Is there a test mode where the sounders only go off for a few seconds? Sometimes the MCP is on the other side of the building and I don't want to leave it going off until I get back to the panel. Many thanks
Top man Dan, got to do a test on one of these baby's tomorrow,caretaker in a new block of flats so you've taken the pressure off for me thanks, yeah the music's too loud made my westie jump off the sofa lol, loved the slo-mo though, good job, much appreciated, subscribed.
hello good night I have a problem with a fire system, consisting of a central of the Hochiki brand model firenet 2127. the problem is the following, sl moment of doing its installation and programming a problem appears in the node of the central that in this case is 2, which indicates that it is disabled, it could help me by indicating what to do to eliminate said failure. Thanks
Hi i have a Scyncro AS system relabelled as a Control Master 110 how do you do a fire drill on one of these, our janitor has just retired and we have no instructions to follow. many thanks PS its linked to a response centre.
Our school has the same panel, except most of the devices are actually conventional because the building is very old. The reason the panel was upgraded was because an extension has been built which uses Hochiki ESP devices like the ones in this video
We have upgraded a few conventional systems with addressable like the Kentec Syncro AS but used zone monitors for existing conventional devices with the intention of upgrades when the client has the budget so that is fine providing the zones comply in terms of area or coverage.
We have Kentec Syncro AS panel fitted at the location as you there is a PC port (RS232) in the panel which used for system programming can you please provide me serial port data like Baud Rate, Number of Data Bits, Stop Bits, Parity?
Hi Dans, thanks a lot for the video as I just encounter an exact panel like this. Could you do a video of adding more HOCHIKI detectors/MCPs to the existing system and how to program the system? BTW, the music is as loud as fire alarm set off. I am kind of struggle between listening to you and silence the music.
Hi I have this at a school I’m caretaker at . Easy panel to use I put it in test mode to do weekly test as saves someone running back to the panel to silence
If you watch his videos he never tells you the Engineer codes just the basic user codes to reset the panel. (Note: he dodged your question).Try Google to add the items you want to this system or contact the manufacturers direct.
Akhil Gopika it is was displayed when the panel is auto learned but no other info has been programmed. So when a call point is activated or a smoke, does it come up with a location description or is it blank?
Shah Mehul you can add up to 126 devices but what's important is that you don't overload the loop! Always check the quesicent and alarm current of the devices you intend to use
Hii Haris Ansari here from Mysba solutions Pvt Ltd We are authorised master distributor for Hochiki You can contact us if you have any queries we are also supplying in Kolkata. Haris Ansari 9152999465 haris.ansari@mysba.in info@mysba.in Info.mysba@gmail.com
Hi there mate I hop you or u or ok mate see a good day today mate I hop you or u ok mate I hop you or u ok mate I hop you or u ok mate u or hove a good day mate u or u ok mate I hop you or u ok mate u you or u ok mate ok mate you hove a good day mate I hop you or u ok mate form Greg Bouchard
See my birthday on Sunday mate I hop you u or u ok mate I hop you u or u ok I hop you or u hove a good day mate you or ok mate I hop you or u ok Dan see a good day today mate
Let me know if you would like to see any specific demos on the Kentec Syncro AS panel
Dan it keeps going off and there's no sign of fire any idea why
Dans the Engineer yes mate
Apollo!
itznathyy hi there mate you or u ok mate see a good day mate
Dan can you do a what inside and behind the main board thanks
Is there a test mode where the sounders only go off for a few seconds? Sometimes the MCP is on the other side of the building and I don't want to leave it going off until I get back to the panel. Many thanks
Thank you. I have to test this exact system weekly
using the cargo hold smoke dectector system showing pre alarm trigger . checked the sensor tested ok. but no. 4 exhaust duct 2 alarm
Hi Dans, is it possible to check call point batteries from the syncro AS panel?
Top man Dan, got to do a test on one of these baby's tomorrow,caretaker in a new block of flats so you've taken the pressure off for me thanks, yeah the music's too loud made my westie jump off the sofa lol, loved the slo-mo though, good job, much appreciated, subscribed.
Great to hear ha thanks. Hopefully the Westie wasnt too startled.
@@DanstheEngineer she's registered clinically deaf now. 😊
@@jakmak1199 **** Disclaimer, I cannot be reasonable for the volume control on your device 🤣🤣🤣🤣
@@DanstheEngineer Can you ever do something on networked panels?
How to enable zone 1 on the kentac as panel
Yesterday I went to the Cosy cottage for dinner where I would go but I noticed it has the same fire alarm system!!
hello good night I have a problem with a fire system, consisting of a central of the Hochiki brand model firenet 2127. the problem is the following, sl moment of doing its installation and programming a problem appears in the node of the central that in this case is 2, which indicates that it is disabled, it could help me by indicating what to do to eliminate said failure. Thanks
What the default level 3 code for this panel
Hi i have a Scyncro AS system relabelled as a Control Master 110 how do you do a fire drill on one of these, our janitor has just retired and we have no instructions to follow. many thanks PS its linked to a response centre.
Do you have a maintenance company for the system?
