Thank you so much for making this video! I have the same dryer and the same problem and I was able to fix it myself for $23. The repair companies were quoting me upwards of $250!
Great video. Just ordered the same ND a heating elements as out element recently broke. Figuring I might as well replace the beari g and belt while I'm in there. My poor dryer definetly needs a good cleaning on the inside. Thanks for the video! I was having trouble figuring out how to get the barrel out. Your video easily showed how to do it. Yay for saving me $900 and a trip to the yard to scrap out my dryer!
Very helpful. My front panel has support tabs at the bottom which it sits on - they must be aligned before reinstall - they support the front, not the other clips or screws. Otherwise exceptional, and realistic - I drop my tools regularly; YES, some Phillips screws are large cross/pointy Phillips wont work. Great warnings and process throughout- THANX!
Great video man. I just bought this condo and this damn dryer takes forever... It's getting hot but I suspect it's too clogged up with lint. I see lint everywhere! So it's probably not getting air. I wish I watched a video like this first.
Did you run into any issues with that shorter belt that was supplied? I notice upon reassembly that the tension arm spring was now rubbing against the motor shaft. Looks like that would eventually cut through that spring.
Very good video I used it to fix my Frigidaire dryer. My only question is did you really need that much grease to go into that area used about the whole tube is that necessary? Do use that much are used that much on mine. I was just wondering if that was something you knew or just guessed it
Thanks for the video. Just saved me a few hundred dollars and also taught me how to take a dryer apart
Thank you so much for making this video! I have the same dryer and the same problem and I was able to fix it myself for $23. The repair companies were quoting me upwards of $250!
Thank u so much! I went thru this with you and it helped so much! She purrs like a baby now :)
Thank you so much. I have the same dryer. I found the replacement kit for $17. Everything went exactly like on your video. No issues.
followed step by step and my Dryer works..no more squeals and screeching
Great video. Just ordered the same ND a heating elements as out element recently broke.
Figuring I might as well replace the beari g and belt while I'm in there. My poor dryer definetly needs a good cleaning on the inside.
Thanks for the video! I was having trouble figuring out how to get the barrel out. Your video easily showed how to do it.
Yay for saving me $900 and a trip to the yard to scrap out my dryer!
Very helpful. My front panel has support tabs at the bottom which it sits on - they must be aligned before reinstall - they support the front, not the other clips or screws. Otherwise exceptional, and realistic - I drop my tools regularly; YES, some Phillips screws are large cross/pointy Phillips wont work. Great warnings and process throughout- THANX!
Fantastic video, very very helpful, thank you very much. Followed your instructions step by step and we were able to fix our dryer. Thanks again
Very helpful video, sir! Simple and straight to the point. Thanks!
Thank you for sharing this! I'm going to try it.
Great video man. I just bought this condo and this damn dryer takes forever... It's getting hot but I suspect it's too clogged up with lint. I see lint everywhere! So it's probably not getting air. I wish I watched a video like this first.
Did you run into any issues with that shorter belt that was supplied? I notice upon reassembly that the tension arm spring was now rubbing against the motor shaft. Looks like that would eventually cut through that spring.
Very helpful and to the point.
Very good video I used it to fix my Frigidaire dryer. My only question is did you really need that much grease to go into that area used about the whole tube is that necessary? Do use that much are used that much on mine. I was just wondering if that was something you knew or just guessed it
You’re saving me today but still having issues (it’s shot way past its replacement date it’s disgusting)
Very good job man. Very helpful. Thanks a lot.
14:03 Does the spring stay that way, in contact with the pulley or you later changed it to farther hole?
Do you have a video on how to fix the matching washer? The tub is leaning to one side.
Great Video, thanks for sharing 👍
What did we do wrong if after we replaced bearing, now there's a weird grinding or rubbing noise when turn on the dryer.
Great video, you explained everything very well. How is this parts kit holding up? Do you have a link to the one you purchased from Amazon?
Wow, you are so talented. Lucky wife you must have?
Yes indeed!
I currently did this to mine but it’s still making a thumping noise like the drum is hitting the side of the dryer. Please help if possible.
Thanks!!!!
I need to know how to start it
Good Job
Duh!
Thank you for the video! @thefixitdad
This video helped a lot. Good job!