ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
STOP Using This Davinci Resolve Tool Right NOW!
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2022
- If you are using the blade tool, you are actually wasting so much time! Doing this will be 4x FASTER!
This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission.
📒 Show Notes 📒
2️⃣ Keypad I Use (Razer Tartarus Pro)➡️ amzn.to/3wzck3I
3️⃣ Cheaper Alternative (Razer Tartarus V2)➡️ amzn.to/4bGp3Az
3️⃣ Animation Templates Used:
brmediapro.com/product/anim-s...
4️⃣ Transitions used in this video:
brmediapro.com/product/seamle...
5️⃣ Titles used in this video:
brmediapro.com/product/modern...
My mission is to help content creators speed up their video-editing process while making higher-quality videos so they can go full-time doing what they love and making an impact through the power of video.
Here are the ways to further your Davinci Resolve knowledge & resources:
⚡️Davinci Resolve Starter Kit - brmediapro.com/product/davinc...
⚡️Davinci Resolve Beginners Guide - billyrybka.retrieve.com/store...
Connect with Billy Rybka on Social Media:
brmediapro.com
/ billyrybka
Contact@brmediapro.com
QUESTION? - If you have any questions about Davinci Resolve or Video Editing please comment below and I will do my best to answer it and or make a video on it :)
Subscribe to Billy Rybka Here: / billyrybka
Music provided by Epidemic Sounds. Start your free trial here ➡️ brmediapro.com/epidemic-sound
#BillyRybka #DavinciResolve #VideoEditing
![บุษบา - มอส รัศมี [COVER VERSION]](http://i.ytimg.com/vi/_n0yENSl8d8/mqdefault.jpg)
Hey fam! I hope you learned something new in this video & I hope it speeds you up overall!
If you want to take your videos to the next level & be part of a community of like minded people🔥Save Your Spot in my Inner Circle ➡brmediapro.com/inner-circle/
I never do all that to cut. If i need to cut one clip, I select it and hit control B then hit backspace to remove the unwanted area or delete if I want it to slide into position. If I want to cut all clips from top to bottom on that section then I will just hit control \ and that’s it. Everything else is unnecessary. Backspace and delete gives you the two methods you need, no need to right click and all of that.
That's what I do, CTRL B, then either Delete or Backspace pending on which is desired.
Until this video I figured everyone did it this way
Same here, i think i learned that in fcp way back when
Agreed, in my workflow the number of times I want to ripple cut is very very limited - it normally results in a jumpy video that is too obviously edited. I use Ctrl-\ to cut and then generally I want to put something else inbetween so I'm happy to leave a gap where the removed section was.
Yeah backspace for ripple and del for non ripple
I discovered this a few months ago and it has amplified my workflow like 3 fold! Legendary. I'm sure many people will appreciate this one, Billy. Keep it up!
RIGHT! Stright up game changing man!
That's basically the same way I do it, only I use Ctrl+B to cut the clip where the playhead is placed then Shift+[ or Shift+] to trim to the playhead. Same actions, just different keystrokes :)
I've been using a Tartarus V2 for about a year to help in some audio work I do, I'd love to see setups and ideas on how to use it in Resolve as well. I love the macro ability it gives.
Great tips!! I'll def check out more of your videos. Just started writing and making soft. I feel soft softs will help get to the next
hey thanks for all the info. i did exactly as you said . is there some thing i have to unlock to be able to do this thanks.
MOST USEFUL VIDEO EVER. I had “cut” mapped, but didn’t know about “start to playhead”.
thanks for this video, so helpful
I'm new to resolve, so this really helps me out a LOT, Thanks I found that in multiple video and audio the timelines need to be linked if you want to cut them all together, but this does save a lot of time and is much easier.
Thanks for the tip! Will be using that for sure. I´ve been doing it a little bit faster, with shortcut (B) for the blade and (A) for the selection, and then hit delete for the removal of the clip. But your style will save even more time 👍
Doesn't Control-B do the same thing already? (ie: create a cut at the playhead position)?
Yeah, however it's not close to the other controls, so you have to go all around the keyboard and it become super inefficient
@@BillyRybka its also one more button to press.. i was already using Q/W but not the razor instead i did cmd+B..
I'll change to razor rn
I've was using a free version of video pad for the last 5 years, but now that I've recently brought davinci Resolve i cant stop being amazed by what it can do and what a difference it creates, and thanks to your videos i no longer feel completely lost and overwhelmed. Great Work! thanks.
Thank you for this great video :-). I just can't make it work like in your case. When I set the keyboard like you did, it makes the "End to Playhead" to work only in the "cut" mode of DR 18.0.2 but not in the "edit", same with the "razor" it works only in the "cut" window. Now the "Start to playhead" is not working anywhere not in the "cut" and not in the "Edit" window. It would be great if you would have a advice for me.
I paused as you went along and did the steps myself and that helped a TON.
