Compensating winding is embedded in the slots in pole faces. It is connected in series with the armature winding so that their mmfs are proportional to the same current
Nice session 😊..... please continue these series & make videos on synchronous machines, 3 phase induction motors, power system ( generation, transmission & distribution) , measurements
Sir 124 no question you use shunt generator formula but the question mentioned that is a short shunt generator for that the question data is incomplete because series resistance isn't mentioned but i assume that the series resistance is also 0.1 ohm and for that the answer this question is 272 volt approximately.
Sir I have a exam 16/10 /2022 there before you make a electronic MCQ question session I am very helpfully please sir make a question answer session . I am flowing you're Chanel and seen every video I understand easily what ever you're explain.
In question 116 condition for max power in case of dc generator is Vt=Ea/2 So all option are wrongly given According to me it is the question of dc motor
Sir SSC JE ki power system ka Generation, Transmission & Distribution ka alag alag video banaiye na sir ji please 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
Q57. The dynamic breaking is generally used with DC motors..d) All options are correct...
[a) series, b)shunt, c) compound]
Q57. The dynamic braking is generally used with series , shunt , compound dc motor.
Compound
108 ans...in
Series with the winding.
Compensating winding is embedded in the slots in pole faces. It is connected in series with the armature winding so that their mmfs are proportional to the same current
1
Braking system .
1.regeeative .
2.dynamic .
3. Plugging .
4.rheostatic
Thankyou so much sir mra ya vedeo Dhaker ker slaction ho gya 🎉 thanks 🙏 sir ji
Congratulations, Kindly Contact on 7741063663
Congratulations brother
Drooping characteristic is made between armature current and load terminal
Regenerative breaking me - over hauling condition me hoga .
Dynamic braking - at separately excited condition .
Regenerative braking - me overhauling hoga .
Dynamic braking - at separately excited condition .
Plugging has highest braking torque
Bahut achhi content de hai sir aapne
Thank you
Thank you so much Alok, Stay tuned.
Mind blowing session sir please sare chapter k previous year k sare que ishi trh se ek ek video me lkr aaiye🙏🙏mja agya sir g
Motor ke braking me - 4 type hote hain .
Regenerative .
Dynamic .
Plugging .
Rheostatic breaking hoga
Thank you so much sir🙏🙏🙏...You are doing great job.... we're very grateful to you...💕
So nice of you
Thankyou so much sir
,
Dc motor -speed torque .
Dc generator -open curve .alternator v tha induction motor -circle diagram
In wave winding -no of parallel path -2
Superb session ❤
Q57) Dynamic braking is used in all DC motors Sir
Great session
U r great sir🙏
In DC machine shunt resistance is high and armature resistance is low for for more current in armature
The speed of DC shunt motor is more than full load it is possible by reducing field current
Armature copper loss is variable loss because armature current change acording to load - so armature loss is variable
Because motor can be act as generator and motor can be used as generator so regenerative braking are used .
Thank you sir helping us a lot
Regenerative braking applied in overhauling characteristics
Thank you sir 🙏🙏🙏 you are great
Regenerative braking wo hota hai jisme motor aur generator ko vice versa ke roop me istemal kar sakte hai
Nice session 😊..... please continue these series & make videos on synchronous machines, 3 phase induction motors, power system ( generation, transmission & distribution) , measurements
4 point starter is used in motor not to improve current on hold on coil
Variable loss of DC shunt motor is armature copper loss .
Variable loss is copper loss
Sir 124 no question you use shunt generator formula but the question mentioned that is a short shunt generator for that the question data is incomplete because series resistance isn't mentioned but i assume that the series resistance is also 0.1 ohm and for that the answer this question is 272 volt approximately.
Nice Video...... Thankyou Sir❤
Commutator are made up of soft copper and commutator sagment made up of hardened copper
Thanks sir aese hi sare chapters ke marathon upload kar dijiye itna achha session ki koi mcq book ki jarurat nahi thanks
Nice explanation, with full of energy & dedication
Thank you so much Rahul, Kindly DO Share this session with your friends.