Hi, appreciated if u can explain about "contamination status" function... thanks
How do you turn the volume down on the Hochiki sounder beacon bases? Don’t like it loud 😂
Our school has the same panel, except most of the devices are actually conventional because the building is very old. The reason the panel was upgraded was because an extension has been built which uses Hochiki ESP devices like the ones in this video
We have upgraded a few conventional systems with addressable like the Kentec Syncro AS but used zone monitors for existing conventional devices with the intention of upgrades when the client has the budget so that is fine providing the zones comply in terms of area or coverage.
Sir...how to deleting one address in apollo m8000 panel
I have hochiki hfp ap-as cont panel and repeater pannel hfp ap can you helpme out how to install and how to use repetar panek
I want to know how to operate this system
Hi..I want to know why always system fault alarm what does this mean?🤔🤔
Were is the link for the stuff at the end??
You can get them from FireSense fire alarm equipment supplier
www.firesense.co.uk/
Dans the Engineer what section
You have to call them
Dans the Engineer what about the usb and booklets
We have Kentec Syncro AS panel fitted at the location as you there is a PC port (RS232) in the panel which used for system programming can you please provide me serial port data like Baud Rate, Number of Data Bits, Stop Bits, Parity?
Which panel is next, would be cool to see the mxpro5000
Evan Stoker got quite a few requests for the MX Pro 5. You never know.... Might be next Tuesday
Dans the Engineer what devices are in the mx5000 system
Evan Stoker Apollo again.
Dans the Engineer I like Apollo devices, they're a good brand
Ev Fire Alarms I think they were the first devices I used. Good old XP95
How we stop resound
Key or code, silence, reset...
good morning my friend, i have a problem in my panel, it shows the loop 1 open circuit failure. what can this failure be?
is the loop connected to the panel by both ends, loop in and loop out?
Hi Dans, thanks a lot for the video as I just encounter an exact panel like this. Could you do a video of adding more HOCHIKI detectors/MCPs to the existing system and how to program the system? BTW, the music is as loud as fire alarm set off. I am kind of struggle between listening to you and silence the music.
Hey thanks. I may create more fire alarm videos soon. Thanks for the comment about the sound 😀
Hi I have this at a school I’m caretaker at . Easy panel to use I put it in test mode to do weekly test as saves someone running back to the panel to silence
If you watch his videos he never tells you the Engineer codes just the basic user codes to reset the panel. (Note: he dodged your question).Try Google to add the items you want to this system or contact the manufacturers direct.
Believe your level 3 should be 2222
So is the code on all 2222?
By default yes... Unless it has been changed.
Can u do a demo on a Gent Vigilon panel pls
Random Ytuber I haven't done one yet but I will see if I can do one. Do you use much of Gent?
No, not really but I like the S Quads especially the ones that have speech
You forgot to add the link to the kits
Hello, please want a setup guide for APOLOO 8000 A80161M3
Thank you brother
Sir.. Am akhil
Am not a techion
"Auto configured panel "
This msg showing in this same panel..
wat is tht?
Watz the prblm?
How to clear that..
Akhil Gopika it is was displayed when the panel is auto learned but no other info has been programmed. So when a call point is activated or a smoke, does it come up with a location description or is it blank?
access level 3 password can you update i tried with 3333 but not works for me
.cant download the data from panel .
Please tell how to erase data on this panel...
Shah Mehul what data do you mean?
Like memory we scanning ...
Also please tell me per loop 126 device working perfectly or not ... Genuinely...
Shah Mehul you can add up to 126 devices but what's important is that you don't overload the loop! Always check the quesicent and alarm current of the devices you intend to use
Dans the Engineer
Thanks you sir...
I love kentec syncro a s
This is the fire alarm I have and it went off yesterday due to my roommate in school spraying the detector
🤤 what did your room mate spray it with?
Dans the Engineer he sprayed it with deodorant
Euan Griffiths yeh! That'll certainly set it off. It's not great either because deodorant will leave a liquid residue on the device.
Dans the Engineer it faults now and again sometimes the red lights come on to show its activated but it doesn't sound any reason why
Dans the Engineer some in my school aren't sounding either have no idea why
can you confirm its price for Bangladesh.
Hii
Haris Ansari here from Mysba solutions Pvt Ltd
We are authorised master distributor for Hochiki
You can contact us if you have any queries we are also supplying in Kolkata.
Haris Ansari
9152999465
haris.ansari@mysba.in
info@mysba.in
Info.mysba@gmail.com
Our head office is in Kurla, Mumbai
@@ansariharis1430 if i am going to Kolkata can i found it
If possible call me or give your number
😀
😚
Apollo and hochiki
Hi there mate I hop you or u or ok mate see a good day today mate I hop you or u ok mate I hop you or u ok mate I hop you or u ok mate u or hove a good day mate u or u ok mate I hop you or u ok mate u you or u ok mate ok mate you hove a good day mate I hop you or u ok mate form Greg Bouchard
See my birthday on Sunday mate I hop you u or u ok mate I hop you u or u ok I hop you or u hove a good day mate you or ok mate I hop you or u ok Dan see a good day today mate