1100HP ALL MOTOR LS Corvette! Worlds Fastest Naturally Aspirated LS
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- This INSANE C5 Corvette Z06 built by Vengeance Racing cranks out an incredible 1100HP via an ALL MOTOR LS! It spins a mind blowing 9500RPM and puts it down through a PPG sequential gearbox. This is probably one of the coolest corvettes we've seen to date, becoming the worlds fastest naturally aspirated LS ever this past weekend at the WannaGoFast 1/2 mile in Ocala, FL.
Damn that high revving LS sounds goooood! 😍
If they get the thing to hook up off the line and down the track, it will be over the 200 mph /one mile mark soon!!
Coyote swap it. Sending that LS back to the junkyard
What fuel?
Raul Rey why when you get way more out of an ls engine and more reliability
@@RRR-jd2oy 😂😂😂😂😂😂😂😂😂
coyote swap it😂😂😂😂😂😂😂😂
That LS engine would scare the hair off of your slowyote.😂😂😂😂😂😂
1100hp without depending on boost! FUCK YEAH!
Right, and how much would it be after adding boost :thinking:
I'm Not Onii-chan would probably need to to be completely rebuilt and designed
I'm Not Onii-chan I wouldn't add any boost to that engine, built strictly for motor only so that compression is probably out the roof!
Bigger set of rods an pistons, at most maybe a new cam depending on exhaust backpressure ratio. Methanol engines run 14:1 compression and big boost, and have done so for decades.
yeah right? high compression boost been done.. FOREVER. smh, kids.
This car is nuts! Sounds amazing, and performs well. In a sea of boosted cars, this one is a gem. No boost lag or boost cuts. Id like to put that engine in my Datsun. Lol
El Matador it’s not on boost
Ohhh lol
You disgust me
^^ Yeah she told us and we all laughed about that thing with your wang
NO lag? Engines like that have WAY more lag.. There is no power until you're over 6000 lol..
Imagine a big shot of nitrous in that thing. It might wake the dead 😏
You dont see many 190+mph NA cars doing 1/2 miles! Hats off to Vengeance Racing for building this badass car!
That's crazy man, all that power without any of the downsides of a turbo. Not to mention this thing revs high as fuck for a traditional pushrod V8, not everyday you hear about an LS that can rev past 9k RPM haha.
Nascar does for 500 miles straight
@@dennisrobinson8008 with less hp, let me remind you that this corvette has 1100 hp. A normal nascar engine makes 655 hp na
@@JacobJoesphI was talking about the rpm. It proves the valve train and rotating assembly can hold that rpm for 500 miles.
@@dennisrobinson8008 yea. So does old f1 cars which used v8 that revved up to 17k rpm and can do that for 53 laps.
@@JacobJoesph true
LS haters not going to like this video
There are ls haters? That's new for me
@@gp8666 yeah lots.
@@oceanwaves83 not a lot most of them just get bored bcuz almost all. Of people do the swap, i myself have ls in my family car.
The only thing better than an ls is a big block
@@miguelx7707 maybe a rotary, but torque is good to have, something honda doesn’t understand.
That engine sounds like its good for more than straight line use.
OG Drifter like track
Hillclimb car for sure
@@bruno100carro drifting just boring though, put it in a single seater or a group C Type car
@@napalmhotdog4365 drift is not boring
but its designed only for straight line use so if you put it in a track car for example, the engine would heat up too much and wear out easily.
Ha, 455@9200RPM? So what you saying is your peak piston speed is the same as your half mile trap? 3/4” rod bolts? 😂 Now that’s a motor to envy. 147.45 hp/liter. I want that parts list.
Thomas Shuman Big cubes small blocks/ls are killers
hahahahahaaaaaaaaaa freak
Thomas Shuman its big bore/ short stroke combination.
while im all about big bore/ short stroke , LS bore max out at 4.185" so for this to be a 450cube that stroke is around 4.125" which is long as they get besides a Oldsmobile 455 with its silly long 4.25". mean piston speed has got to be wild.
