I'm surprised the blade hasn't broke from the saw dust getting between blade and wheel. Yes that dust shoot needs a better exit in it. Looks like it cuts right along. Thanks for sharing
I'm a little jealous about this one cause it has the new self locking raising and lowering handle.It's looks to be a cross over with lm2000 and the hd36 manual.Seems to like a lot of fixtures are copied from 2000 to 36 and some are not there such as the stoppers that the 2000 has.So I guess a New mill on the board ;-) .
New Feature: Sawdust collection system. ;-) I'm cringing waiting for the far side of the sawmill to fall off the stringers...note the foot at the end hanging on for dear life by the end of the video.
The sawdust exit was placed in the bottom of the housing so sawdust coming off the blade hits a blind, vertical wall and has to fall down through the exit holes. I have not seen this on any other mills. I understand Norwood has added new holes and enlarged existing ones as a design fix.
I have been satisfied with the accurate cutting of the mill and pretty much everything over all. The bolts that hold the track together must be hand tightened I used a impact drill driver to speed up the process and ended up stripping some of the nuts out, not a BIG deal just put in some others I had. I did have an issue with some of the blades coming off but after getting more cut time I think I have that figured out. Getting the tracking set right and the right blade tension are the key. Also knowing when the blades get dull and not to push to hard through the wood. It like anything else you have to get use to the machine and learn how to operate it. I got the mill as a hobby but one month after having it I made $700 on one job cutting some 3/4'' pine boards for a friend. It is for sure not a production mill for everyday use but for a hobbyist, I like it. Hope this helps!!
Thank you! I was wondering how to precisely set the blade tension. For example, the Woodland Mills sawmills have a nut on their tensioner crank that should be torqued to specification, but I didn't see that on the OS27. Just have to feel it out?
It is weird the OS27 manual says to bottom out the t-handle until it hits the spacer behind the tension spring for proper adjustment but watching the videos form norwood they say about 4 to 5 turns after taking the slack out. I called Norwood and talked to Trevor and he agreed you just kinda have to find that sweet spot. They have been helpful when ever I called them, good luck in what ever direction you go.
i have a timbery m280. i was looking qt the os27 because of the price and what get for it. logosal has a great idea with their bandsaw sawmill. the wheels look like fan blades. to throw the saw dust. looks like it would work very good. i have same issues with my timbery m280 but it don't look as bad
Everyone can complain all they like...nice little unit! I'd take a unit to use for building the Earthship Biotecture style home my wife and I are going to build...I have to transport logs from Tahoe area though.
Hi. WE HAVE BOUGHT A OS.27..STILL IN BOX.. SEEING YOURE FILM ID BE RATHER BOTHERED THE WAY THE WHOLE FRAME MOVES AS A LOG IS ROLLED ON THE WAY IT BUMPS ON LOOKS AFTER A FEW HARD ROLL ONS IT COULD COLLAPSE... WE HAVE NOW ORDERED A TRAILER TO MOUNT THE SAW ON... IT WILL HAVE TO BE A STRONGER TRAILER THAN YOU SEE USED IN THE U.S.A. ..AS THE AUSTRALIAN GOVERNMENT WONT ALLOW THEM ON THE ROADS HERE.. HOPE YOU DONT MIND ME SAYING SO.... WE ARE IN N.S.W. AUSTRALIA.. TEN YEARS NOW SO STILL USE THE BRITISH E.MAIL ADDRESS AS IT STILL WORKS O.K.... HAVE A GOOD CHRISTMAS BOYS...DAVID..
Come on guys to theatrical you're not running a production Mill you're running a hobby meal running around like your chickens with the heads cut off I mean really come on way too intense for what it really is
That jam with the sawdust would drive me nuts. No way.
I'm surprised the blade hasn't broke from the saw dust getting between blade and wheel. Yes that dust shoot needs a better exit in it. Looks like it cuts right along. Thanks for sharing
I'm a little jealous about this one cause it has the new self locking raising and lowering handle.It's looks to be a cross over with lm2000 and the hd36 manual.Seems to like a lot of fixtures are copied from 2000 to 36 and some are not there such as the stoppers that the 2000 has.So I guess a New mill on the board ;-) .
New Feature: Sawdust collection system. ;-) I'm cringing waiting for the far side of the sawmill to fall off the stringers...note the foot at the end hanging on for dear life by the end of the video.
Wow, this thing needs a plasma cutter included so the new owner can cut a sawdust chute in it.
The sawdust exit was placed in the bottom of the housing so sawdust coming off the blade hits a blind, vertical wall and has to fall down through the exit holes. I have not seen this on any other mills. I understand Norwood has added new holes and enlarged existing ones as a design fix.
