The 2.75 would be a great replacement for the old bass pro tender tubes i use to use. Hopefully Josh does all of his tube molds like this. Would be great.
Been waiting for this one. Thank you for the tutorial. Great job! I've had the same problem with the chameleon as well. But now thanks to you I know how to fix it. Thanks again Chris.
Super awesome mold! Love the color combos too! I have always wondered what a floating plastic would look like on these. Would it allow all the danglies to float up after it hits bottom and maybe open them up more?
Good luck tomorrow and Saturday brother but my favorite color is smoky shad sale a lot of that color were y'all fishing the tournaments at keep me posted on those molds when you get ready to sale
Don't own a boat here, but grew up throwing plastics and jigs for bass. Alot of plastic worms and jerkbaits and jigs. Every lure has its place. A fish is a fish, only has to fool them once for a bite. Thanks for the content, and are you still doing the giveaway for the 100,000 subs?
I have noticed on the lureworks colorant bottles the directions say to add the color to cold plastic, not sure if it makes a difference but I’m kinda curious to try it this summer
Nice 🔥🔥. What about a longer tube? I still have a pack of tubes from about 30 years ago they have a 4”body with a 1.1-2 “ tail. Haven’t seen something like that in for ever🤙🤙
Great Mold and great price. The old Caney creek/do-it mold was good but was expensive and making one at a time was painful. Only prob I MIGHT see with the AI is I use 4/0 Stupid Tube hooks in my 4" tubes and the front of these look a little short maybe. Will a 4/0 hook work?
Hey, I’ve been wanting to start making my own lures since I first found your channel a couple years ago, I’ve finally decided to just start making them but I’m kinda on a budget as I’m only 15, but have you ever seen the do it essential series starter kit, and if so would you recommend it?
I just received the two crappie tube molds yesterday & told my buddy that i hope Josh started doing his full size tubes like this. . Now i'll be selling the 4"double dipper i have to buy this one.
I use bait plastics saltwater hard for the 190 for the tails & medium for the bodies when reinstalling into the 250 on the crappie tubes. The hard makes demolding extremely easy & you can do it sooner. . I'd think the same method would work great on the big tube too.
Mold release spray works the best for tube rods/splines (such as Stoner), but it's pricey. Another option that also works very well and is WAY cheaper and available at pretty much any hardware store is PB Blaster Silicone Lubricant in the spray bottle. Both infinitely easier to work with than worm oil
I seen this right after I bought and received my 4-in tube mold from them they probably should have gave people a heads up that were buying at the same week they were releasing it should have said hey maybe you want to hold off on buying that one
Vegetable oil in a spray can works best for me. I shoot a spot on then Dab toothbrush in Vegetable oil and brush thin coat on mold. Works great for stone molds also.
when i am using the triple injector do i shoot it fast i heated up the blending block because i watched your first video again about triple in injector i tried making black and white and black triple color and i was getting swirls do think the black is to dominant to make a triple inject with those colors our should of i lighten up the black so it will work less drops
Thanks for watching, link to the mold:
anglingai.com/4-ai-tube-3d/
anglingai.com/4-ai-2d-tube/
Love you man keep it up your baits are great don’t let anyone hate we love you and god loves u
Woohoo!!! Hopefully a 2.75” triple dipped is on the horizon. This mold will save me from the time consuming tasks of cutting tails.
Yeah I'm not sure..it's all about the spline..the ability to source those determines the size
The 2.75 would be a great replacement for the old bass pro tender tubes i use to use. Hopefully Josh does all of his tube molds like this. Would be great.
AI really did something with this mold never seen before. Very awesome. Great job
It's great
Been waiting for this one. Thank you for the tutorial. Great job! I've had the same problem with the chameleon as well. But now thanks to you I know how to fix it. Thanks again Chris.
Glad it helped!
I so love the way you learn with us. This will be a great mold to add the the arsenal. I liked the triple version and how it took the color.
I have to say that triple shot is a killer color looks great
Thanks
I whispered a question in Chris’s ear and now it exists!
Haha
Nice looking tube. Colors are awesome. Thanks for sharing Chris
Tubes are fun!
Super awesome mold! Love the color combos too! I have always wondered what a floating plastic would look like on these. Would it allow all the danglies to float up after it hits bottom and maybe open them up more?
Great video, I was wondering how these tube molds work.
Fire Work Bruh! I’d Love To Show you my Custom Crappie Mold, First of a Kind Open Pour Injection Plus Skin Shots! I’m Located in Ocala FL🎣🎣🎣🎣🎣
Nice! challenge for you, make squid for trolling, offshore. With other thermoplastic formulas of plastisol, vinyl plastics…
Good luck tomorrow and Saturday brother but my favorite color is smoky shad sale a lot of that color were y'all fishing the tournaments at keep me posted on those molds when you get ready to sale
Been using Chameleon for a long time, adding to heated BP plastisol, no clumping. Great color!
Mine must be broken
Not a big tube fisherman, but, as usual awesome colors and great looking mold. Thanks.
I need to start throwing them...they intrigue me
Don't own a boat here, but grew up throwing plastics and jigs for bass. Alot of plastic worms and jerkbaits and jigs. Every lure has its place. A fish is a fish, only has to fool them once for a bite. Thanks for the content, and are you still doing the giveaway for the 100,000 subs?