LS 7 bore spacing is 4.400" so it cant be that short even with Siamese sleeves. unless its a custom block. With a standard 454 crank throw of 4.00 and bore of 4.250 that shit would be screaming at over 110mph mid stroke. Even if it was a 4.500 bore & 3.570 or close it would still be about 98mph. My math must be wrong because I've got that piston at peak 5,840 G's. That's more than most v8 race motors.
The SAM camaro was 1000 hp N/A years ago and they almost got 7's in the quarter with a cat fish maro and over 3000 pounds
and another unrelated cool story, don garlits ran 200mph in the 1/4 back in 1964
Catfish Camaro lol. F-Body i would assume haha.
lol if only it could hook! sounds like a NASCAR too
Noel Aito probably would hook if he let some air out the rear and heated up a little better
Doesnt need to hook, its a speed event.
He could get a higher speed with increased traction in beginning of the run
LP187q lol.. you still have to hook dum dum
TTime685 some people don’t have common sense
Damn that's some Ferrari type shit. 9500rpm
About to LS swap my civic 😈
go for it man
i'm down
That would be sick dude
Why go B18 when you can go B20??
@@leroyjenkins6809 you mean K24 big twin turbos?
The beauty of GM PERFORMANCE!
LSX N/A revving at 9200 rpm, that's good work right there.👍
Lol... The number of people in the comments who are completely in denial over this is hilarious.
The link below is from FIVE years ago, yes FIVE years ago. SAM Tech made 1064hp @ 9,000 rpms (engine would spin past 10,000 but it didn't make any additional power there). An engine which currently makes 1104hp, and is for sale if you'd like to unlock the secrets of 1100hp naturally aspirated LS engines ;)
For those griping about piston speed, this engine again is 5-years old, it has run 8.01 in a stock style suspension F-Body @ 170mph+. Whatever they're doing, they've got it worked out.
In regards directly to piston speed, this is only ~27% higher piston speed than a stock LS7 engine spinning a 4.000" stroke to 7,000 rpms. And this engine is completely optimized to carry out this task, it isn't some factory beater that's going to melt a piston from increased load.
These engines don't use your standard off the shelf aftermarket pistons, rods, cranks, rocker arms, etc. The crankshaft likely costs ~$5,000 give or take, they are specially heat treated and cryoenically tempered to handle these increased loads. It's not just a billet callies off the shelf crank, and many of the other parts are the same way. It's taking the LS engine to its full potential.
th-cam.com/video/fnq7qja7As8/w-d-xo.html
William Wallace 8.01 automatic or manual trans though?
🖐🏼Jazz hands🤚🏼
Saw this car in person at a Wanngofast event, it sounds absolutely incredible
That sounds so sick. Revving the beans out of that deal.
this vid made me realize c5/6 still more attractive then c7
s7v7n ikr
I love the c6 for light weight and badass look when murdered like banes old c6 but love the c7 z07 clean look and interior. If it were to me id build a c6z06 to race and have the z07 as the night out car with my fiancé
*than*
Same thing everyone said when the C6 came out
Yessss
My favorite car keeps getting faster! I'll see yall at wannagofast with my c5z!
Best sounding corvette ever! That thing sounds gnarly, I can't imagine how it sounds in person
Sounds like the 6.7L Roush Yates V8 used in Ken Block’s Hoonicorn
That car sounds amazing.
Sounds nice. Crazy that the ls and ohv motor can handle that. Dohc motors rev high. Must have some serious high compression and CNC ported heads with some super bad ass lifters pushrods roller rockers arp studs for sure and a blue printed reinforced motor. Not to mention the custom plenum and fuel system... Rails pump/pumps the works. Modern technology is improving performance.
Joel Schub well probably sleeved to handle that kind of power. The stock LS sleeves won’t hold. But the darton race sleeves would work.
If this thing had equal length headers to collector. It would sound even more utterly mental
One of my favourite cars ever. Hope you guys do another special on it soon.
That corvette is pure monstrousity
9k rpm ls + sequential omg, say it aint so i want i want i want !!🤗🤗🤗🤗 .. innovation. Finally sum1 else who thinks outside the box!! Vengeance racing big ups!!!
that is one brutal fast 1100hp.
