Pilot RC Slick build update 1
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- This is an update to the build out of this Slick from Pilot RC.
This is a long video, but I wanted to show some of the things I liked and some of the things I wanted to change about this build.
I subbed hope it helps I’m looking forward to seeing your build, I have a 50cc pilot rc edge 540 and I love it, I usually buy extreme flight and 3D hobby shop when I find them. Giant gassers are the most fun in the world
Thanks, I am super excited also.
Hi there, the rudder ball just goes into a hole in bottom of rudder with CA glue...but the wire tiller arm I snapped off and ended up having to screw a long bolt into one of the grub screw holes and renew the ball link without the brass ball to accommodate the bolt and it's been great ever since.
If you didn’t like the plane you should build it from scratch!
12:09 Just use glue, and let set in bow link. work just fine on 84''
Part1
This is the 67" from pilot rc right?
Yes, this is the 67" Slick from Pulot RC.
Did you manage to maiden it yet?🤞
Not yet. Life has gotten in the way. :-)
@@ghostriderrc
I've been doing a lot of flying with the Slick and I've actually moved my lipo right back against the wing tube and I've flown it with 660g 4000mah lipos and also 813g 5200 mAh
with both hard up against the wing tube...I checked the 45° inverted flight line and it was Spot on neutral I did a rough field C of G check and it was about 2 in behind the recommended mark on the fuselage. So I think if you just try flying it with your lipo as far forward as you can I think you'll be absolutely fine.
I'm finding it a really lovely plane to get to grips with I've posted some more videos if your interested.
you glued your tail rudder before you glue it imto the plane
thats the wrong order i guess
Sorry for the confusion. I have not glued the rudder in place. I just wanted to show how things were lining up.