ESP32-CAM Face recognition based attendance system test 1
ฝัง
- เผยแพร่เมื่อ 7 มี.ค. 2020
- works so-so
-code--
fr partition is required (robotzero.one/esp32-face-door... )
arduino and google scripts code
github.com/unreeeal/FaceAtten... - วิทยาศาสตร์และเทคโนโลยี
How would you read the info in a cell and display it on the serial port on the Arduino?
can you make a step by step tutorial?
I copy your board.txt to esp32>1.0.4 and copy "rzo_partitions" to tool>patitions then I choose module AI Thinker esp 32 cam, Face recognization but it still get a mistake fr_flash: not found. Can you help me why i have a mistake?? Thank your help!!!
I'm able to stream the video but when I on face recognition , the video is getting stuck...I'm not able to enrol my face....any solutions..
Can you please provide guidance for me to do this project
Hey mate,
I wonder if I can only use face recognition function and trigger a LED light
Thank you for your help
Hi,
yeap, the built-in LED uses pin 4
you can use
digitalWrite(4,HIGH);
and
digitalWrite(4,LOW);
@@anyboards8006 what is the maximum number of faces that can be stored?
Did u choose Huge app or Face recognition in the tools section?
It was 2 years ago... I don't remember any "huge app" moments, so i think it was "face recognition"
@anyboards pls help me. Facing error in face recognition. Followed all the steps.
Sorry, it was many years ago, and a lot of things have changed, too much code to redo
Sir, I need get time also, can you please help?
Pls make tutorials step by step pls
How to do it? TutoriAl pls
Hi, can u help me to add more features to this program like get email notification when face recognition happens, in google sheet to get time also
Hi, to send emails copy "sendemail" function from this project github.com/unreeeal/esp32-google-sheets/blob/master/google.js ,to get time just use new Date(), if you need formatted time use Utilities.formatDate(new Date(), timeZone, dateTimeFormat);
anyboards Thankyou
@@anyboards8006 hi i tried to edit the code to get the time and email according to your guidance.
but i failed. I have attached my edited code here, to get the time. can u help me to figure out the errror. I tried to get the date and time in column 4 in spreadsheet. But its not happening. Please help me.
var timeZone = "CST"; //get yours at www.timeanddate.com/time/zones/
var dateTimeFormat = "dd/MM/yyyy HH:mm";
function getNamesList()
{
var sheet=getSheetByName('names');
var lastRow=sheet.getLastRow();
var res='';
var data=sheet.getRange(1,2,lastRow).getValues();
for(var i=0;i0){
var data=sheet.getRange(1,1,lastRow,2).getValues();
for(var i=0; i
Hello, i want make face recognition with ESP 32-CAM. i can send data to google sheet?
Please, you help me.
yeah, you can
@@anyboards8006 thank you so much. i want make project about face recognition send to google sheet. you can help me?
@@anyboards8006 Can you tell me how to do it? I only have 1 month to do it.
@@anyboards8006 i will make about. Check the name before entering the classroom. with a face recognition method. ESP32-CAM. after that, i will send time data to google sheet.
can you give me the zero PCB circuit diagram
i don't have it
Elon musk fan 💓
sir i have face this error kindly help me out
Build options changed, rebuilding all
C:\Users\User\Desktop\attedence_cmra_code\attedence_cmra_code.ino:13:25: fatal error: camera_pins.h: No such file or directory
compilation terminated.
Multiple libraries were found for "WiFi.h"
Used: C:\Users\User\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.4\libraries\WiFi
Not used: C:\Program Files (x86)\Arduino\libraries\WiFi
exit status 1
Error compiling for board ESP32 Dev Module
esp cam board should be selected, to fix wifi.h issue remove one library, I don't know why you have two of them
@@anyboards8006 sirr plss😔 help me out kindly make a full tutorial pls even i visit your website i couldn't find solution pls
Kindly send me your email plss.
Khan.saad4021@gmail.com
Hi, please google esp32 cam getting started and follow some tutorial's steps, I don't remember what you need to do to run a default arduino esp32 cam sketch, but if you run it there'll be no problem with my code
Sir i have just face this error
can you upload a "camerawebserver" example from arduino ide?
Hi can u help me for change google sheet to mysql? Please help me
hi, the esp side can be the same just some url changes,what's the problem with the server side at the moment?
I can't connect to MySQL
you need a php server, there're tons of tutorials over the web, you may try to find one by googling "arduino php mysql"
Hi, Thank you for your efforts and nice video. up to Recognition is ok.
