@@brazillady5119 Look at the pliers at 4:08 then look at them at 4:47 -- then look again at 5:28. Somehow all the pitting and scratches are gone in the bit at 4:48, part of it is an entirely different color, and the engraved wavy hexagon surrounding the double spade is suddenly text in a circle.
Yes, the one pulled out of the rust remover has a different logo and coloration and looks practically new but then it's back to the original when it's being worked on. Maybe a footage snafu?
Why not just find a busted up pair of Pliers to work on instead of throwing a set in a fire, artificially rusting them then switching out heads? It would be a better video for sure. Wonder what he used to make the "Rust Remover"?
Not going to lie, something about this video makes it seem like it's not the most... honest video I've seen from you. But with each video I watch of these, I'm learning more and more. I watched all the way through regardless, so keep up the good work I suppose.
Your videos are very much enjoyed, I think that with the talent you have as a craftsman, you should put together your tools and use them. I hope you keep progressing and you can improve day by day, greetings
Rust was oozing out of the plier heads when loosening it with WD40. It's kinda more advisable to separate them before the initial rust removing but it may not be possible in some cases.
What do you mean with "fully destroyed"? It wasn't. It was filthy, but you could have had it clean and functioning in 10 minutes. The rest is cosmetics.
I think the rust was kinda fake, soaked it in some kinda rusting agent to make it look worse than what it actually was. Not a big fan of this kind of tricks.
Есть такие пассатижи. Венгерские но с цельными ручками. В черной пластмассе. 400 вольт изоляция. Мощная штука. И зажимают ровно. Но зев маловат. Поэтому используются редко. Нашел в ручье когда шел на гараж. Были ржавые и закисшие . расквасил расшевелил и почистил. Но не так конечно как тут их вылизали за каким то х..ем))
Everything done bare hand with no safety gloves. Only we indians have the reputation of doing so. Playing with chemicals bare handedly. We have right tools but lack right attitude
Еще и обжег похоже. Уж что то шлицы у них сильно свежие и нет сколов и царапин глубоких от постоянного использования. Хотя я такие венгерские сам нашел в гаражах. в ручье торчали из земли. Случаянно заметил их. Ржавые были и закисшие но ручки целые. Почистил, расшатал . состояние как у новых не считая окисленной внешности.
Very good. In wasting every thing. Good
👍Хорошая работа!
Fantastic 👏great job 👍
Those came out Great! I want a pair.I'd buy those.
Amazing how when you pull the pliers out of the rust remover, you can see a completely different logo engraved on them than what you finish with.
I smell a rat. This guy has pulled this stunt before.
It looked the same to me. What am I missing?
yep..different plier head
@@brazillady5119 Look at the pliers at 4:08 then look at them at 4:47 -- then look again at 5:28. Somehow all the pitting and scratches are gone in the bit at 4:48, part of it is an entirely different color, and the engraved wavy hexagon surrounding the double spade is suddenly text in a circle.
Yes, the one pulled out of the rust remover has a different logo and coloration and looks practically new but then it's back to the original when it's being worked on. Maybe a footage snafu?
Why not just find a busted up pair of Pliers to work on instead of throwing a set in a fire, artificially rusting them then switching out heads? It would be a better video for sure.
Wonder what he used to make the "Rust Remover"?
@Sowneyy 7.62 agreed
I was going to say the same thing
he uses natrium as "rust remover powder"
@Sowneyy 7.62 ئئئئئئئئئئئئئ
Sr. Restaurador, congratulações, Very Very Good.
ماشاءالله عليك👍👍👍👍
Wowwww Amazing Video
Very nice
Not going to lie, something about this video makes it seem like it's not the most... honest video I've seen from you.
But with each video I watch of these, I'm learning more and more. I watched all the way through regardless, so keep up the good work I suppose.
Good job but suggest you wear protective gear when operating power tools.
This video deserves 1 million like
Ficou perfeito parabéns
Fully Destroyed ? The thing is in quite good condition actually. It doesn't look exposed to rust and abuse at all.
awesome work
More than pliers is a professional work of art congratulations ...

Your videos are very much enjoyed, I think that with the talent you have as a craftsman, you should put together your tools and use them. I hope you keep progressing and you can improve day by day, greetings
Wow nice end result, cool video👌👌
Such good pliers need to bite the gold wire) good job man
Amazing work this plier is different from other and it looks easy to work with this tool
DUDE! The only way that pair of pliers stayed together before restoration was prayer and good thoughts.
Super tare
Great restoration, should definitely try etching the steel or gun blueing them next time to make that logo pop
I once saw something similar in the bilge of a submarine.
عاشت أيدك استمر حبيبي
i like the colour of the handle and its shiny always put different colour for the handle nice restoration keep going
Too many people have to many critical things to say instead of just you did an amazing job! They look great.
You have good control of the grinder. Very impressive not to go too much.
This is not "extremely" rusted... Actually it is in a very good condition except for the rubber handles.
Miracolo............. 👍
Really nice work. Think of using gloves and clean areas. That makes your work more interesting. Well done
Nice to have
Nice work, great stuff, thanks for sharing 👍
Good job💜💜
Rust was oozing out of the plier heads when loosening it with WD40. It's kinda more advisable to separate them before the initial rust removing but it may not be possible in some cases.