Thank you so much!
Great one!! Thanks!!!! 🙌🏻
I love the shortcuts. Great video
Is there any way to split one clip into many clips and specify how long each clip will be? For example a 2 minute single clip, split into exactly 8*15 second clips?
I use a Razer mouse (the Hex, with seven button side panel)
I have it set up to scrub both directions at increasing speed
Pause
Cut
And ripple forward and backward
I have the predecessor to the game pad you showed here, I have the Nostromo. I thought about setting it up; so I’d be interested in seeing what you did.
Great tips brother thanku very much
Thanks a lot bro very nice video
Thank you so much! Your videos are just teaching me everything I need to know........ Thanks man
You are the King! Thanks man!
Great tips, thank you. Amen to the end caption too.
Thank you so much.This helped me out alot.I wasted alot of time when i was editing but this technique really helped me out.Keep up the great work
very good. Can we combine two commands in one key, kind of macro
This is such a helpful video. Thank you so much.
Dude you made my effing year. I came over to Resolve from my paid app Movie Studio 14 Pro (needed to be able to render at 1440p) and I was used to using S for split ALL the time. I thought the only option was to switch to the razor icon. Now I can split and cut with S and X - absolute beauty! Many Thanks!
Thanks for the video. Honestly the fastest way for me is using the default ctl B and delete method. Specially because davinci will automatically highlight what's before the cut. That's an additional step automatically done for you. Once you factor it in you're flow and choose you're cut points in a systematic manner. It speeds up the cutting process significantly even when you have multiple tracks in your timeline.
Ctrl-B then Shift-[ done
I do Ctrl+\ because it's right next to Ctrl so I don't need to use two hands to cut.
@@DarkStarCoreXyou need 2 hands for ctrl+B? O.o
@@CorrosiveCitrus Not really, I can do it with 1 hand, but I find it easier to use Ctrl+/ anyway.
Tbh I still prefer the blade simply for the reason that the line of the playhead is too thick for me sometimes. B, left click, left click, delete. Still more steps than you need, but the blade just makes it easier for me to make a precise cut.
I really like your videos, keep it up!
HEY MAN HOW U DOING? , I HAD A QUESTION IS THERE A WAY TO ADD CUSTOM BUTTONS BUT TO THE BUTTONS FROM MY MOUSE HAS SIDE BUTTONS?, EXAMPLE: REPLACE (BLADE) "B" TO MY MOUSE SIDE BUTTONS?
I also have the Tartarus for resolve but I still want to to see how you use it. I bet you have tons more shortcuts in it than I do.
Hi, like your videos very much.
For high quality reels, on the IPhone then film in 4K at 30 fps? Or 60 fps?
How do I get rid of the black bars left and right on davinci? So that as full screen the reel is exported?
What are the best settings for the export ?
Very good tips Billy. Thanks 4 sharing. Cheers !😎😎
I am currently shifting from premiere to davinci and premiere actually had the same commands for Q and W keys. I've been editing videos for a while now and on a daily basis so this is something that's been holding me back to shift because I cannot waste so much of my time trimming each and every clip. Thank you for making this video I was searching something exactly like this.
this is amazing , quick quest : Do you also turn on the force debater to highest quality while exporting especially for TH-cam and Instagram ???
Great video, thanks!
do you have a video that shows us some common shortcuts you recommend?
Omg thank you so much, this is exactly what I needed!
Great tips as always!
hi! i just wanted to ask if this works on multiple tracks...im struggling with it just cutting the top track and not the bottom if that makes sense.
Good Day, Ive reviewed many vids, including most of yours; and I may have missed this paicular effects tutorial; if there is one, but Im new to DR18 and Im trying to make a telephone "ONLY", vibrate as it rings in my clip. can you explain how to do that?
Quite efficient! Thanks a lot for sharing your tips👍
Yo, Billy. Thank you so much for this tip. It has helped me out so much on my editing time. Once I get it to be automatic this will drastically change my cut time.
I love your work, keep it up!!
Thank you so much!!! Really helpful!
Wow, Billy! I subscribe to your channel now. You are an awesome teacher to me and I understand your English perfectly too. Cheers from Brazil.
This is SUPER mega useful!Thank you really!
!
you are a live saver man appreciate it thanks 😘
doing this when i get home, thank you
I 100% would like to see a video on the Tartarus I have the V2 collecting dust from when I used to play WoW heavily and if I could use it for editing that would be amazing.
This is an amazing video, saved me a ton of time
This literally helped me. 😅
Thank you, Billy.
awesome tip! i ended up using the 2 extra buttons on my mouse. so much easier now compared to before, thank you
Thank you so much for this video, Billy. Seriously. Gonna save me a ton of time in the future. I migrated from Premiere recently - and was frustrated out of my mind to map a key equivalent to Insert Cut. Razor is it. Thanks a bunch bro.
