can i connect our old uno steering wheel and pedals along with this in the same undo board ? i mean can i connet both steering wheel , pedal and h shifter in the same uno board ???
Thank you for this wonderful project, I have been willing to make a homemade H shifter using Arduino for a while. This tutorial was also really easy to follow. Again, thank you Tech at Home!
u can use, one Arduino for all Steering, gear and pedals, but use this file : drive.google.com/drive/folders/1HnBkqISEwCshP16Et6umWX6VqdTuwgt1?usp=sharing
For making H-shifter you can refer our old video itself, and do the Connection in the same single Arduino Use GND pin for gear nob And Digital pins for individual Gear contacts Refer to out H-shifter Tutorial circuit, u will get idea
Pls tell me how i can enable dfu mode in arduino uno r3 i short two pin near usb point but it doesn't work. when i open flip its show's AtLibUsbDfu.dll not found. i also paste dll file in usb folder but not work in device manager its show under ports arduino uno com 3 but atmega32u2 is not showing. pls fix this issue soon i bought arduino from amazon
Hi, did you find a solution? Even though I do the reset the Arduino never changes to from Arduino uno to ATmega, so I can't turn it into joystick. Thanks in advance
Ok thank you, you make great videos BTW. The details in your connections video and all the FFB series are very impressive and easy to follow, so keep the great work.@@techathome
Not required, one board is sufficient. Refer to our old Unojoy video tutorial for steps. But use this updated code and circuit from this link for one board: drive.google.com/file/d/12i-rsl3xpVoyA1x3x1BKBp0t-3153vR1/view?usp=sharing
You can use single Arduino for steering and gear, Refer the circuit from here: drive.google.com/file/d/12i-rsl3xpVoyA1x3x1BKBp0t-3153vR1/view?usp=sharing
In the Same way, use any of remaining digital pin of Arduino and assign that in the game. For hardware you can use a push button or else Aluminum foil Contact
You can use single board for all the things. Use code and circuit from this link: drive.google.com/file/d/12i-rsl3xpVoyA1x3x1BKBp0t-3153vR1/view?usp=sharing Steps from this video: th-cam.com/video/CPWPPu2dR7M/w-d-xo.html
Waiting for ffb (force' feed back ) in thiss setup ❤️
FFB: th-cam.com/play/PL4B0LEKY-jrROPZPEDMZ4DPqISPXvVsdL.html&si=3XXTMli30oAF2c5S
I love Hindi people, they are for real one of the nicest people and they are very thingful
Make a video on how to connect multiple dc motors with motor driver and controll with an arduino for drone
can i connect our old uno steering wheel and pedals along with this in the same undo board ?
i mean can i connet both steering wheel , pedal and h shifter in the same uno board ???
Thank you for this wonderful project, I have been willing to make a homemade H shifter using Arduino for a while. This tutorial was also really easy to follow. Again, thank you Tech at Home!
Welcome!!
is this arduino code have the previeus steering wheel and pedals one ?
Hi! I've tried now. It say that AtLibUsbDfu.dll is missing :( . Can you help me please?
Try this: th-cam.com/video/Vd0F0XHzchY/w-d-xo.html
will it work on assetto corsa?? btw im waiting for a 900degree tutorial because im trying to buy arduino
No , it is best for ETS2 only,
We will try to make it soon
Bro we Connect this with the Button Matrix for the ffb steering Wheel Right?
Yes you have to use button matrix.
Can we use a single Arduino board for all Steering gear and pedals
u can use, one Arduino for all Steering, gear and pedals, but use this file :
drive.google.com/drive/folders/1HnBkqISEwCshP16Et6umWX6VqdTuwgt1?usp=sharing
@@techathome Bro you have shown all but where is H-Shifter. How to connect that one
For making H-shifter you can refer our old video itself, and do the Connection in the same single Arduino
Use GND pin for gear nob
And Digital pins for individual Gear contacts
Refer to out H-shifter Tutorial circuit, u will get idea
@@techathome thanks a lot TechAt home. You saved everyone's money from purchasing those expensive Logitech steering wheel set
Welcome bro!!!
Pls tell me how i can enable dfu mode in arduino uno r3 i short two pin near usb point but it doesn't work. when i open flip its show's AtLibUsbDfu.dll not found. i also paste dll file in usb folder but not work in device manager its show under ports arduino uno com 3 but atmega32u2 is not showing. pls fix this issue soon i bought arduino from amazon
Pls msg us on Instagram. @tech_at_home
@@techathome check insta message pls
Hi, did you find a solution?
Even though I do the reset the Arduino never changes to from Arduino uno to ATmega, so I can't turn it into joystick.
Thanks in advance
@@luisaxen No
Can we connect steering wheel and h shifter in one aurdino board
No
@@techathome why can u explain plz
Steering needs analog signal
Also clutch need analog signal.
If we use same arduino, the channels will mix.
I have a problem with the h shifter when i tried to put it in any gear ets2 doesnt detect it but in gamepad controller settings it detects it
You have to set the gears in the game
Is it possible to combine the shifter, pedals and steering wheel?
