Phantom 4 Pro Shell & Motor Replacement
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- This is part 2 of the Phantom 4 Pro rebuild. If this video was of some help to your repair project, please give give it a thumbs up and please subscribe if you like the varied content of this channel.#phantom4repair
Phantom 4 Pro shell can be bought here:
www.cloudcityd...
Camera ribbon cable can be bought here: www.fstop-labs...
Equipment used in most of my videos:
DJI Osmo Pocket: amzn.to/2uZ0SOG
DJI Osmo Action: amzn.to/2R0ooSL
DJI Inspire 1: amzn.to/35yH0OQ
DJI Phantom 4 Pro V2: amzn.to/2Nytt3S
DJI Mavic Pro: amzn.to/2G00EJk
Hat mount for GoPro and Osmo Action: amzn.to/2tvNMrN
Zoom H1n audio recorder: amzn.to/37jJ92y
Rode Lavalier microphone: amzn.to/30I9i8Z
Rode VideoMicro on camera microphone: amzn.to/2NOsNY2
JOBY GorillaPod 3K Kit: amzn.to/388aTXA
Respirator dust mask for explores: amzn.to/3alzYAP
Lights:
Camera light: amzn.to/2uZYrLJ
Lume Cube: amzn.to/2TAuagG
Email: daltondroneanddiscovery@gmail.com
Facebook: www.facebook.c...
Twitter: / daltondrone
Music provided by Epidemic Sound:www.epidemicso...
Track: Cour - Rainforest
Link: • Cour - Rainforest
Thanks for showing this it's been very helpful a few times!
Glad it was helpful!
Job well done Dalton! Thanks for sharing this. I have to replace the motor for my drone and feeling pretty confident after watching this. Thanks!
Your welcome. Thanks for the comment.
Nice share, not many have the nerve to get into these like this. Parts are one reason for me. Nice to see the inside workings of these.
Thank you.
Awesome video and drone footage. Keep up the good work
Melhor drone até hoje, top phantom 4.
Just the video I need
Awesome. Thanks for sharing 🙏
When starting your drone, try not to be around anything loose gravel, or sand sand is bad
It looks like the motors are supported by both the top and bottom shell. Is that correct?
So if the top or the bottom starts to crack, that's not the only thing holding it, the other shell is still holding it, correct?
Correct.
Excellent job! My Pro 4 has a WM331s. I am told this is the ver2. Are all the motors the same? Also where can I get a complete parts list?
Thank you. WM331s is version 2. It just means you have ocusync for transmission instead of Lightbridge. The motors should be the same. I get my parts all over the place including Ebay.
It sounded like you said LSD card 🤣
nice video! I have a question.. the DJI P4 pro V2 and DJI P4 Pro+ V2 that's the same body shell? thank you
The only difference is the plus has the built in tablet on the remote.
During the parade on December 16, the drone took a picture from a height of 5 feet with a Bangladeshi flag on the head of a student's Chhota Bash Kanchi. When the student ran away from the drone without realizing it, it hit the flag and the drone flew 5 feet and the base of the gimbal broke. Now everything is fine with the drone. The base of the gimbal is broken so it doesn't work anymore. How much money could it possibly cost to fix it? It would be good to know. Otherwise, after opening, they will say that it will take a lot of money. Then if it is not fixed, the mechanics will leave the important equipment and say if it is not fixed, take the drone. If possible state the cost amount. Then I will bring……….
What glue you using it?
No glue. It snaps together and it’s held with screws.
Hello' can I replace the shell of my Phantom 4pro V1 to the V2 Shell?? Thanks!
A very good question. The V2 has Occusync. I'm not sure what additional electronics are installed and if the 2 shells are interchangeable. Maybe somebody on the know can leave a comment.
Liked and Subscribed!
I am using the Mavic 2 Zoom! I have some drone videos on my channel if it's of any interest?