SIEMENS LOGO -ANALOG INPUT SCALING AND CONTROL 0-10V
ฝัง
- เผยแพร่เมื่อ 1 ธ.ค. 2019
- #automation #plc #plcprogramming #motorcontrol #pump #schneider #zelio #siemens #controlwiring #siemenslogo #sensor #pressuretransmitter #pressure #0-10v #analog #4-20ma #0-20ma #switchgear
siemens logo PLC analog input 0-10v scaling and control for pump
auto pressure cut in cut off. - วิทยาศาสตร์และเทคโนโลยี
Thank you for your great tutorial.
Smart man. Thanks!
Wow.Very good presentation brother.Give us more video as like this Video.
please watch my other videos in my list...it will be useful...
@@sennapparajan.p Thanks for reply.
Thank you 🙏
You are welcome
Thanks..
Can you control the pump using hmi connected to logo?
😭 ji, why you don't do any videos?
WILL UPLOAD SOON
Hi there. Is it possible to make the 3 bar and 7 bar as variable where operator can change the value when they need to, by just pressing on Logo or TDE without touching the ladder program?
Yes possible
By pressing keys on logo
Sir I want to use this logic for 2 gas detector (0-10v) and operate 1 sov through both detector when value reach to high.
you can … want I can do for you ?
Hi brother,
If we need start the pump from Zero bar to 7 bar then cut off, then again start at 5 Bar.
How we can make programming. Please help
it is there in my videos
check in plc programming play list
Hello sir how are you ? Sir I have analog input of 0-10 V and I want to send corresponding output analog signal 0-10V to a device. How do I go about doing this ? Please help thank you
th-cam.com/video/8Q7QHJQEo4A/w-d-xo.html
please go through this.... any doubt please mention...
Can you please describe on ladder logic
Hi thank for your feedback..
Kindly follow the link the video is made for you..
th-cam.com/video/xTCIGEQT2iw/w-d-xo.html
Brother, I want to control weigh scale through siemens logo connect with load cell. is it possible?
if your load cell output is 0-10V OR 4-20MA then yes it is possible.
if your sensor output 0-10 Vdc or 4-20 ma its possible.
@@sennapparajan.p Brother, my weigh indicator is giving 0-10 v. but I need to control 3-4 out put with that. is it possible by logo PLC? like i need to use different type of material in one scale.
@@tejendrakunwar2549 Hi bro....
i understand u have one analog input with 0-10v and you need to control more than one output with one input.... right?
yes it is possible you can use analog threshold trigger blocks and you can control multiple outputs with single input...
wow.. clear explanation, what is your facebook account so i can ask you a few question about siemens plc prgramming .. thank you from philippines
sennapparajan ponmoudi
you can write here also...
thank you for your valuable feedback..
@@sennapparajan.p can i Put analog out put of the inverter to logo ?
@@jhericodaaco2034 hi... yes.... you can put put it... you can connect to logo with any source of analog signal ...
Can You make a full video
@@jhericodaaco2034 ok what you want to know exactly ?
Is move instruction used in logo plc?
No dear...
@@sennapparajan.p any other way?
@@hemantpatil5462 what you want to do ?
@@sennapparajan.p I have one question can we set the current setting in AI
4mA to 24mA