If supply polarity of armature reverse then this condition is called plugging
When DC motor connected to ac supply power factor will be low due to high inductance of field and armature
Got selected for pstcl je.... Thanks to Eng Mcq channel
Hiii
In DC motor jo hawa ke karan loss hota hai wo square of armature current hota hai
DC machine follow - torque vs speed characteristic
Please provide more marathon session for ssc...it's really good 😊👌
Sir Question no11 me Maximum fulx trailing pole tip pe hota gai and minimum flux leading pole tip pe
!note 58:29 59:36 1:00:32 1:02:14 1:02:59 1:03:19 1:04:52
Very Very very thank you Sir. You are "Great Sir"
Sir 🙏🙏individual topic wise marathon video layea..
Plz sir.
SSC je exam ke liye kam time hai?? 😢😢😢😢😢
Dc motor -speed torque .
Dc generator -open ckt
Nice seson sir measurement bubject MCQ chia
Please bring basic electronic mcq class. In one video total electronic should be revised
Question number -11 me maximum flux trailling pole tip hota hai..
Shunt DC machine follow dropping characteristic .
Overhauling characteristic me regenerative brake use hota hai
Alternator -v curve
Thanks a lot ❤
Nice session 😊
❤❤❤very good sir je
Q63 field current direction bhi to same rahta hai.
Thank you 👍👍
Drooping characteristic is the phenomenon of shunt machines
Sir iski pdf milsakta hai kya???amazing work.
Q108) The commutating pole winding is connected in series with the armature winding
Great content
Thank you very much sir 🙂🙂😊
Pls keep continue more videos
Sure 👍
Very very good g
Sir I have a exam 16/10 /2022 there before you make a electronic MCQ question session I am very helpfully please sir make a question answer session . I am flowing you're Chanel and seen every video I understand easily what ever you're explain.
Questions no 31 sir d hoga ki a plzz correct me if i m wrong
Sir uppcl tg2 ke liye objective practice ke liya batae 🙏🙏
Very useful sir tq🤗
57.D,108-C,124-B,155-A
Very thank you sir... For your guidance 💐
Esi tarah dc theorems, AC fundamentals kay bhu questions lagayie sir. 😊
Very nice sir
Thanks and welcome
SIR SSC JE KA ANALOG & DIGITAL ELECTRONIC & powersystem K PYQ KB LAIYEGA PLZ REPLY ME SIR❤❤🙏🙏🙏🙏🙏🙏🙏🙏🙏
Battery charging will done by shunt generator toy me capacitor motor use hota hai
induction and syn ke bhi krwa dijiye sir
DC generator has slightly drooping characteristics
Sir dc shunt motor se sabse jade mcq h ..shunt motor ke special mcq ki alg se class laye ....
Sir, Special Type Of machine ka lecture ya previous year SSC je ka questions karwaiye ....🙏🙏🙏.....
Sir ji thankyou so much 👍👍👍🙏🙏🙏
26:24 Q35 cranes and hoist uses DC series motor i think wrong questions mentioned
Correct Mistakenly it has been explained as DC Shunt Motor Shivam. Current It has been omitted for now. Stay tuned.
🙂🙂ysss
Mast question
So number of brush in wave winding 2
Commutating pole in series with armature winding
Shunt generator are used for battery charging
57 all motor..
Thank you sir. Mahatransco k bhi sessions upload kijiye sir plz
Sure Manali.
In question 116 condition for max power in case of dc generator is Vt=Ea/2
So all option are wrongly given
According to me it is the question of dc motor
Sir SSC JE ki power system ka Generation, Transmission & Distribution ka alag alag video banaiye na sir ji please 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
Motor controller me most convenient thing toggle switch hai
Very fantastic session thank u ❤❤❤ sir...
Thnx sir
sir contenw oploded sir plzz🙏
superb
Sir gate ke previous paper bhi solved kra dijiye
thank you so much sir
🙏🙏
Thank you sir for your support and love 🤗
So nice of you
Estimating costing MCQ marathon hoga to atcha hoga
Very helpful hpssc exam session
Diarchy aya tha - during chames Ford
Completed 👍
Sir,
Any update on transco? Exam date
Sir please Provide Full session for SSC jE previous year Power System Questions
🙏🙏🙏🙏🙏
Sir Q11. ans is maximum flux in Trailing Tip Point ..
For dc generator
36 question ans b sir
Q155)-a)230V with brush polarity reversed