Awesome molds!! Gonna have to get that one too! 😂
Weird about the chameleon too, mine doesn’t do that 🤷♂️
Mine is weird
@@WorldsWorstFishing that is weird
That's a alsome tube mold Ai as been putting out some killer stuff lately for sure brother
yes they have
Anxiously waiting on the double dip mold
It's live now
I have noticed on the lureworks colorant bottles the directions say to add the color to cold plastic, not sure if it makes a difference but I’m kinda curious to try it this summer
Nice 🔥🔥. What about a longer tube? I still have a pack of tubes from about 30 years ago they have a 4”body with a 1.1-2 “ tail. Haven’t seen something like that in for ever🤙🤙
U and Marling should do a collab soon. You're both in a good creative spot to make something insane together
Marling works for the competition.
Great Mold and great price. The old Caney creek/do-it mold was good but was expensive and making one at a time was painful. Only prob I MIGHT see with the AI is I use 4/0 Stupid Tube hooks in my 4" tubes and the front of these look a little short maybe. Will a 4/0 hook work?
Great looking baits Chris. Awesome mold. Where can I buy that size tripple injectors with mixing block?
basstackle
I really hope they make this mold up to 7-8". We use giant tubes for rockfish and lingcod on the west coast and this would slay
we will have to see what they do
Hey, I’ve been wanting to start making my own lures since I first found your channel a couple years ago, I’ve finally decided to just start making them but I’m kinda on a budget as I’m only 15, but have you ever seen the do it essential series starter kit, and if so would you recommend it?
Chris are you going to be making those to sale? Love the colors. I wonder what fire craw would look like.
i might make some for sale eventually
I just received the two crappie tube molds yesterday & told my buddy that i hope Josh started doing his full size tubes like this. . Now i'll be selling the 4"double dipper i have to buy this one.
yeah youll love it
Great video.
Thanks!
I use bait plastics saltwater hard for the 190 for the tails & medium for the bodies when reinstalling into the 250 on the crappie tubes. The hard makes demolding extremely easy & you can do it sooner. . I'd think the same method would work great on the big tube too.
i think so...the hard plastic may make filling the tails difficult tho
Will we get a chance to order from you?..Great video as always!
Awesome video as usual. Way2Go with troubleshooting
We learn together
When are we going to see the 3in version of the g open pour
Mold release spray works the best for tube rods/splines (such as Stoner), but it's pricey.
Another option that also works very well and is WAY cheaper and available at pretty much any hardware store is PB Blaster Silicone Lubricant in the spray bottle.
Both infinitely easier to work with than worm oil
Luckily like I found out with this mold...very little lubricant is needed..only on the top of the spline
The triple was killer
thanks
I seen this right after I bought and received my 4-in tube mold from them they probably should have gave people a heads up that were buying at the same week they were releasing it should have said hey maybe you want to hold off on buying that one
Sweet the tail is awesome
They come out clean too
So when’s the giveaway ??
@tracynewman5246 soon...people are still commenting on the video..the storms we had here kinda threw me off my timing too
Use tooth brushbrush. It's fast and easy. Shoot some oil on table then tap with toothbrush and brush.
I use the free acid wash brushes i got at harbor freight. Barely dip the edge of the brush in worm oil do two rods redip do two more etc. Works great.
Vegetable oil in a spray can works best for me. I shoot a spot on then Dab toothbrush in Vegetable oil and brush thin coat on mold. Works great for stone molds also.
Would like to see it in a red, white ad blue for memorial day bait
Do they still sell that tail cutter skirt cutter if not where can I find one
Do you know what burn plastisol looks like??
Always enjoy your videos Chris............all my AI molds are not labelled like yours. Is that a special request?
Not sure..some of the molds I get are final test molds...they might have engravings that the production molds don't
Those are awesome
Glad you like them!
when i am using the triple injector do i shoot it fast i heated up the blending block because i watched your first video again about triple in injector i tried making black and white and black triple color and i was getting swirls do think the black is to dominant to make a triple inject with those colors our should of i lighten up the black so it will work less drops
heating the block def helps
@@WorldsWorstFishing it still did not laminate it was swirls
Shared
Where can I order your products?
I rarely even fish tubes but I think I'm getting this mold anyway..
it makes a dang fine tube
When is the giveaway vid or live going to be posted?????
sweet awesome
Thanks
Does AI offer inserts to do two tone similar to the crappie mold?
Not on this mold to my knowledge
When are you gonna announce the winners for the giveaway
Now to figure out how to do some with chartreuse tails.
dip n glo haha
I have chameleon and never noticed it clumping in hot plastic.
Can you please recommend an injector everywhere I look at the reviews mostly say don't buy it's junk.
Basstackle
@WorldsWorstFishing thank you sir for the help
2.75" would be great
Triple is misspelled on the mold
Haha nice
I quit making tubes just because I hated cutting the tails. Dont have an excuse now.
haha nope..once you learn the mold you wont look back
Lol, at 8min 25sec, you said spray adhesive, that will be a bad day for someone to do that
Whoops
You’re very familiar with a 4” tube aren’t ya
Nah....3"