You switched the pliers. Also are supposed to put the pins for the handles in the head holds after the head is in place. Shenanigans.
Wow there beautiful great job
Hello bro i'm every day see a video of you becouse is relaxing,you record the videos very well and work,of coures ...i wish you luck!!!😉😉😉
Amazing!!!! 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼
Better than new!
Good job 👏
Thank you for a very enjoyable video. It's appreciated.
I want my toothbrush back when your done with it! 😁
Nice
NEW PLIARS DOESNT SHINE THIS MUCH BUT MR.TOOL'S RESTORED ONE WILL SHINE AND GOOD LUCK OF NEXT VIDEOS
wowwww men!!!! i really apretiate your work....
What were you sprayinfg on that mudy handle
Fake ! Thrown in the fire first and then cleaned up. LOL.
W40 debe salir 50 centavos en su país.
Muito bom gostei
So meditative.
That is an incredible restore
Fully destroyed is when you have a pot with metal powder and you'll have to cast new pliers out of it.
A true work of love, and do you own stock in WD40, if not buy some you'll need it.
I think it's artificially rusted to make video... It looks new when rust cleared
Yes, sir...I would not go that far but definitely they were NOT as rusty as made to appear!
Trying to fool.
Dump him.
Could not agree more...definately it has been burned.
The brushed metal looks way better than the shiny chrome finish
I can't help but wonder if you have pulled a sneaky like that one in your previous videos.
Why waste so much wd40 when you can easily work with much much less?
He likes the smell. Don't you?
What do you mean with "fully destroyed"? It wasn't. It was filthy, but you could have had it clean and functioning in 10 minutes.
The rest is cosmetics.
Then what would be the point in the video lol
@@danielthompson743 Granted, not much 😁
Which powder you use to remove rust
Excellent work, detailed, methodical and capricious. Congratulations and thanks for sharing.
nice g vdio restoration
新品同様になって、なんだか嬉しいw
Good work. I enjoyed every second of this video 🙂
I think the rust was kinda fake, soaked it in some kinda rusting agent to make it look worse than what it actually was. Not a big fan of this kind of tricks.
Agreed. It looks like there is far less pitting for that kind of rust and age.
I was like... why is he gluing this handles with hot glue. But then... ah yes :D greetings from Poland :)
Видно, что инструмент был новые его принудительно окислили и измазали в говне для видео, а теперь типа восстановили.
Есть такие пассатижи. Венгерские но с цельными ручками. В черной пластмассе. 400 вольт изоляция. Мощная штука. И зажимают ровно. Но зев маловат. Поэтому используются редко. Нашел в ручье когда шел на гараж. Были ржавые и закисшие . расквасил расшевелил и почистил. Но не так конечно как тут их вылизали за каким то х..ем))
За ручки конечно лайк. Хотя в обычной жизни я бы набил другие и не парился)))
Хотел тоже самое написать слишком ровные грани для старого инструмента
شجشج
Did you not consider welding necessary before removing the dent?
Where do you get the rust remover powder
Zabrdast...
why bothering with the dents on the handles when you are using epoxy? But still a very nice job.
What is that powder you used for rust removal? Oxalic acid?
Where did you get those little river things that you put the clip under? I want to make a clip for my wire strippers
Всё здорово и красиво, но как всегда, "сапожник без сапог" реставратор со ржавым инструментом.
Amazing!!
Perfect!
Great job, but whats the use of them ?
Everything done bare hand with no safety gloves. Only we indians have the reputation of doing so. Playing with chemicals bare handedly. We have right tools but lack right attitude
Qm e Br deixa like
👇👇😂
I wish you'd reveal just what products you are using to clean this up, the info would be useful.
Мне одному кажется, что он сам состарил инструмент?
Именно. Сейчас таких куча. Закинут разного в ведро с солью, а потом типа отмывают и востанавливают.
Еще и обжег похоже. Уж что то шлицы у них сильно свежие и нет сколов и царапин глубоких от постоянного использования. Хотя я такие венгерские сам нашел в гаражах. в ручье торчали из земли. Случаянно заметил их. Ржавые были и закисшие но ручки целые. Почистил, расшатал . состояние как у новых не считая окисленной внешности.
Wow
it's stupid to clean surface dirt wd40
nice 🇮🇶
He was using rusty pliers to hold the new one
Anybody is watching pls watch in 1.5X speed 🙁
What is substance of the rust remover bowder and the liquid ?!
that's not rust remover powder, its baking soda and the liquid is vinegar
The holes on the inside, I think there is supposed to be a spring there!!!
👍👍👍👍👍👍👍👍👍👍👍
🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗♥️♥️♥️🤗
I purchase new one
Hello I Karina you kukukuku
Why dont you wear protective gloves?
Restoration + 5 cans of WD40,🤣🤣🤣
You aren't scare to empty Wd40s can !!!
I think you destroy tools on purpose, to make the videos ...
not a good thing to polish tools they should be satin finished or better if blued
you do such a good job restoring, but why the butt ugly handles??
Koi muqabla nhi kar sakta aapka