N54 REBUILD | EP 6 | PINNED CRANK HUB \ I DROPPED MOTOR
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- I DECIDED TO GO SINGLE TURBO ON MY 335I. I ALSO DECIED TO REBUILD THE ENGINE FROM THE GROUND UP. I SOURCED A DONOR ENGINE. THE ENGINE FAILED FROM A WORN CAM LEDGER. THIS WAY I CAN BUILD THE ENGINE WITH OUT PUTTING THE CAR DOWN. IN THIS EPISODE I FOCUS ON INSTALLING A 2 PINNED CRANK HUB AND SOME TIMMING COMPONETS. I HIGHLY RECOMMEND THE DIGITAL TORQUE WRENCH FROM LOWS. I WILL LEAVE A LINK BELOW. ALSO I WILL GLADLY ANSWER ANY QUESTIONS JUST LEAVE A COMMENT BELOW. FOLLOW ME ON INSTAGRAM @BLUEPRINT_AUTO
www.lowes.com/...
Brave, i way praying thatdrill bit didnt break
It worked well. You just have to take your time and have patience. Use tenique.
Yooooo So lucky nothing broke dude my heart dropped
Not that luck I didn't realize I scratched the deck I have to machine it again I disassembled the entire engine again. I have 2 broken bolts in the bell housing.😑
I'm reassembling mine and I can't find information, even on TIS, on reassembling the hub. Oil pump sprocket (with grip discs installed), washer, and camshaft timing sprocket is what I saw when i disassembled. Do you know the part number of that washer?
Oare u using pinned crack hub or regular
@@JermaineLeeBlueprintAuto the splined one from VTT
You find everything I’m looking for the same
ay man where the other 180??
I didn't make a video, but here is what i did.
After resurfacing the block, i reassembled the crank shaft, and this time, i used thick pieces of card bord on the floor. i laded the motor down on its side. This is how i was able to achieve the proper torque. Next, when i put the motor back on the stand, i used grade 8.8 steel bolts.
Nice job man I like this job
What???!!!!!!
It's has been fixed car is running now
Everyone dipped as soon as that motor fell LMFAO glad everything good tho bro. Shit coming out fire🔥
Not as good as I thought. I scratched the deck.... I had do disassemble the entire motor and send it back to the machinist. Hopefully it can be salvaged with out removing to muck material. Wish me luck.
That sucks bro! I just built mine. So much time and knuckles busted.
@@alexgonzalez7395 happy to report i managed to salvage it mottor running strong till this day.. check my more recent videos