+Mudassir Hashmi yes but no as a normal iPhone charger only sends out 1amp. An iPad charger would work great. As it sends out 2.1amp you could use an iPhone charger if you only used 5 windings
Wow this is a Smart guy to save on money for soldering irons. wow I'm very impressed. now I can fix many things I have that don't work anymore. I give you props for this project.
good video a question that another kind of wire could use to replace that wire. I can use a strand of the bicycle brake wire, thank you for sharing that knowledge. God bless you.
Very creative indeed! I would like to know how long the Heat Treatment Fiberglass Sleeve will last and whether it gets burnt and needs replacement after some time. Thanks and keep up the great work!
can also use a paperclip for the center wire and a ballpoint pen tip from a pen which is copper and retains Heat very well and instead of the wire used for a coil you can use a spring out of a spray bottle! won't say where I learned this at but let's just say it works very well! also instead of a USB adapter can you use a 12-volt power output adapter /Supply
Brilliant channel! As far as project ideas, I'd like to see a buzzer/LED alarm for lost RC models that operates on a small, independent power source and can be activated by loss of power to the drone, or by bluetooth transmitter or timer, possibly using cheap solar garden lights as a base.
sir,that's a marvelous job and i need some information ,i have 1.5mm copper wire ,please till me required length of nic. hoping reply, thanks a lot for your video.
i was needing something like this. Great!!! But, i have a doubt if i connect it to my cpu's usb adapter will it damage the cpu?or the samsung charger's usb adapter ? will it damage them?if not plzz tell me which will not damage or which will be the best
@@abenamusic2948 loll my comment is so old i even forgot about you sent me through some great nostalgia man. Its been years since i was into these kind of stuff. Your reply made me come back here😂
in broken hair drier, bread toaster or maybe cloth iron.. anything heating appliances including microwave oven too i guess.. but just don't play around with microwave if you have no knowledge at all as it still hold very high voltage current even when it is off for years.. just like tv.. its a death trap..!
Not sure, but probably not long. I have heard that the ball point from a pin is copper. If you can wrap the steel around it, you'll get real hot real quick. Be careful.
that was awesome you have used an adapter with a maximum output power of 10 watts and it works!! I've wasted my money for 4 expensive high-power soldering irons and they were so bad. but the one you have made is something esle . thank you bro.
I couldn't think that a 10W soldering iron could be that useful! You are brilliant sir!!!...!!!
hi friend, thank you
+Creative Channel amazing.it works so well
+Creative Channel bro can i use normal iPhone usb adapter ? is work or not ?
+Creative Channel make mini soldering station plz plz
+Mudassir Hashmi yes but no as a normal iPhone charger only sends out 1amp. An iPad charger would work great. As it sends out 2.1amp you could use an iPhone charger if you only used 5 windings
Wow this is a Smart guy to save on money for soldering irons. wow I'm very impressed. now I can fix many things I have that don't work anymore. I give you props for this project.
One of the most useful things I've ever seen
Bro. Your videos are best.this one is very nice.
Sweet! For touch ups etc looks fun to make & definitely useful.
Do you think a 5 volt boost circuit would help in faster or hotter performance? 🤔
no just match the length of the wire to your supply
This is simple, elegant, and efficient! Kudos!
good video
a question that another kind of wire could use to replace that wire.
I can use a strand of the bicycle brake wire, thank you for sharing that knowledge.
God bless you.
Pancen mantep kreasine
nossa cara parabéns nota 100 pra vc
Esse foi o melhor vídeo que eu vi até agora
Very creative indeed! I would like to know how long the Heat Treatment Fiberglass Sleeve will last and whether it gets burnt and needs replacement after some time. Thanks and keep up the great work!
Thanks for you and very good video
very good idea. imagine that you could power this solder with a powerbank. 5v x 2 amp = 10watt dc power used. liked and subscribed
Ley de hom
V × A = I
🤓🤠😮👍🌴🌲🌹 keep up your creativity I love it thank you
Good Job My Friend
You are a very clever man! Ingenious! Keep up your creativity. And thanks for sharing your brilliance!