I prefer setting an In and and Out point and then hitting Delete.
this is exactly what I've been looking for! It's so frustrating that I can't just right click and have a tool to select to "cut" a track or video into two pieces.
so i did this and it only works in the cut page not the edit page ???
what is the font you used here? appreciatte
Quick, fun and simple. Great job!
Thank you. Very useful
Thank you! I'd had this mapped in a round about way to my F1 key and somehow the mapping went awry. This is much more straightforward. And yes, I'd love to see a vid on that macro keyboard. I use a macro mouse which is amaaazing but it'd be nice to slowly step away from the mouse.
I don't understand one thing though, what's the point of using the right click to display the menu and select "ripple cut" if you can simply press the "del Ins" key to delete the selected area? I always did it that way.
Anyway, it didn't work for me, I was able to assign a key to the razor and it worked, but for some reason, when I did the same to the "start/end to playhead" actions it didn't work :(
Great and useful video as always...😉
Hi Billy can you make video that goes over how to make the effect where by jewelry shine and glistening very brightly in music videos?
Thank you! This made my workflow even more efficient.
This is great. I used to use "trim start" and "trim end" on Q and W, but that required one more step -- entering Trim mode. This bypasses that; awesome!
Hate using the playhead to edit. I just use the fast key for the blade tool, click what I want cut then delete the video and delete the dead space. It automatically ripples it and does what you need it to do.
Could you make customs transitions how to video? If you already have where can I find?
You can also do this using shortcut like ctrl+b and ctrl+shift+[ or ]
The intro was amazing 😂
A video on the Razor Tartarus would be great. I have been using one for a while but would love to see your take on it.
Very clever. Thanks Mr Fishie :)
why is there a gap in start to playhead? thank you very mcuh
Let's say I accidentally cut the wrong section can I undo it or need to star all over again
Hi Billy thanks for the video really want to set up the shortcut but the only problem is when I do my razor it only chops the video and does not do the audio am I missing something? Many Thanks
Thanks for the support man! So Deselect the video layer and use the razer tool on the clip. No layer should be highlighted when you cut
Hey Billy can you make a tutorial on how to make the bass displacement effect ( 3d tracked ) . I can't find any tutorial on how to make 3d tracked effects on davinci resolve ☹☹
Great video, and please make Tartarus v2 video :D
Hi Billy, recently I found that when I drag and drop images from my Media Pool, the images show up as just blue sticks on the timeline whereas in the past they show up as full frame photos. Do you know why this is happening? I can drag the blue stick out to the left to open up the full image, but it's just another step I have to do. It would be better if the images just show up in their full frames when I drag and drop from Media. Any advice please?
I’m confused. I thought this already existed. I’ve been using command + backslash which slices. Then shift + delete which ripple cuts. Didn’t program them, they were already there.
looks like it's the same, just different keyboard shortcuts
I just switched to DaVinci from Premier the other day and this video popped up just in time!
Thanks for the ideas!
Mind blown. Thank you so much!!
how do make playhead continue at the start of the clip after ripple deleting during playback instead of playhead not stopping
What is the difference between "Delete selected" and "Ripple Delete" ?
Awesome video. I have a hotkey for this in Ableton live for my music and thought the default cut method in davinci to be slow and stupid. THANK YOU
Thank you!
Basically setting up a Premiere work flow. Coming from Premiere I couldn’t get used to delete deleting everything before. I think was doing it wrong, but this is how I would go through my footage in premiere.
Reading the comments helped me better understand how Davinci does this better by default. CTRL+B and delete. I’ll have to give that a try
i dont know if its new, i guess it must be but i never played with the shortcuts and "CTRL+B" works for cutting and "DEL" ripple deletes where "BACKSPACE" just gets rid of the clip without rippling
This is the video I’ve been waiting to find. This is how I have final cut set up.
Bro, you are a genius. I was so annoyed the blade tool and you solved the problem. Thanks🙏
thank you sir!
Never even knew that existed. I always use the split clip tool from the cut page but use it on the edit page with CTR B.
Brilliant tip clearly explained. Will save hours. Many thanks!
Me newbie used more than 500 times razor to make amv, then see this video. Im like O.O . But with razor you can see video with hovering your cursor and thats so convenient for me to just dragging the line. Any tips for that?
So glad I found this channel
Thanks man, since I switched from Vegas cutting was a nightmare! Now I can cut as I always did also here, super useful
My question is, suppose there are 3-second gaps between the clips you cut. How can you combine all the clips with a single click, going through the gaps between them?
I thought there was something like this already, at least in 17. I think the keyboard shortcut for cutting was like the backslash \ or ctrl+B or something and then there were 2 other shortcuts that were like ctrl+shift+[ (left bracket) and ctrl+shift+] (right bracket). I'm a little hazy on if those are the exact shortcuts, but they should be something like that for what I was thinking.
I'm so glad I found this video after finishing up my first project! Hehe.