Yes u can do it,
Use this code : drive.google.com/file/d/14IecPPkSGXZyPbP-7xubQefJa8WRGmPn/view?usp=share_link
can i do these with arduino nano? you say we must connect two pins of Arduino UNO togheter but in arduino nano we dont have these pins...
No, This works only with Arduino Uno.
Specifically DIP version having 16U2 as Serial communication chip.
Will it change the original Uno firmware and make it unusable for normal uno projects?
It will change Uno firmware
But you can convert back to normal, at the end of video it is shown
Can this be added to your newer FFB setup?
It can be added, but connection will be different.
I will also making new H shifter for my FFB setup, may be little compact one compared to this.
Ok thank you, you make great videos BTW. The details in your connections video and all the FFB series are very impressive and easy to follow, so keep the great work.@@techathome
Thank you❤️
Hey bro, I have a g27 shifter. Will this code work with that as well?
No
Bro should we use two aurduino uno boards
Not required, one board is sufficient.
Refer to our old Unojoy video tutorial for steps.
But use this updated code and circuit from this link for one board: drive.google.com/file/d/12i-rsl3xpVoyA1x3x1BKBp0t-3153vR1/view?usp=sharing
sir console madokke enenella ingredients upyogisidira adara list kodi
We have explained everything in the video itself.
Which software is used for Arduino Leonardo ?
This works with Arduino Uno,
Not sure about leanardo
How to make sensitive accelerator, brake and clutch ?
We will be making it soon,
Please make a tutorial for all steering pedals and shifter with one uno uaing periometer
Overall steps remains exactly same, but use code and circuit from here: drive.google.com/file/d/14IecPPkSGXZyPbP-7xubQefJa8WRGmPn/view?usp=share_link
Bro can't we use only one Arduino for steering,paddles and gear shifters. If possible please make it , it will be so helpfull.
No bro, you need two Arduino.
If you use one , the analog channels will mix.
We can bro in mega or some other
@master_mooncity_vellore u can use mega2560 I've done it but there's no force feedback .
Can you show how to make paddle shifter for unojoy steering wheel
Follow this Same for paddle shifter.
But hardware Part you have to do with wood, and using good tools
th-cam.com/video/AzB-iH4iCw8/w-d-xo.html
@@techathome can i make it in the same way of sequential shifter
Sir can i use it for other games also. What to do it for it
It will not work in all the games,
Only in Euro truck it works well
Bro i subscribed thank you so much for the Videos its easy to Follow and understandable continitue this good work👍
Thank you so much ❤️
can someone tell me how to make the arduino get back to its normal state and become a normal arduino again?
Shown at the end of this video: th-cam.com/video/CPWPPu2dR7M/w-d-xo.htmlsi=MeLzhGHZ95QFXT9k
can u make all in one arduino one r3 ?
All in one, code and circuit : drive.google.com/file/d/14IecPPkSGXZyPbP-7xubQefJa8WRGmPn/view?usp=sharing
Bro can u use this with keyboard hex file
No
I can't convert aurdiuno into gamemode please help me
Which type of Arduino are you using?
Ch430 chip doesn't work.
@@techathome I am using the 800 one
What is the error you are getting
what code should i upload to make the board being recognized as an joystick?
UnoJoy ArduioSample code (we have shown step by step in the video itself)
Bro plz put a video of installing mods in euro truck simulator 2
Ok, will do it
Thanks 👍
th-cam.com/video/fXSpfCH9kLs/w-d-xo.html
hi atlibusbdfu.dll Not Found
error
Download that dll file from Google and paste it in : c/program files(x86)/Atmel/Flip/usb .
That way we can use this with other games
U which language bro
Kannada
@@techathome sir mysuru ali iroda neevu?
@@rajathkrishnarhathwar4334 No Hassan
Bro ur doing awesome
Thank you so much!!
Bro is this working with forza horizon 4?
No
@@techathome is there any way to do that? to make this compatible with forza horizon 4?
We tried it, but not working
Brother pls give the arduino code.
You can use single Arduino for steering and gear, Refer the circuit from here: drive.google.com/file/d/12i-rsl3xpVoyA1x3x1BKBp0t-3153vR1/view?usp=sharing
Need Hand Barke Also...
In the Same way, use any of remaining digital pin of Arduino and assign that in the game.
For hardware you can use a push button or else Aluminum foil Contact
@@techathome 👍 Thank You Very Much
Or please give us the code
All files in description
Sir isse pls gta chla ke dikhado pls
Not work properly I think, not tried bro, my laptop will not support that game
Auto Gear Plzzzzzzzzzzzzzzzzzzzz
th-cam.com/video/YZXKILkRDFA/w-d-xo.html
I have 1 arduino board
You can use single board for all the things.
Use code and circuit from this link: drive.google.com/file/d/12i-rsl3xpVoyA1x3x1BKBp0t-3153vR1/view?usp=sharing
Steps from this video: th-cam.com/video/CPWPPu2dR7M/w-d-xo.html