1. Below is message in Serial Monitor. Felt somehow ESP-32 is not sending data to G-script.
Enrolling Face ID: 0 sample 1
-> No Match Found
-> No Match Found
09:52:05.954 -> Enrolling Face ID: 0
09:52:05.954 -> Enrolling Face ID: 0 sample 1
09:52:07.899 -> Enrolling Face ID: 0 sample 2
09:52:09.946 -> Enrolling Face ID: 0 sample 3
09:52:11.892 -> Enrolling Face ID: 0 sample 4
09:52:13.909 -> E (78171) fr_flash: Not found
09:52:13.909 -> Enrolling Face ID: 1 sample 7
09:52:15.852 -> Enrolling Face ID: 1
09:52:15.852 -> Enrolling Face ID: 1 sample 1
09:52:56.056 -> dl_matrix3dqq_fc_with_bias, value > DL_QTP_MAX
09:52:56.056 -> dl_matrix3dqq_fc_with_bias, value > DL_QTP_MAX
09:52:56.056 -> dl_matrix3dqq_fc_with_bias, value < DL_QTP_MIN
09:54:15.850 -> Enrolling Face ID: 1 sample 2
09:54:17.968 -> Enrolling Face ID: 1 sample 3
09:54:19.819 -> Enrolling Face ID: 1 sample 4
09:54:21.741 -> E (206002) fr_flash: Not found
09:54:21.741 -> Enrolling Face ID: 2 sample 7
09:54:40.127 -> dl_matrix3dqq_fc_with_bias, value > DL_QTP_MAX
09:54:40.127 -> dl_matrix3dqq_fc_with_bias, value < DL_QTP_MIN
09:54:45.115 -> dl_matrix3dqq_fc_with_bias, value > DL_QTP_MAX
@ praveen iot project
hi, sorry for long reply, your message was in spam(goggle did it), the serial output says E (206002) fr_flash: Not found, so you have not added fr partition to the scheme,
take a look at the video description
@@anyboards8006 Hi , really appreciated your swift response. just now i tried again with link robotzero.one/esp32-face-door-entry/ But unfortunately , that program shows lots of errors. would you advise any other link where program can work?
last time you only had 1 error, all the rest were debug info,
what errors do you have now?
no problem, so you did something wrong, you added an entirely new board, but you need to just add options to esp32cam board,
I uploaded my boards.txt to github, try it, but backup yours.
Select Ai-Thinker Esp32-cam and Face recognition partition
if no luck with arduino, try platformio ide,
just add the partition scheme file to the project and add board_build.partitions=rzo_partitions.csv to the platformio.ini
@@anyboards8006 Hi Bro. Sorry for my mistake. Now it is working perfectly. now my questions is is this data will save forever ? or once power of ESP is off all data will vanish ? if answer is yes , how to retain that data ? and if answer is no than how to limit number ID's enter ? & how to edit existing entry ?
hi sir. it says fr_flash.h not found. can you help me?
maybe wrong board (should be esp32cam), maybe something with your environment, try to upload "CameraWebServer" from default arduino examples
@@anyboards8006 it works, but when i put the face recognition partition, it repeats the reboot in the serial monitor
@@anyboards8006
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6364
entry 0x400806b8
Brownout detector was triggered
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6364
entry 0x400806b8
[E][camera.c:1049] camera_probe(): Detected camera not supported.
[E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004
@@anyboards8006 may i know what to do at the tools bar?
@@anyboards8006 this is the new one
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
Brownout detector was triggered
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
Brownout detector was triggered
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
Brownout detector was triggered
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8
[E][camera.c:1049] camera_probe(): Detected camera not supported.
[E][camera.c:1249] esp_camera_init(): Camera probe failed with error 0x20004
E (74021) fr_flash: Not found
anyone can help me this error
same
did you find it
How is the ip value derived from?
it should be printed in the serial terminal
@@anyboards8006 Can you tell me how to register a face? I make about face recognition. i have esp32-cam.
@@anyboards8006 can you help me, please
😥😥😥😥😥
Click Enroll face
Hi can u give the code fr this project. Its a great project
everything is in the description
@@anyboards8006 when I opened the IP address camera stream is not working. anything u know about this querry?
@@anyboards8006 is the partition thing is essential? without that can't I run this program?
does the original "camera web server" example work fine?
partition is required to save face masks, without it you'll lose all the faces on restart
Pls sir help me plss