Carrera 132 124 Wireless Controller Installation and programming for digital slot car racing.
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- www.carreraslo...
Memberships
/ @merryboozerrc
Boozer Merch
teespring.com/...
callie-graphic...
If you are getting into the digital slot car racing, this is a product you should look into. This will allow you to have up to 6 transmitters on one device. It also gives more freedom of movement for the racers so you are not stuck close together with the wires. Check out this video to learn how to set up this addition to your track.
Appreciate this post years later. Hahaa. Couldn’t get my controller to connect to a car and this helped big time. Appreciate yah. Hope your still slotting!!!
SWEET. Just unbelievable how they work. Like I said the only one I've ever had about 65 years ago. Great vido Wes Nd Lori. 🚙😎💗💗
I just received my wireless controllers. Thank you for this video. One thing you failed to note is during pairing, the LED on the top of the controller, will flash its channel number. IE: two flashes for channel number two.
That is really cool Wes! I can’t watch more of these videos though or I will need to get a set of my own 😜
Can’t wait to see and race on that track.
You mean you can’t wait for me to kick that butt on the track
We will see!
Thank thank you very much for adding this video. This helped me a lot with pairing up the controllers and the cars. I do have a question though. When my truck is plugged in and my controllers are charging, everything turns off after a little while. The whole system seems to time out if it’s not being played
I have same issue. To to charge when the track shuts off after 20 minutes?
Hi..Thanks for the video. So how do you charge the controllers? The track automatically shuts down after a few minutes.
I am able to bind the controllers no problem, but when I try to code the car to the controller as in your video and the written instructions nothing happens. Batteries are new and fully charged. Any suggestions?
I’m trying to connect a wired controller extension box and directions say to connect to tower one port on CU. My wireless controller receiver connects to tower one port. The wired extension shows ports 1, 3, 4 on the side as the new port assignments. Since port two is left off I would deduct that the wireless receiver should plug into port two. Is that correct??? I cannot find this information anywhere! Thank you!
I bought an additional Carrera set as add-on for my existing layout. I can't seem to pair the new wireless controllers that came with the new set. Are they paired with the control unit that they came with ? Why won't my existing control unit recognize them ? I have my current wireless pair connected to the wireless transmitter which is connected to the control unit through tower one port. Any help would be greatly appreciated.
Trying to run 4 wireless and 2 wired.
I've just got a carrera set & as I live in the uk , the new set has come with a 2 pin socket instead of a 3 pin socket which we use in wall socket in the uk . Is there a adapter for this please. 🤔 thank you 😊
how many wireless controllers can you operate w/o adding more power supplies?
Hi my name is Gary I have a Carrera Digital Race Track. I set my track up and was running it yesterday. Then it stopped working. I just watched your video and did everything you did and still my track is not running. I even reprogrammed it and its still not working. What could be wrong.
what apps are available...and what can they do?
Does it come with the digital receiver or do I have to buy that separately?
how do you run 2 wireless and 2 corded?
There are 4 controller ports when you plug in the wireless adapter on tower one the two wired controllers need to be in port 3 and 4 😉
I have a very big quastion. And it is important. Can you connect this carrera 132/124 wireless controllers with CARRERA EVOLUTION CARS. I realy need to know. Thanks to anyone who will tell me.
Awesome video! I have a Carrera digital 132, but whenever I try to click the pair button on the controller and it's not on the charging station, nothing happens, I was wondering if you might know what the problem is? If you do please let me know! Thanks!
BRO SAME
I NEED HELP
What is the kits product number so l can find one too buy thanks
Link is in the description of the video 😉
@@MerryBoozerRC LoL thanks should have looked there first
Hallo! Can you help me? Two month ago i bought new Carrera d132 and after completing there is one problem, as seen on video below. I don´t know, what to do. While driving , suddenly the control unit starts flashing and beeping and the cars stop. This signal sometimes stops after a few seconds, sometimes longer, or only after the control unit is switched off and on. This error repeats differently, sometimes once for five minutes while driving, sometimes much more often. This problem arises when driving cars separately, but also together. Thank you for your answer. drive.google.com/file/d/1HA_QaNh1mkCk6WgzoeKPJaRPOquNvI4R/view
Sounds like it might have a short... is there anything touching across the rails?
@@MerryBoozerRC Hallo! Thank you for your prompt answer. I checked this possibility several times. No wires, no wrong contact :(
@@jozef68 - Hi, I watched your video. Did you find out what the cause was?
@@nja3224 Hello! No, I did not :( I contacted Carrera service and they wanted me to send them control unit, cars and controllers for checking. After servis checking they wrote me, that all components are ok and that the problem may be more than one ghost car driving and then also that my track is long. My track is 11 metres. Several people have told me, that it is not long. OK. So I demounted the track and I made the smallest circuit and... watch the video below. The red car drives like a ghost car, the others for manual control, wireless, possibly wired. I physically checked all the parts, there are only 8 pieces. Nothing suspicious. Track is clean, no wires. But always the same problem. I don't understand :( I don't know what else to try. Thank you for your interest. drive.google.com/file/d/11-9s12I2AGUlb5ytHtku4bPtqzpDxev6/view?usp=sharing
@@jozef68 - That’s too bad. Do you know anyone else nearby who has a set to try their control unit? If not, and you might have already tried this, there is a way to reset your control unit. You probably tried this too, but there are several slot car forums where you might find others with this problem and a possible solution. I wish I can help. One other thing that came to mind, perhaps trying an outlet on a different breaker. Good luck, and if you do get it working, let us know.
Waiting patiently (not) for Carrera to get this item to their suppliers. I pre-ordered mine weeks ago, knowing they wouldn’t be available until at least early March, which is now, but still no word. I almost purchased single unit wireless controllers, and even wired, but managed to hold off. Don’t know how much longer I am willing to wait. Time will tell.
Yes it’s worth the wait I will never go back to wired
Nice Informative Video,Thanks Only Problem Is The Dtm Furore Set I Bought Does Not Come With The Track Adapter & Once You Want To Add The Pitlane You Need This Adapter As The Pitlane Is Right Where The Charging Base Is.