When your upshift is like the explosion at the end of a fist bump.
Love NA power !
Those 19 dislikes are from ford and dodge fans
I'm not a Chevy fan but huge respect to this thing
If I get a corvette like this ,I won't ask for anything else !
Fucking nasty. Probably running around 15:1 compression ratio and on high octane fuel. That car is bad ass and so are the guys at vengeance racing
Jeeeeezuusssss...u know ur shits quick when stuff starts to pull back to rear of car lol
Would've gone 200mph if that baseball hat wasn't sliding around on the passenger floor board. ;)
Digging that squadron sticker.
You have just got to love those mozez heads. 👍👍✌✌👊👊
Badass.
Spinal Tap spins 11,200 destroked etc.. lsx block
smokey 88 you can do a budget destroker with a 4.8L Silverado bottom end and a LS3 too end, easy 650-700 hp and 9500 rpm. Torque is lower but that longer power band means in a roll it’ll kill lower revving but torquier v8’s in a roll...
I'd love to hear some cam and valvetrain specs.
man i love this this is how its done. anybody can make power with a blower or a turbo. real challange is to get this power like they did all n/a......
Beautiful piece of engineering, but I am confused why they went with so much power if it seems like he even has to demonstrate throttle control in 5th.
Awesome build!
What are your quarter mile times with this?
This guy didn't listen to any type forums 1000hp+ on na
I can just imagine the compression ratio... jeezes
Let's see your Coyote do this on motor. 😂
MOST H8D You beat me to it bro. Lol. Good shit
With this amount of money, any well built motor can.
reaper519 yep. Fuck for the money they got in that fucker I could make a Toyota 1zz make hp.
Robert Sestito Im so sick of you, "for the money" idiots. You dont think Ford teams running 1/4 mile have huge budgets? Morons completely missed the point, and that is a Coyote will never perform n/a like this. True Ford guys know what im saying. Keep the butthurt replys coming, but facts are facts
Dont get me wrong this thing is fucking sick! But on the other hand lets see a "bone stock LS" run 9.30-9.40 in a 1/4. And now that they come out with the gen 3 coyote that record with probably get even faster. Not trying to hate on the LS cause I love these motors too, they are both very good platforms to mod TBO
That thing is a beast.
I wished Ruby could be this well built
Cars like this are the reason pushrod LS's are still made. You don't need DOHC to spin 9,500rpm or make 1,000 na horsepower. There is absolutely no reason to make a bigger, heavier, more expensive engine to do what an LS can already do.
Just imagine the throttle response this thing must have...out your foot down in any gear and you move instantly
tesla owners btfo
@@bakedandsteakedthis thing will beat a Tesla sorry to break it down to you
@@sekouchill yes that's what I was implying. I think. Unless I used my hip internet slang incorrectly.
I saw this at Ocala holy fuck it’s fast
Is it using a different firing order or special crank? Sounds way different than "normal" high rev OHV builds. Someone mentioned NASCAR sound but to me this sounds much different than the NASCAR engines, and NASCAR also spins 9,000+ RPM.
Christopher Mundahl and that’s all the time... that’s a very impressive feat. To be at 8500 rpm to 9000rpm all the time around a circle with no breaks. That’s fckin amazing.
the ls uses a different firing order from the small/big block chevys from the past. sounds smoother
Wow that is incredible! Love the sound of that LS! Curious to know why they are not using the Traction Control Feature that ProEFI is more than capable of?
He had his spirit fingers lol 😂
That's a beast!!!! All motor none VTEC nice
c5 is such a beautiful car
Thing revs out almost as much as my 1.3
Where are all my OHV brothers !!!
Was he running spray? If that was a true all gas all motor.... that's legendary
Josh Lewis all motor. Kind of like Pro Stock
You can only imagine puting at least 14 lbs of boost on this monster will be like...😲
sounds beautiful
Wow, didn't know an LS could reach 1000hp N/A.
The Coyote boys will not be happy about this.