That thing is a beast!
its more like a soldering iron
+Gijs Soldering iron je kop.
+Pirat Carribean wow, wat een agressie
+stalinmolotov Yes.
Pirat Carribean dat heb je gehoord mannetje
hy creative channel you are good inventor
Perfeito amigo. Funciona direitinho. Obrigado.
Does it really work?
Why can't I do it?
Thx bro 😊 i made this to my grandpa and he loves it.He used it 4 times last week!😊😊😊👏👏👏👏
can also use a paperclip for the center wire and a ballpoint pen tip from a pen which is copper and retains Heat very well and instead of the wire used for a coil you can use a spring out of a spray bottle! won't say where I learned this at but let's just say it works very well! also instead of a USB adapter can you use a 12-volt power output adapter /Supply
Wait what?
Homemade soldering gun
you should make a video tutorial for your version
I just might do that ..thanks
+Full Metal Heli if you do out the link here!
Greetings from Venezuela !! awesome your idea congratulations !! look where the nichrome wire or other material which can replace you get thanks
0:05 mein Bizeps brennt :D
Tune sahi se bataya yaar thanx
what can i use instead of that fibreglass sleeving
Quem e brasil
best channel on youtube
SENSACIONAL MARAVILHOSO
From where I will get copper wire
May I use a guitar string as my nichrome wire?
yes, you can use
+Creative Channel Thanks for the quick reply! :) One more thing, are the Heat treatmeny fiberglass available at hardwares?
hi friend, i buy at the components electronics store
+Creative Channel Thanks! By the way, thumbs up for your video. :)
+Creative Channel I wish my 1A output power will do.
Brilliant channel! As far as project ideas, I'd like to see a buzzer/LED alarm for lost RC models that operates on a small, independent power source and can be activated by loss of power to the drone, or by bluetooth transmitter or timer, possibly using cheap solar garden lights as a base.
work on power bank?
yes
u r making soldering iron every day ! :D
Do not connetct this DIY to your computer, may you cause damage on your motherboard.
+James A Garfield it can draw too many amps.
ItzEima LT then you will risk killing your charger :P
That's why I blew the insides of my computer up no jokes
techspeed iiknnnnkijjhjjipooooo
OnurEGN yes the damage is big
You are so creative..awesome..
sir,that's a marvelous job and i need some information ,i have 1.5mm copper wire ,please till me required length of nic.
hoping reply,
thanks a lot for your video.
عمل رائع جدا..اول مرة اشاهد طريقة بسيطة وبدون تعقيد .
So happy that he didn't use that damn whistling song that everyone seems to use on DIY vids... its annoying.
which song?
+Mac Ward crimson fly huma huma
+I hate console Thank you
+Music Tests haha
its very gooooood
your very smart
nice work man
i was needing something like this. Great!!! But, i have a doubt if i connect it to my cpu's usb adapter will it damage the cpu?or the samsung charger's usb adapter ? will it damage them?if not plzz tell me which will not damage or which will be the best
check the output 5v and 2A that's safe
@@abenamusic2948 loll my comment is so old i even forgot about you sent me through some great nostalgia man. Its been years since i was into these kind of stuff. Your reply made me come back here😂
by far the most perfect video !
from where i will get nicrome wire please tell
Game Hub You can get Nichrome wire in Amazon
Any vape shop.. You know the alternative cigarette shop with lots of smokes as you enter..
Thank u for making this vedio. It is so easy to make.
It working 👍👌
ايه نوع السلك اللي بتلفه علي المكرونه علشان ينصهر
سلك نحاس
Very Nice Bro Idea Super
رائع جدا ولاكن هذا الشريط النحاسي من اين ساحصل عليه
I subscribed to your channel because of this video I just love your Channel
Cara esse ferro de souda ta muinto bom mais afaste mais os arames que ficao perto do arame da panta
Very good ideas
Brasileiros ???
