I have s new brother printer with cartridges lc3217 etc lc3217 was low so I couldn't print so I decided to have a go at filling up the little ink window atbthe top of the cartridge I drilled a small hole filled and the printer recognised it as full even though there are chips on them I filled the rest of the cartridges and all are full no questions asked from the printer or errors saved my lots of money £50 for a cartridge resetter
At first I was thinking, "WOW!! This working great!" Then it started leaking...and kept leaking and leaking. It seemed it leaked more than I added. What causes the leak?
You added too much that is what caused the leak there is a regulator inside it to prevent it from filling too much so it leaks out the excess. just let it sit in a disposable bowl for 24 hours or till it stops leaking.
Get more life out of your Inkjet Cartridge. Prop the front of the printer up by about 5 cm (some books are good for this) causing the ink to run to the rear of the cartridge and get extra value but fill the bottom tray with paper first. For Yellow Cartridge, use a Black Marker to ink over the window (half way up the side that the nozzle is located) to fool the printer into thinking the cartridge is still full and allowing you to extract the extra remaining cc's.
I just tried this. I could not get the glue to go into the hole because it was too small and also I could not smooth the glue like you did. Will this still work? I also was wondering if the detection will still work out right because the glue is not smooth. Where are the detectors? It seems like a way for the the manufacturers to just make money by having the detectors turn off when the cartridges are still filled.
Nice full of ink drop out from the bottle and full oof hands filled with black. *THUMBS UP* and the ink doesn't go inside as well. And I have to wash the cartridge. Guess what there's a bit of water inside. What the heck. Guess what, when I put it since they cant detect the ink, Noice. :DDDDDDDDDDDDDDDDD
That voice and the music in the background makes it sound like he's showing you how to neutralize a bomb
Hahaha, I know what you mean. I don't know why he chooses to use the computer to speak for him.
I have s new brother printer with cartridges lc3217 etc lc3217 was low so I couldn't print so I decided to have a go at filling up the little ink window atbthe top of the cartridge I drilled a small hole filled and the printer recognised it as full even though there are chips on them I filled the rest of the cartridges and all are full no questions asked from the printer or errors saved my lots of money £50 for a cartridge resetter
was able to refill an LC3011 cartridge...it didn't have an air bleed valve...but... it works by golly...👍
At first I was thinking, "WOW!! This working great!" Then it started leaking...and kept leaking and leaking. It seemed it leaked more than I added. What causes the leak?
You added too much that is what caused the leak there is a regulator inside it to prevent it from filling too much so it leaks out the excess. just let it sit in a disposable bowl for 24 hours or till it stops leaking.
Why didnt you use the syringe in the first cartridge?
Get more life out of your Inkjet Cartridge.
Prop the front of the printer up by about 5 cm (some books are good for this) causing the ink to run to the rear of the cartridge and get extra value but fill the bottom tray with paper first.
For Yellow Cartridge, use a Black Marker to ink over the window (half way up the side that the nozzle is located) to fool the printer into thinking the cartridge is still full and allowing you to extract the extra remaining cc's.
Good video but I can’t open one of the side of the cartridge. The part with the big plastic side from where the ink comes out.
How do you chip reset LC401 ink?
I just tried this. I could not get the glue to go into the hole because it was too small and also I could not smooth the glue like you did. Will this still work? I also was wondering if the detection will still work out right because the glue is not smooth. Where are the detectors? It seems like a way for the the manufacturers to just make money by having the detectors turn off when the cartridges are still filled.
hi. liked your video. can you recommend brother printer for home use with cartridges that dont have a chip and are easily refillable?
thanks.
Thank you Brother !
I jave an epson ink can i use it with lc39 cartridge
Yes
If you refill up before cartage is empty will that reset the chip ,let's say keep full around half empty
These old Brother cartridges don't have chips. As long as you have ink in it, it's gold.
@@BCHTechnologies
I have lc3011 which has a chip
Use with "DIY Inkjet printer head cleaner,simple,cheap,effective" solution and save €€$$
cool
did I hear North Carolina?
Well, thanks to you, I almost ruined my cartridge.
Nice full of ink drop out from the bottle and full oof hands filled with black. *THUMBS UP* and the ink doesn't go inside as well. And I have to wash the cartridge. Guess what there's a bit of water inside. What the heck. Guess what, when I put it since they cant detect the ink, Noice. :DDDDDDDDDDDDDDDDD
what the fuck