The best part is this isn't even the first LS to top 1100 hp :D
SAMTech made 1104 ~2 years ago from 435CI
there are many dodge, chevy and ford small blocks pushing 1100 hp. Ausi pro-stock cars are pushing 1100+hp on only 400ci at more than 10,000 rpm on small blocks.
Don't see where I said there wasn't?
I was replying to top comment.
that thing sounds great!
Wow so impressed rite now👍
Sounds insane
Eddie the driver is a awesome guy.
Badass! Wouldnt the car do alot better without the long gratuitous rolling burnout though? More traction, the better time?
I hope that’s a 99-00 FRC and that they didn’t turn one of 352 Speedway Z’s into this.
Previous mod red/speedway white Z06 owner.
No 4cyl nor 6cyl n./a. can make this claim without a turbo! But a V8....!
derjoh1986 V10, V12, W16 can...
Well they can, just give it some time, cause they pushing 600+ na 12 rpm and I'm a v8 guy
derjoh1986 you're one of those guys huh
Dexter Sullen 'TRUTH' they will plateau eventually, and it won't be anywhere near 1100hp. There are two factors when calculating horsepower... rpm and torque. Assume they're making 600hp at 12k rpm with a 4 cylinder... that's 260 lb-ft of torque @12k. To get even 1000hp, they would either need to raise their max rpm to 20k (and maintain their torque output at that rpm), or they would need to make at LEAST 430 lb-ft of torque at 12k rpm. That's not happening from any current 4 banger or v6.
Of course not all engines are going to have the same power band, but low displacement engines like v6 or I4s need revs to compensate for low torque (courtesy of low displacement), and they will never get 20k rpms.
Gerard Smith
Nope, I had and moded 4, 6 and 8 cylinder 8 motors.
I got to see this car at wanna go fast heavens landing not long ago
Car is insane 1100 hp NA and 9500 rpms 😳. Wonder how long the motor lasts?
Nascar last 500miles at over 9000 rpm
they must have stuck a flat plane crank in it, becuase flat plane engines rev alot higher then normal one, and the sound is so different that it souns similar to a super car, such as a mclaren, that said i could be wrong but i get the feeling thats one of the upgrades.
Jonathan Rutledge not necessarily, just need to destroke a cross plane crank, can easily attain 9500 rpm and make tons of power up top.
1100HP with no boost :0 Impressive
Roll race sounds scary
What an effing monster
what are the cam, heads, and crank specs on this im almost 100% sure it's got a little short stroke crank for all you stroker guys to drool over
That noise is intoxicating
this beast will surly get some pro stock driver's attention
alohim king no they won't. It didn't run that mph in a 1/4 but a 1/2 mile
+roy richardson of course it didn't as this isn't setup for the 1/4 mile run's I'm talking about the engine it self
Bad ass vette but I don’t like the position of his harness given the unthinkable wouldnt that compress his spine ?
LOVE seeing NA builds in this internet era of boost
Wonder how much hp it could make with a dual over head cam engine fully built
Probably not at much as this
Thing sounds like the Cadillac LMDh
Still Alkandri from Kuwait 🇰🇼 got world record with 6 speed stick shift 306KM/h
Just awesome
Was there a competition to determine if it is the record holder, or is this another TH-cam "record"?
This was at the wannagofast halfmile event. There is no faster naturally aspirated car. 👍🏻
At 2:09 it sounds a little bit like a koniegsegg
Enough fuel to fuel a fukin rocket!
Thank GOD! this whole turbo fad got old quick and has been going on for WAY too long. Love forced induction (there’s more than turbo) but n/a is also awesome.
Fucker went down the track like it just drank a few pints of lean!!!
crushing it!
so... let me get this straight... he said 450 cubic inches? And that is an OHV engine?
At 1:40 sure sounds like a turbo.
I wonder how long that motor can last
Bro is that the transmission I heard squealing as it took off
I wonder how much hp can viper 5th gen 8.4l v10 make na 🤔
best best LS ENGINE
what kinda fuel does it run on? and whats the compression?
148.5 hp from one litre 🤯