Verdade
alan sdc eu
acho que não tem mesmo não
Essa gambiarra parece ser muito mais eficiente que muitos ferros de solda por aí
alan sdc iae
It's a very simple way.l like it
Super but I want your help
em rat thich kenh cua anh !
how you get fiberglass sleeving
in broken hair drier, bread toaster or maybe cloth iron.. anything heating appliances including microwave oven too i guess.. but just don't play around with microwave if you have no knowledge at all as it still hold very high voltage current even when it is off for years.. just like tv.. its a death trap..!
heating fibre sleeving get for meter repair shop fans repair you will get
Is that thing must?
Good job sir . . Watching from Philippines
Hi amazing for You. I need your help, can you help me for making "PLASTIC SEALER" from Trafo take from old PC speaker
That's very nice
🙌😍😍
Can you give me this soldering iron because I don't have nichrome wire. It is not available in my city.
Kamran Raja You can find nichrome wire in any electrical heater or inside a hair dryer.
+Alaa Jannoud I have heater element but it is not 0.1mm
Kamran Raja I couldn't find a thin wire too, so I made a 12v soldering iron using a 15cm of 1mm thick nichrome wire from a 750 watt electrical heater.
+Alaa Jannoud where do you live?
+Alaa Jannoud I have got a thinner nichrome wire from a 30w soldering iron element. It costs Rs30.
How much Time it need to warm up? and can I use 2cm Steel wire intead of Copper wire as the bit?
Not sure, but probably not long. I have heard that the ball point from a pin is copper. If you can wrap the steel around it, you'll get real hot real quick. Be careful.
alguém brasileiro
Natã Tenório De Oliveira eu
eu
Euu
Um aqui
eu
excelente trabajo muy educativo amigo excelente
Waah yar bhai Kmaal kr diya
Great job! This is the best creative channel by far..keep up the good work :o)
that was awesome
you have used an adapter with a maximum output power of 10 watts and it works!!
I've wasted my money for 4 expensive high-power soldering irons and they were so bad.
but the one you have made is something esle .
thank you bro.
Mantap bang aku subcribe
Update yang lain lagi
Jab fiber sleeve puri jal jayegi der tak chalake to charger ke plus minus copper bit ke jariye apas me milke short circuirt karenge kya ......
A Paz de Cristo, Deus abençoe com suas ricas bênçãos em nome de Jesus Cristo!🇮🇱💡😇
Weldone bro great zob
Simple,easy to build,efficient,compact,and.......let me think a little bit.
your video is awesome and I like it. but where did you get the nichrome wire? thank you sir.
Thanx for the video it's great
Can you tell me where I can find a copper wire in my home appliances🙏🙏🙏
At Eletronic store !!!
great idea.
Where I can buy your products you're a genius
So good well done
Nice Bro.!! This is what i been waiting for..
i love creative chanal
very awesome, maybe there's a way to improve the tip for holding it, but still cool, keep up the good work
nice video
So amazing and worth trying
How much time can be used continuously ? and The fire did not touch ?
Where did you get fiber glass sleeve and nichrome wire and copper wire
Muito bom parabes nota 10 pra você
Muito bom assistir todos seus video👏👏👏👏👏👏
عربي
thang beautiful item but what did you live in what is your country name
EXCELENTE COMO SIEMPRE
hi, can the nichrome wire be a hair dryer?
Thanks for the video. You're awesome!
jitne ki ampere or voltage wala charger me connect kar sakte he kya.. plz reply me esime fasi huwi.. hu
Its so easy and comfortable
thats awesome, but can i use a longer piece of nichrome wire, or does it have to be exactly 10cm?
Longer it is, the more resistance, therefore the hotter it gets.
Tanpa selongsong anti panas bisa gak mas
Excellent work
veryyyyyyyyyyyyyyyyyyyyyyyyy good idea.
how copper road get heat as u put slive on it please reply it nice n easy thanks
Unbelievable! Well done!
Good vids as always. Anyways, that AB glue is called epoxy
Good idea im Ideatronic
Very cool! What was that chunk of waxy looking stuff? Also, I'd like to see some solar and wind powered projects!
It's flux
Good veri nice video
i love your videos
Can u show what u likem of this soldering iron