Those Pontiac Fiero's are great little cars. Back in the early 90s I always thought they looked like the Ferarri 355 F1. I heard they got great mpg too.
Thanks For watching. The Fiero’s are definitely cool little mid engine cars. I have a F355 Ferrari Replica that will be coming to the channel soon too so stay tuned for that!
Looks great man!! Maybe mould it into the red bumper for lower diffuser and build same for spoiler but wider out to quarters . Very inspirational video!!
BIG ✔! 🔟0️⃣%! You're the boss! It looks awesome together with the same template for the spoiler, let's say it kinda uniform! Can't wait to see the next video for it! 👏👏👏👏👏👏
i must admit the diffuser looks like its going to work well done , i also have a Koenig testarossa replica here in the UK , which i bought way back in 2006 and have been modifying since . Search RV Dynamics Nemesis v8 and youll see my videos. The Nemesis is as accurate as you can get proportion wise so its a big car , and althought originally designed for a jaguar v12 mine and a friends have v8 power. Incidently i have seen several Pontiac fiero testarossa kits here in the UK but never a Koenig version so keep at it believe me nothing turns heads more than a modified Testarossa replica.
Great design! Did you finish this. I found your comment about making one side then mirroring it for symmetry. My only thought would be to follow the rear edge profile of the car rather that squared off. It also may need to be squared to gain the best effect. Seriously, great design and video. Well done.
What tape do you use for holding the fins, I'd like to do that with my 2017 Cruze, for aesthetics look with my Vibrant performance tubo exhaust, all shiny 308 steel welded with 4 inch tip built in, running a dual set up. And I want to make the bumper look cooler.
For making the template i just used any kind of masking tape. I will be posting a video of fabricating the final design so stay tuned for that! I think a diffuser on your Cruze would look rad! Go for it
@@MADCRE8TIVE When I was a kid, those cars were so cool to me. I'm starting to feel some of that nostalgia coming back, and yours is definitely adding to that. I love the overall look of yours, and that diffuser is going to look so sick on it. Thanks for the tips, ideas, and videos!
The material is a thicker pistol board more similar to cardboard and can be found at any local crafts store or dollar store! Hope that helps. The material was perfect to use for the project.
Its Looking Bad AsS! Mike. (took your advice ,Im filming my Ferrari Daytona build aka miami vice project, don't know if i will upload it or not ,but we'll see.)
![DIY DIFFUSER | BUILD YOUR OWN DIFFUSER! | #OMGMIATA | EP25 | [4K60]](http://i.ytimg.com/vi/7bxfJMi8r_E/mqdefault.jpg)
![DIY DIFFUSER | BUILD YOUR OWN DIFFUSER! | #OMGMIATA | EP25 | [4K60]](/img/tr.png)
Awesome job! Thanks for the inspiration.
Thanks for watching KingDirt907!
Jeez that car looks like a high school project
Lol especially with all the cardboard templates!
Those Pontiac Fiero's are great little cars. Back in the early 90s I always thought they looked like the Ferarri 355 F1. I heard they got great mpg too.
Thanks For watching. The Fiero’s are definitely cool little mid engine cars. I have a F355 Ferrari Replica that will be coming to the channel soon too so stay tuned for that!
Looks great man!! Maybe mould it into the red bumper for lower diffuser and build same for spoiler but wider out to quarters . Very inspirational video!!
BIG ✔! 🔟0️⃣%! You're the boss! It looks awesome together with the same template for the spoiler, let's say it kinda uniform! Can't wait to see the next video for it!
👏👏👏👏👏👏
Thanks for watching Pau Barri! Appreciate the positive comments! Enjoy the build
i must admit the diffuser looks like its going to work well done , i also have a Koenig testarossa replica here in the UK , which i bought way back in 2006 and have been modifying since . Search RV Dynamics Nemesis v8 and youll see my videos. The Nemesis is as accurate as you can get proportion wise so its a big car , and althought originally designed for a jaguar v12 mine and a friends have v8 power. Incidently i have seen several Pontiac fiero testarossa kits here in the UK but never a Koenig version so keep at it believe me nothing turns heads more than a modified Testarossa replica.
Your Car look insane! what a bold replica.. I would love to see some more vids of your replica!
Great design! Did you finish this. I found your comment about making one side then mirroring it for symmetry. My only thought would be to follow the rear edge profile of the car rather that squared off. It also may need to be squared to gain the best effect. Seriously, great design and video. Well done.
Sorry, I found your comment very interesting and enlightening.
are you using 1/16 thick or 1/8?
Nice job Mike. Keep up the dedication.
Thanks for the compliment and the for watching!
What tape do you use for holding the fins, I'd like to do that with my 2017 Cruze, for aesthetics look with my Vibrant performance tubo exhaust, all shiny 308 steel welded with 4 inch tip built in, running a dual set up. And I want to make the bumper look cooler.
For making the template i just used any kind of masking tape. I will be posting a video of fabricating the final design so stay tuned for that! I think a diffuser on your Cruze would look rad! Go for it
looks really good bro!
Thanks Dude! much appreciated! gonna look Even better when the cars painted!
Awesome 👍👍👍❤️❤️❤️😍
Thanks for watching Adam!
It’s coming together. Looks cool
Thanks!!!
Nice work!
Thanks! going to be welding up the new diffuser in the next few weeks!
@@MADCRE8TIVE When I was a kid, those cars were so cool to me. I'm starting to feel some of that nostalgia coming back, and yours is definitely adding to that. I love the overall look of yours, and that diffuser is going to look so sick on it. Thanks for the tips, ideas, and videos!
Ryan Scheckler’s older brother?
Cool great job
What's the width size of black sheets? 3mm?
It was 1/4” Bristol board!
sick spoiler bro
Looking at Doing a Huge Carbon fiber chassis mount wing... you think it would look good on this car?
What kind material is that and where can i buy it?
The material is a thicker pistol board more similar to cardboard and can be found at any local crafts store or dollar store! Hope that helps. The material was perfect to use for the project.
What material is this? And also where can I purchase this?
It's 1/4" pistol board / cardboard. Most dollar stores and Wal-marts carry it! cheap and great to use for templates.!
Do the wing spoiler .. bro u should make me one for my car
Looks pretty rad as a wing! wait till you see the huge chassis mount wing I fabricated.
Can u fabricate me one
🔥🔥🔥
Awesome I also made my own
Its fun fabricating your own custom diffuser, did you make yours out of plastic, aluminum, steel?
THE meterial which u have used is ??
its just template material, 1/4" bristol board from any arts and craft store.
Better as spoiler definitely
looks pretty cool as a wing!
I’m gonna make one bro
Awesome!!! Have fun getting cre8tive and building a diffuser!
Wen are you gona paint that thing bro
I wish I had time to work on it full-time. It should be in the paint booth this month!
180 IQ spotted @ 14:12 😅
0:25 NAME THE music
PLZZ
Its Looking Bad AsS! Mike. (took your advice ,Im filming my Ferrari Daytona build aka miami vice project, don't know if i will upload it or not ,but we'll see.)
Would love to see the Ferrari Daytona build. enjoyed watching your nascar vids your very good on camera and editing is on point!
You should call it a fakari fake-are-ie !!!! Y'all should paint this one!!!!
Fuckin google store ads are annoying as balls
D: