyone up in the house. It sounds like I was going for some kind of late night radio voice but that was not the goal... LOL! Thanks for watching the video too!!

    • @vhkv1983
      @vhkv1983 5 ปีที่แล้ว +1

      @@DialedInDIY my pleasure! :)

  • @Hollyclown
    @Hollyclown 7 ปีที่แล้ว +3

    I wonder if you can use these for energy...

    • @DialedInDIY
      @DialedInDIY  7 ปีที่แล้ว

      Absolutely... hooked up to a motor it can generate power with enough wind.

    • @cvpid8557
      @cvpid8557 6 ปีที่แล้ว

      I need a vedio

  • @CraigsOverijse
    @CraigsOverijse ปีที่แล้ว

    why not wear work gloves for folding? nice idea though

  • @sillyhobbitwillywobbit5142
    @sillyhobbitwillywobbit5142 4 ปีที่แล้ว +3

    Hey, your voice sounds like the character named Spike from the anime show called "Cowboy Bebop" ! are you the english dub voice of Spike Spiegel? xD (Spike is kind of a bad*ss so this is meant to be a compliment)

    • @DialedInDIY
      @DialedInDIY  4 ปีที่แล้ว +1

      Totally wish I was a voice actor (it is one of my dream jobs) but sadly, no. Either way I would take it as a compliment so thank you very much! Thanks for watching and for the comment!!

  • @user-yz4dv7og4p
    @user-yz4dv7og4p 3 ปีที่แล้ว +2

    ♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡♡

    • @DialedInDIY
      @DialedInDIY  2 ปีที่แล้ว

      :-) [So sorry for the delay... life kinda got in the way for a bit]

  • @keithmolbeck260
    @keithmolbeck260 3 ปีที่แล้ว +1

    Have you figured out how to turn it into a wind turbine?

    • @DialedInDIY
      @DialedInDIY  3 ปีที่แล้ว

      I put an axle in one and hooked it up to a mounted motor (small motor) and was able to get some power flow from the motor contacts. I just have not taken it past that step. Were you going to give it a try?
      Thanks for taking time to post a comment.

    • @keithmolbeck260
      @keithmolbeck260 3 ปีที่แล้ว

      @@DialedInDIY Not yet. I was wondering if you could use a 12 volt battery and dc converter and somehow get electric from the pinwheel.

  • @georgestestes3464
    @georgestestes3464 3 ปีที่แล้ว +1

    9

    • @DialedInDIY
      @DialedInDIY  3 ปีที่แล้ว

      Hmmm... I'm curious. Nine as in "no?" 9 out of 10? Either way, thanks for taking time to watch and post a comment.