Maybe a little expanded metal in the right places.🤔
Norwood did address this as my OS27 has side holes in to allow good flow.
Hi Paul. Since you're an owner, can you tell me if the cut thickness is accurate/consistent? Any complaints? Thanks.
I have been satisfied with the accurate cutting of the mill and pretty much everything over all. The bolts that hold the track together must be hand tightened I used a impact drill driver to speed up the process and ended up stripping some of the nuts out, not a BIG deal just put in some others I had. I did have an issue with some of the blades coming off but after getting more cut time I think I have that figured out. Getting the tracking set right and the right blade tension are the key. Also knowing when the blades get dull and not to push to hard through the wood. It like anything else you have to get use to the machine and learn how to operate it. I got the mill as a hobby but one month after having it I made $700 on one job cutting some 3/4'' pine boards for a friend. It is for sure not a production mill for everyday use but for a hobbyist, I like it. Hope this helps!!
Thank you! I was wondering how to precisely set the blade tension. For example, the Woodland Mills sawmills have a nut on their tensioner crank that should be torqued to specification, but I didn't see that on the OS27. Just have to feel it out?
It is weird the OS27 manual says to bottom out the t-handle until it hits the spacer behind the tension spring for proper adjustment but watching the videos form norwood they say about 4 to 5 turns after taking the slack out. I called Norwood and talked to Trevor and he agreed you just kinda have to find that sweet spot. They have been helpful when ever I called them, good luck in what ever direction you go.
i have a timbery m280. i was looking qt the os27 because of the price and what get for it. logosal has a great idea with their bandsaw sawmill. the wheels look like fan blades. to throw the saw dust. looks like it would work very good. i have same issues with my timbery m280 but it don't look as bad
Sounds like a great idea.
Everyone can complain all they like...nice little unit! I'd take a unit to use for building the Earthship Biotecture style home my wife and I are going to build...I have to transport logs from Tahoe area though.
Can not believe that there is so much sawdust coming out of the opposite side also .have to leave the bottom plates off
A bit of a fail construction how the sawdust gets caught in the blade housing, but nice saw
How could a manufacturer not test it to see the dust collection problem before showing it in public?
ADD a winch to the log stand(rack)?
Great saw and machinery! Going so fast..looks like an accident waiting to happen...they made it work though..
right?! "Let's have a race" and equipment that can saw you in half doesn't seem like a good combination.
Very nice
Cuts awesome how much is that mill ?
Green horns blowing sawdust On their lumber
Hi. WE HAVE BOUGHT A OS.27..STILL IN BOX.. SEEING YOURE FILM ID BE RATHER BOTHERED THE WAY THE WHOLE FRAME MOVES AS A LOG IS ROLLED ON THE WAY IT BUMPS ON LOOKS AFTER A FEW HARD ROLL ONS IT COULD COLLAPSE... WE HAVE NOW ORDERED A TRAILER TO MOUNT THE SAW ON... IT WILL HAVE TO BE A STRONGER TRAILER THAN YOU SEE USED IN THE U.S.A. ..AS THE AUSTRALIAN GOVERNMENT WONT ALLOW THEM ON THE ROADS HERE.. HOPE YOU DONT MIND ME SAYING SO.... WE ARE IN N.S.W. AUSTRALIA.. TEN YEARS NOW SO STILL USE THE BRITISH E.MAIL ADDRESS AS IT STILL WORKS O.K.... HAVE A GOOD CHRISTMAS BOYS...DAVID..
No sawdust chute at all
Why are yall in such a hurry?
It was a race
Set upan air blower to blow the saw Dust out I think the Woodmizer is a better machine
Valor R$?????
Comment l'avoir au rd Congo Kinshasa ? Et le prix de tours
Ici en France ça coût presque 8000€
Did I see the helper put his hand under that log right on top of the saw table? Not to damn smart.
What is wrong with that machine ?
Go back to the drawing board.
Good machine give me delivery in nepal
The operator and the helper don't know how to work as a team.
Saw dusts stuck inside the sawmill's body is a design flaw...
I just use a leaf blower to clear it without opening. Quick and simple, blow backwards into the chute.
ce n'est pas normal d'être Obligé de nettoyer l'intérieur du protecteur toutes les 5 minutes!!!
Si un jour j’en achète une , je les modifierais .
You catter mashin price
Mnauzaje mashine hii
Come on guys to theatrical you're not running a production Mill you're running a hobby meal running around like your chickens with the heads cut off I mean really come on way too intense for what it really is
I was at this shoot out and the Lucas Mill beat every one.
This must be the worst product presentation in history ... after Bill Gates' Windows 98 fiasco, of coure ...
Well that one is eliminated, too bad they forgot that a mill produces sawdust. Looks like a closed system.