Simple and smart combination
ฝัง
- เผยแพร่เมื่อ 15 พ.ย. 2024
- Visit: rosta.com
Self-adjusting ROSTA Tensioner
The ROSTA Tensioners operate by a rubber torsional spring with four pre-tensioned special rubber inserts. The pivoting arm dampens shock loads, vibrations and provides a constant tension to the drivetrain. Vibrations or bouncing off due to lengthening are no longer an issue with the self-adjusting ROSTA Tensioners! The self-adjusting ROSTA Tensioners offer a smooth and quiet operation. The single bolt feature offers an easy installation and adjustment. The ingenious concept compensates stretch and dampens vibrations automatically. Which results in longer service life of the drivetrain. Downtime and maintenance costs are kept to a minimum.
Self-adjusting ROSTA Chain Tensioner
They should always be mounted on the slack side of the chain drive. The tensioner arm should stay close to parallel to the strand, in the running direction. The simple installation is made by one central bolt. This allows a flexible positioning. Only one hole in the framework is needed. The sprocket wheel set is easy adjustable. Position the wrench close to the flange-bottom and rotate the housing, bringing the sprocket wheel into mesh. Set the pre-tension to approx. 15°. There is also a front mounting option available. This design allows a simple and easy tightening from the front. The final adjustment of the tension is based on the running behavior of the chain. If excessive vibration are noticed, simply increase or decrease the tension until you obtain a smooth run. As an alternative to the sprocket wheels you can also use ROSTA chain riders.
Self-adjusting ROSTA V-belt Tensioner
The preferred location of a V-belt tensioner is on the inside of the belt drive on the slack side. The tensioner arm should stay close to parallel to the strand, in the running direction. The simple installation is made with one central bolt. Either back- or front mounted options are available. Position the wrench close to the flange-bottom and rotate the housing. Set the pre-tension to approx. 15°. Check for proper tension based on the belt manufactures guidelines. Simply rotate the housing until you obtain the right tension. The ROSTA tensioners automatically compensates belt elongations, hence there is no need for regular re-tensioning. Over-tensioning of the belts is avoided and drive operating efficiency is enhanced. The belts can be replaced in moments without special skills and tools. A smooth and quiet operation by reducing slippage and over-heating is assured. Pulley and belt life is significant enhanced. Tensioning outside of the belt is done with a ROSTA tensioning roller which dampens vibrations efficiently. The increased arc of contact prevents slippage to ensure an efficient power transmission. Any other special accessories can easily be mounted on the tensioning arm.
ROSTA offer a wide range of Self-tensioning chain- and Belt tensioners including different accessories. ROSTA belt tensioners - for a smooth run - longer service life - less maintenance - cost saving.
Why you fix tensioner in centre in v belt case?
Excelente mis saludos desde Argentina!!
Where to buy?
I'm looking for a job with your company
How to determine the size of the tensioner you need based on your transmission? ASA 160-1 chain; 7,5 KW;
drive sprocket Z17 a 6.3-33.4 RPM; driven sprocket Z129 a 0,83-4.4 RPM
Hallo Fernando, Thank you for your question. Best would be to contact a sales person responsible for your area rosta.com/team/
@@rostaag719 the manufacturer of the chain too and the sprockets too
martin sprocket does have a PDF file you could download too i do have this in a book got from a friend too its called the bible of Sprocket lol
Martin is awesome to work with too
Thanks for the vid!!
Very nice.
VERY NICE
does not make sense in Australia that if we run anit-clockwise here they have to run it clockwise there? when i was their ask for whiskey all i got was Shirley Temple to drink there lol
one of them told me i had a half-filled bottle still a stupid question to ask a Canadian i saw was whiskey to drink lol
i was out at a restaurant a person came up to me he remember me from when i was in Australia as a Canadian i was to honour him at my place to have a BBQ and had him and his friend picked up by limousine too he drive a wail with them then stopped they had to be blindfolded he said
so it was going there they took off the blindfolded too their pic of their face was taken as a prank to they had never been on a horse at all to work out better too rode for about an hour to told the take was on secret Indian hunting ground to had hunting rifle with both of them too don't worry they were fake gun too lol
Indian found them both waiting for me to come back lol they had a poster of both of them made up they were scared out of their mind too they got the stack to the ground too when i came back into the picture to i did shoot to of the Indians before i was shot to trying to cut them lose lol too
they never tasted the buffalo meat as i had planned it one of them did have to bring up the two poles used for they did find out too they were put there to burn at the steak lol
i don't think they are going to be back here
What the hell are you on about?
Haha I need that