Many thanks for this video, all I can say is brilliant and fantastic. Will be making a start on the project in the morning. Please keep these projects going. Russell from Newcastle UK.
Th Hello, Congratulations for the desing of the kite . The draw of your kite is it available ? Where can we find the files for the printed parts ? Can you furnish a kit of the kite ? Thank a lot.
Many thanks for this video, all I can say is brilliant and fantastic. Will be making a start on the project in the morning. Please keep these projects going. Russell from Newcastle UK.
bonjour , belle presentation et beau projet , je vais assayer de faire un modele,merci pour le partage
You're welcome, thanks for your reply.
Exallent 👍👍..
Thanks, You inspire me a lot!
You're welcome, thanks for your reply.
Th
Hello,
Congratulations for the desing of the kite .
The draw of your kite is it available ?
Where can we find the files for the printed parts ?
Can you furnish a kit of the kite ?
Thank a lot.
Is available.
3D STL FILES:
supr.link/zovfc
supr.link/NmAI1
supr.link/xifzB
kite file cannot open. file damaged. many times download still corrupted
My test is normal, it may be a different country, you can write to my e-mail, I will mail it to you, thank you!
謝謝分享，很有趣呢，，請問 碳纖棒可以用膠條代替嗎？另外那"膠布"可用剪開的垃圾袋代替嗎？ 因我不知那 nylon fabric 在那找到。
膠條太軟 強度和硬度都不夠支撐 垃圾袋容易受外力破裂 軔性不夠 尼龍布抗拉扯 比較不會破
@@angelrc9869 thank you for reply, 我找找看，:p
請問 需要做偏角嗎
不用 這馬達的方向上下左右是可以用遙控器改變的 要偏角就用微調的就可以了
@@angelrc9869 好的 謝謝你！
Where is the centre of the gravity?
approximately at the junction of the vertical and horizontal rods
After a few tweaks I finally maiden my kite... Thanks...
可以請教一下電裝的配置嗎？
影片下方有註明呀 按一下 更多內容
有找到了，謝謝
請教一下，遙控車的遙控器能接遙控飛機的電刷跟馬達嗎?
@@kenkuo7852 對不起 我沒有玩過遙控車 只要輸出可以接一般的伺服機 應該就可以 不過此機要用混控功能 才能正常操作 謝謝！
我是打算用遙控車的控制器做一台雪地車給小孩玩，因為只需要2動，就馬達跟方向，但是接上去卻是按鈕在控制馬達，那就只有開關沒能控制轉速。